TriniTuner.com  |  Latest Event:  

Forums

1ZZ TO 2ZZ ENGINE SWAP

It's all about 4AGE, NZE, 3SGTE, 1JZ, 2JZ etc.

Moderator: 3ne2nr Mods

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » June 20th, 2010, 10:29 pm

LOOKING TO CHANGE OUT A 1ZZ-FE ENGINE TO A 2ZZ ENGINE IN A ZZE-122 COROLLA.
IF YOU KNOW ANY PROBLEMS I MAY ENCOUNTER.
PLEASE RELATE!

User avatar
eliteauto
TriniTuner 24-7
Posts: 14016
Joined: March 10th, 2006, 1:36 am
Location: Love is progress, hate is expensive
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby eliteauto » June 20th, 2010, 11:11 pm

swapping why?

User avatar
cinco
TriniTuner 24-7
Posts: 18211
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby cinco » June 21st, 2010, 2:55 pm

it will bolt in but you completely have to rewire for the vvtl-i to work
9thgencorolla.com has alot of talk about this swap

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » June 21st, 2010, 9:58 pm

MY 1ZZFE HEAD GASKET BLOWN. INSTEAD I DECIDE TO UPGRADE IF I GET THE FULL CONVERSION OF A 2ZZ ENGINE. IF I GET THE HARNESS FOR THE 2ZZ WILL IT BE HARD OR PLUG AND PLAY?

User avatar
cinco
TriniTuner 24-7
Posts: 18211
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby cinco » June 22nd, 2010, 6:52 am

please kill the caps
and the harness will make things easier but your dashboard and ac i believe will not work without some work.

User avatar
eliteauto
TriniTuner 24-7
Posts: 14016
Joined: March 10th, 2006, 1:36 am
Location: Love is progress, hate is expensive
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby eliteauto » June 22nd, 2010, 10:02 am

conversions like this I suggest you buy an entire front half and do a complete swap, it becomes plug and play, there are a couple 2zz halves around

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » June 22nd, 2010, 11:26 am

YES. GOT A COMPLETE FRONT HALF WITH A 2ZZ AND ALL THE HARNESS, NOTHING CUT.
GOING TO START INSTALLATION NEXT WEEK.

User avatar
eliteauto
TriniTuner 24-7
Posts: 14016
Joined: March 10th, 2006, 1:36 am
Location: Love is progress, hate is expensive
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby eliteauto » June 22nd, 2010, 11:52 am

nice..

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » June 24th, 2010, 4:51 pm

PIC OF THE 2ZZ TO PUT IN
Attachments
DSCN1076.jpg
2ZZ PIC IN FRONT HALF
DSCN1076.jpg (22.95 KiB) Viewed 11145 times

User avatar
TRDcorolla
Riding on 18's
Posts: 1751
Joined: November 28th, 2007, 2:24 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRDcorolla » June 24th, 2010, 8:52 pm

nice it looks like its out of a runx or feilder cut from the looks of the intake manifold, it is auto or gbox

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » June 27th, 2010, 10:50 pm

AUTO TIPTRONIC 6 SPEED

User avatar
black start
TriniTuner 24-7
Posts: 7974
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby black start » June 28th, 2010, 1:49 pm

TRD clive wrote:AUTO TIPTRONIC 6 SPEED


sweet....

User avatar
josh.dookie
Chronic TriniTuner
Posts: 657
Joined: September 19th, 2007, 12:52 pm
Location: missing the trueno wit the 3sgte
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby josh.dookie » July 2nd, 2010, 9:02 am

hope u had gotten tru with the valve lock for the 20v man, nice project, 6speed auto tranny? Remembed get a ride in the luxel a couple years ago and it was a sweet ride, 2zzpowered luxel is gonna be a beast man..! By now your project must be nearing completion.. Keep us posted..!

User avatar
legoRB
Riding on 16's
Posts: 1296
Joined: March 28th, 2009, 10:57 pm
Location: Seeking the ultimate kakeyoro.....

