Page 1 of 1
qg gearbox question
Posted: May 9th, 2012, 6:20 pm
by jayzinz
Is it possible to to change the qg gearbox hydraulic system to cable?
i would like to take the engine and gearbox from my almera and transfer it to my b13 .
Re: qg gearbox question
Posted: May 9th, 2012, 6:23 pm
by wagonrunner
clutch cylinders can transfer as well. why look into changing it to cable?
Re: qg gearbox question
Posted: May 9th, 2012, 7:53 pm
by jayzinz
Cool ,thanks wagon runner.
I thought cable would be easier to do because most cars that age use it.
Re: qg gearbox question
Posted: May 9th, 2012, 8:09 pm
by wagonrunner
Granted. but C32 Laurels take clutch cylinder installs. so everything can.
Re: qg gearbox question
Posted: May 10th, 2012, 6:17 am
by turbosingh
As Wagonrunner said just transfer everything over pedal,lines an clyinder..
Re: qg gearbox question
Posted: May 23rd, 2012, 11:37 am
by black start
so the clutch pedal and cylinder from the almera will be bolt for bolt on the b13?
Re: qg gearbox question
Posted: May 23rd, 2012, 6:01 pm
by yakuza
Neither the brake nor clutch pedal from the Almera will work in the B13, you need to get a Y10 hydraulic clutch pedal.
Re: qg gearbox question
Posted: May 23rd, 2012, 6:20 pm
by wagonrunner
yakuza wrote:Neither the brake nor clutch pedal from the Almera will work in the B13, you need to get a Y10 hydraulic clutch pedal.
how come? the mounting point. if so, can't that be fabricated?
Re: qg gearbox question
Posted: May 23rd, 2012, 6:31 pm
by yakuza
Yes it could be fabricated, but why go through the trouble when there are pedals that work bolt for bolt.
The almera pedals are very different from the B13 ones.
Re: qg gearbox question
Posted: May 23rd, 2012, 6:40 pm
by wagonrunner
point.
reason i ask is that's the same issue in a C32 with a RB25DET.
any hints?
Re: qg gearbox question
Posted: May 24th, 2012, 6:11 am
by yakuza
You could try one from an S or R chassis.
Re: qg gearbox question
Posted: May 24th, 2012, 5:20 pm
by wagonrunner
Have one from an S13. top bolt doesn't line up though.
Re: qg gearbox question
Posted: May 25th, 2012, 6:48 pm
by yakuza
Well you may have to fab up something, I know the S chassis pedals work on the C33, not sure which one is bolt for bolt with the C32 though.
Re: qg gearbox question
Posted: May 25th, 2012, 7:07 pm
by Anil_Sooknanan
i got the hydraulic pedal to fit the B13/B14/Y10/N14/N15
Re: qg gearbox question
Posted: May 25th, 2012, 7:09 pm
by black start
anil, wats the price on the pedal?
Re: qg gearbox question
Posted: May 25th, 2012, 7:15 pm
by Anil_Sooknanan
$350.......
Re: qg gearbox question
Posted: May 25th, 2012, 7:32 pm
by black start
will it fit the b12 as well?