Hey guys, this is my friend's Build, it involves a Mazda Series 5 13B contained in the engine bay of a Box lancer....

For now I'll show you guys what it looks like and will give details later.










































Feel free to post comments.

Note that its not finished work is still being done, also Haltech E8 was recently installed.

_________________
Greddy
Mallory Ignition
K&N
Turbo Smart
NGK

could've been abit cleaner but its alot more than i have done so far. As long as its not another sr20det...i have no prob. rotary powah ftw
nice setup with the aeromotive fuel pump and surge tank tho.
is he putting a cage in that thing??

_________________
...its not the tyres you hear screaming...its the road!!

sweet build.not very often u seein a box lancer with a rotary.dat is an extremely huge turbo.this looks like it will be sharing its fair share of licks on the track.
he needs to put a roll cage cuz this thing whippin out loads of power.
have fun with the project and be safe.

Lancer with Rotary engine and skyline rims and brakes, talk about douglarisation , the twin pumps, surge tank and fuel cell plus the management, says some thought went into this, swap out the battery for a sealed one in a battery box, fabricate a roll cage and custom dash, throw in a 4/5 point harness and you on dey.
As the car is scrapped out was anything done to make the chassis more rigid (stitch welding etc)?


Nice

_________________
Shattering the stereotypes by actions not words© eliteauto

100 point for originality!!! atleast its not anoter sr20 lancer

you need to work on cleaning up the engine bay

sweet project man

Looks real cool,but be carefull that back-end could cause yuh brake fluid to boil(pic.#4)very dangerous.I would insulate or re-locate,just my 2 cents

good job ...should have been a bit more clean...

_________________
"2Pac."

I have a new high volume Holley pump that I bought for a A31 turbo cefiro project awhile back.. need to sell now if he's interested...

damnnnn now this is a project i would love to see run
very different and original. props to the owner

_________________

will this stay STRAIGHT on the road? That is SERIOUS POWER

not too shabby
just needs a little bit more work to neaten her up.

at least it isn't another sr20det in there.

_________________
PSN - aarif10

Ahhh...the second of it's kind!!

cl101, ask sheldon bout the one down on his side

Nice work, as tsuchi said, could haev been cleaner, but its still awesome, looks well thought out, link a (proper) cage or half cage atleast and you'll need something wider than 205s in the back man

Nice work, keep us updated nuh

_________________
FS: One (1) set FET Sports 16" staggered wheels [5*114.3; 16x8 front; 16x9 rear; three piece lightweights]

i love how the cooler looks...awesome..nice job..would enjoy seeing a run and how it performs

great concept....im having issues with the trunk area nd the "sturdiness" of it though....from experience, when you luanch teh car hard, things will move about....get a boat battery box for that battery, and duct teh cables better...


safety fuss meng!!!

_________________
...You like a SAGHS virgin tryin to explain the finer points of buttsecks...

Good thing I never followed up my project thread

_________________
+ =

good battery box this
http://www.moroso.com/catalog/categoryd ... code=42001

_________________
PSN - aarif10

M6 is right, that is being replaced with a bigger better indash MC and Brake Booster.
Guys just wanted to say work is still being done on this vehicle and it may not look complete as yet. Still while testing this Car on 5psi there was a lot of wheel spin and traction problems.

_________________
Greddy
Mallory Ignition
K&N
Turbo Smart
NGK

I love the concept, just wish it were a bit cleaner!

now yunno i doh put water in meh mouth...but cudnt yall have found a entire shell rather than weld up one?



i not saying that yall will drive irresponsibly, but in the event that something is to happen....that structure there aint looking too whole some. We hope this will be addressed.

in retrospect..iif i had to do Dougla over again, i'd instal la half cage...these cars have age...over 20 yrs in some cases and that equals "ole iron" that is fatigued and brittle really.

Really hope yall pay attention to those structural details in an effort to have a safe project...



Tally ho!!

_________________
...You like a SAGHS virgin tryin to explain the finer points of buttsecks...

Would've flared the rear fenders and put on some seriously staggered wheels.

Talk about thinking outside of the box (no pun intended )

_________________
S-Chassis Trinbago Facebook Group

Local blog MotorEdge™

there more lancer like dat project ehh
but job well done anyway, u guys got balls
wat kinda back end it have doh?

_________________
Downes Digital Studio HD
http://www.youtube.com/user/DDigitalStudio
https://www.facebook.com/DownesDigitalStudio

The car is not finished people lots more to be done. . . such as Roll Cage, tidyin things up and tuning/porting for 30PSI

_________________
Greddy
Mallory Ignition
K&N
Turbo Smart
NGK

30PSI

would love to see that biatch get traction. as the other guy said the fenders should have been flared .. for use of slicks and such

_________________

All in time....

_________________
Greddy
Mallory Ignition
K&N
Turbo Smart
NGK

if ever a track is to come(so i heard one is already 100% secured but by a private person, so just some time) Then this might be something nice to make a full race car, like how monster sunny was done, seeing that they are behind this build too

Preferably I would've liked to see it streetable.

It's nice to see something go fast down a 1/4 mile but knowing that it can drive home after the run and it can be used to go to work the next morning... that's just beautiful.

_________________
S-Chassis Trinbago Facebook Group

Local blog MotorEdge™

Nice build, Real Power there under the hood.....but you need to clean things up under the hood and take the seats out and repaint the inside, then put a nice set of roll cage with 4 or 5 point seat belts and re do the dash..... Now rotary in a Lancer is nothing new and its not rear either, its been done alot of times in the past there in Trinidad, You will have to stable the suspension and put some traction bars because you will have alot off traction issues......

Good luck with the nice build, you make good numbers on the track in the future....when Trinidad decide to put down a track.....

_________________
Have a nice time at the track
00 Civic SI
Hondata S300

Yeah guys, lots more to be done. I just wanted to give you guys a "sneek peek" and btw the body is generally in a good condition and till its fit to do so the car is not on the road.

_________________
Greddy
Mallory Ignition
K&N
Turbo Smart
NGK

anymore updates?

_________________
Downes Digital Studio HD
http://www.youtube.com/user/DDigitalStudio
https://www.facebook.com/DownesDigitalStudio

look forward to some updatesregarding the safety and clean up

_________________
"2Pac."