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby legoRB » July 3rd, 2010, 8:43 pm

Whats the average price on a 2zz front half ???
Where are they available ???

Feel free to PM...

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 3rd, 2010, 9:32 pm

FRONT HALF COMPLETE WITH HARNESS, BRAIN, SHIFTER FOR TIPTRONIC, STEERING WITH THE BUTTONS TO SHIFT UP OR DOWN, INSTRUMENT PANEL AND FRONT SUSPENSION GOES FOR ABOUT $15000 - $18000. YOU CAN LOOK IN THE BAMBOO (POYEA, SEENATH, D&D).
Last edited by TRD clive on July 6th, 2010, 7:45 am, edited 1 time in total.

User avatar
legoRB
Riding on 16's
Posts: 1296
Joined: March 28th, 2009, 10:57 pm
Location: Seeking the ultimate kakeyoro.....

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby legoRB » July 3rd, 2010, 9:48 pm

cool...thx

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 7th, 2010, 10:26 pm

ENGINE INSIDE, HARNESS WIRE INSTALLED, JUST FEW CHECKS TO BE MADE AND ITS TIME TO BOUNCE STARTER. ONE PROBLEM SO FAR WHEN PUTTING IN THE ENGINE, MOUNTS FROMM THE 2ZZ AND FROM THE 1ZZ HAD TO BE USED. IN A LATER POST I WILL POST WHICH MOUNT WENT WHERE WHEN MY MECHANIC GIVES ME THE INFO. SOON IT WILL BE ON THE ROAD.
Attachments
DSCN1091.jpg
DSCN1091.jpg (21.51 KiB) Viewed 11048 times

User avatar
AYE_SOLDIER
Shifting into 6th
Posts: 2027
Joined: April 5th, 2007, 2:41 pm
Location: "you cant fake fresh!"

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby AYE_SOLDIER » July 8th, 2010, 8:35 am

i hope u dont mind me asking but how much did the complete half cut cost u? :roll:

M_2NR
not Admin
Posts: 7247
Joined: December 18th, 2008, 9:46 pm

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby M_2NR » July 8th, 2010, 1:19 pm

AYE_SOLDIER wrote:i hope u dont mind me asking but how much did the complete half cut cost u? :roll:

TRD clive wrote:FRONT HALF COMPLETE WITH HARNESS, BRAIN, SHIFTER FOR TIPTRONIC, STEERING WITH THE BUTTONS TO SHIFT UP OR DOWN, INSTRUMENT PANEL AND FRONT SUSPENSION GOES FOR ABOUT $15000 - $18000. YOU CAN LOOK IN THE BAMBOO (POYEA, SEENATH, D&D).

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 11th, 2010, 8:06 pm

FINALLY PROJECT FINISHED AND THE CAR IS ON THE ROAD. MUFFLER TO REDO SINCE THE 2ZZ ENGINE COMES WITH A BIGGER BORE PIPE THAN THE 1ZZ.
PROBLEMS ENCOUNTER, IS JUST ONE ENGINE MOUNT HAD TO MOVE BACKWARDS, THAT WAS THE LEFT (TRANSMISSION) ONE. IT WAS A QUICK FIX, JUST HAD TO TAP THE HOLE AND WELD THE NUTS FOR THE BOLTS.
JUST TO NOTE THE FRONT AND BACK MOUNT WAS FROM THE 1ZZ AND THE LEFT AND RIGHT WAS FROM THE 2ZZ SINCE MY CHASSIS NO. WAS ZZE122 AND THE FRONT HALF WITH THE 2ZZ CHASSIS NO. WAS ZZE123.
FOR ANY ONE WHO IS DOING A CONVERSION, TO MAKE THE CONVERSION EASY BUY A FRONT HALF COMPLETE WITH MAJOR COMPONENTS SUCH AS ENGINE COMPLETE WITH HARNESS AND BRAIN AND ENGINE MOUNTS, SUSPENSION (NOT NECESSARY), INSTRUMENT PANEL AND WIRE HARNESS IN THE INSIDE (UNDER THE DASHBOARD).
Attachments
VSCN1118.jpg
VSCN1118.jpg (21.92 KiB) Viewed 11016 times
VSCN1116.jpg
VSCN1116.jpg (20.52 KiB) Viewed 11016 times
DSCN1114.jpg
DSCN1114.jpg (19.81 KiB) Viewed 11016 times

