HELP PLEASE!!!! almera idling problem(update)

noise maker · Postby **noise maker** » April 10th, 2014, 6:08 pm

OK tuners i cleaned my throttle an now my rpm is 1500 at idle speed does anyone know how to solve this problem please tell me

the mechanic scanned the car and tried to fix it same problem does anyone knows what to ? please help

Cheddar · Postby **Cheddar** » April 10th, 2014, 10:35 pm

You have to also clean the (IACV) Idle Air Control Valve. It is right under the Throttle Body intake in the QG engines.

skylinechild · Postby **skylinechild** » April 11th, 2014, 1:41 am

i'm guessing you have the e throttle - if i'm correct a simple relearn procedure will fix - either have it done manually or using a diagnostic tool

noise maker · Postby **noise maker** » April 11th, 2014, 8:46 am

skylinechild wrote:i'm guessing you have the e throttle - if i'm correct a simple relearn procedure will fix - either have it done manually or using a diagnostic tool

no it cable thanks for the help btw guys will give an update wen im back from the mechanic

Cheddar · Postby **Cheddar** » April 11th, 2014, 8:56 am

With these cable type throttles also after a few runs the idle stabilizes. Try lubricating the outer spring also that controls the butterfly where the cable connects to the throttle. If this does not help well you'll just have to adjust the idle screw which is a last resort though.

noise maker · Postby **noise maker** » April 11th, 2014, 9:03 am

Cheddar wrote:With these cable type throttles also after a few runs the idle stabilizes. Try lubricating the outer spring also that controls the butterfly where the cable connects to the throttle. If this does not help well you'll just have to adjust the idle screw which is a last resort though.

i adjusted the idle screw and tried fixin it on the scan tool it helped for a while bt i went back up however the scan wasn't completed

skylinechild · Postby **skylinechild** » April 12th, 2014, 12:29 pm

ensure the IACV is also cleaned properly and reinstalled correctly and functional.
some recalibration may be in order

korolla · Postby **korolla** » April 12th, 2014, 6:45 pm

you need to do another clean and rescan and it will solve your issues it easy to solve, I am accustom doing this for my customers

deivid · Postby **deivid** » April 23rd, 2014, 9:56 am

you said you cleaned the throttle body with what may I ask ?....also do you know how to address the tps setting ?

noise maker · Postby **noise maker** » April 25th, 2014, 6:28 pm

got tru tuners change the throttle body paid 200 by bicks

X_Factor · Postby **X_Factor** » April 25th, 2014, 10:09 pm

just curious, was it working properly before and u was just doing usual maintenance
or did u experience some probs and decided to clean?

noise maker · Postby **noise maker** » September 29th, 2014, 1:46 pm

X_Factor wrote:just curious, was it working properly before and u was just doing usual maintenance
or did u experience some probs and decided to clean?

well honestly i got a slight difference in my accerlation bt didnt made much of a difference but how ever with the new 1 it was really dirthy ran it so a few days and after cleaned it myself this time and it idles way more smooth

turbosingh · Postby **turbosingh** » October 1st, 2014, 9:12 am

Obviously when you clean the throttle body the parameters will change and the car will idle higher to less friction and the brain will take awhile for it to readjust.Usually happens in QG,MR,HR and will set back in place after continuous driving.

Sundar · Postby **Sundar** » October 1st, 2014, 10:33 am

because the brain will learn your driving pattern?

noise maker · Postby **noise maker** » October 13th, 2014, 7:16 pm

well for the brain to learn i tink a idle learn is needed how ever i experiencing another problem the car runs lazy and kinda stutter like between 40-60 it like something grabing and letting go and jerking the entire car