Postby 10-01 » December 12th, 2014, 11:17 pm
did that conversion already , you need to find 17c 15 calipers and rotors , from a ek9 or a accord , jus carry it in a machine shop drill the rotor back to 4x100 , the machine shop will know wat to do should cost about $150 , then u need to have a SiR spindle to mount the caliper on to it , please note a normal ek3 spindle will not work , and u jus need to put on the rotors and bolt up the calipers and u have bigger brakes , but u neeed a 1'' brakes cylinder also
i may sell my set up pm if u interested as im going will-wood soon my set up is currently on my car , working fine and the abs works also