Sunday, April 20th, 2014



- It is currently Sun Apr 20, 2014 2:27 am

All times are UTC - 4 hours


Jump to:  


Post new topic Reply to topic  [ 5 posts ] 
Author Message
13 GHOST
 Post subject: E 15ET SAFC INSTALL
PostPosted: Thu Aug 02, 2012 5:46 pm 
Offline
Riding on 13's
User avatar

Joined: Thu Oct 28, 2004 12:18 pm
Posts: 12
Location: D 1/4 MILE SHOP
Hi tuners i have an e15et in my b12 and going trough my car parts box came across an Apexi SAFC and i am trying to wire it in but having a problem with the maf wiring and number to set the safc to in the settings the ecu digram i got off a .au web site has some difference in the pin layout have any of u tuners wired any one of the safc's on an E15ET and can help with the maf pin layout i need to know the return signal pin from the maf to the ecu and the number for the maf on the safc below is the digram i got Thank for any help


Attachments:
ecu-wiring2.jpg
ecu-wiring2.jpg [ 143.07 KiB | Viewed 308 times ]
Share on FacebookShare on Twitter
Top
 Profile  
 
.:PROZAC:..
 Post subject: Re: E 15ET SAFC INSTALL
PostPosted: Wed Aug 08, 2012 7:17 pm 
Offline
punchin NOS
User avatar

Joined: Wed May 07, 2003 9:58 pm
Posts: 4229
Location: Mississauga,Ont.
Easiest way to do it my friend is a continuity test. From Maf plug to ecu plug, real simple.


Top
 Profile  
 
Razkal
 Post subject: Re: E 15ET SAFC INSTALL
PostPosted: Sun Aug 12, 2012 11:52 am 
Offline
2NRholic
User avatar

Joined: Sun May 30, 2004 2:33 am
Posts: 5014
Location: Gone Fishing...
keep in mind you are gonna have to CUT the maf wire to the ecu. from MAF>safc>ecu

like Zac said, do a continuity test and locate the correct MAF wire.

not sure of the IN/OUT settings for your application, i used 4/4 for my rb and a friend uses the same for his sr. unless your maf is from another motor, i'd start with 1:1


google the installation manual...its available on a couple sites readily.


Top
 Profile  
 
13 GHOST
 Post subject: Re: E 15ET SAFC INSTALL
PostPosted: Sat Aug 18, 2012 6:52 am 
Offline
Riding on 13's
User avatar

Joined: Thu Oct 28, 2004 12:18 pm
Posts: 12
Location: D 1/4 MILE SHOP
Thanks I have done a contiunity test ane found the wires from the maf but not sure witch is the retune signal wire A B C or D


Top
 Profile  
 
.:PROZAC:..
 Post subject: Re: E 15ET SAFC INSTALL
PostPosted: Sun Aug 19, 2012 9:25 am 
Offline
punchin NOS
User avatar

Joined: Wed May 07, 2003 9:58 pm
Posts: 4229
Location: Mississauga,Ont.
1 wire would the ground, the second a 12 volt and the third the 5 volt read wire, not in that order.
With your multimeter you can eliminate the 12v and ground.
Zac


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 4 hours


Who is online

Registered users: a_hardcore_trini, ARAMBHAJU, Bing [Bot], Caesar_T, Cheddar, D_Magicman, Dauto, DaveSingh, DooMRR, Exabot [Bot], Google [Bot], Google Adsense [Bot], handsomeRob2837, Hook, kadatt, kb68, kjoseph, Mercenary, mobzz, MSNbot Media, oxigin, reddo_tuner, stefo, voiceofatrini, whyteliver


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
3NE-2NR