User avatar
eliteauto
TriniTuner 24-7
Posts: 14016
Joined: March 10th, 2006, 1:36 am
Location: Love is progress, hate is expensive
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby eliteauto » July 11th, 2010, 8:50 pm

good stuff, nice to see someone do a swap thread and come back with updates, congrats looking forward to hearing how this car performs

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 12th, 2010, 8:11 pm

LOOKING FOR SOME 15" RIMS 4 X 100 BOLT PATTERN.(GOOD CONDITION SMALL MONEY).
THIS IS FOR THE CAR SINCE I UPGRADED WITH BIGGER ROTAR AND CALIPER THE SMALLEST I CAN GO IS 15'S.

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 15th, 2010, 8:21 am

bumppppp

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby Big Z » July 15th, 2010, 8:37 am

You should make a post in the Car & Auto Parts Classified.
It will be much easier to get responses there.
Great job with the feedback too!

Image

User avatar
YelloRolla
Street 2NR
Posts: 43
Joined: April 24th, 2007, 6:28 pm
Location: SOUTH

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby YelloRolla » July 16th, 2010, 1:24 pm

you selling the 1zz transmission?if yes,what's the price?

User avatar
ramishrrr
3NE2NR is my LIFE
Posts: 893
Joined: September 17th, 2007, 6:21 am
Location: Marabella
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby ramishrrr » July 16th, 2010, 6:05 pm

Now, if only I could lay my hand on a speed-limiter defeat for the Auto-Transmissioned 2ZZGE........................................................sigh!!!!!!!!!!!!

User avatar
TRDcorolla
Riding on 18's
Posts: 1751
Joined: November 28th, 2007, 2:24 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRDcorolla » July 17th, 2010, 4:58 pm

ramishrrr wrote:Now, if only I could lay my hand on a speed-limiter defeat for the Auto-Transmissioned 2ZZGE........................................................sigh!!!!!!!!!!!!


http://www.hksusa.com/products/?id=781&rsku=5270

User avatar
TRDcorolla
Riding on 18's
Posts: 1751
Joined: November 28th, 2007, 2:24 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRDcorolla » July 17th, 2010, 5:00 pm

TRD clive wrote:AUTO TIPTRONIC 6 SPEED


is this tranny from a 1zz MRS ? ... as the 2zz iSHIFT (tiptronic) came 4spd....only 6speed tip i know of came in the mrs

User avatar
TRD clive
Ricer
Posts: 17
Joined: March 11th, 2010, 11:15 am

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby TRD clive » July 18th, 2010, 12:36 pm

SORRY MY MISTAKE FROM PREVIOUS FORUM . ITS A 2ZZ 4SPEED TIPTRONIC.

User avatar
Razkal
2NRholic
Posts: 4824
Joined: May 30th, 2004, 2:33 am
Location: Gone Fishing...
Contact:

Re: 1ZZ TO 2ZZ ENGINE SWAP

Postby Razkal » July 19th, 2010, 8:23 am

anyone have good, detailed spec sheets for the 4AGE (20V), 4AGZE and 2ZZGE?\

doing some research and can't seem to find more than power/torque/dispalacement figures...

a stock motor dyno sheet would be epic for either or all the aforementioned motors..

Advertisement

Return to “TOYOTA”

Who is online

Users browsing this forum: No registered users and 9 guests