Flow
Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

NZE Rotor compatibility imp question

It's all about 4AGE, NZE, 3SGTE, 1JZ, 2JZ etc.

Moderator: 3ne2nr Mods

User avatar
TRDev
Riding on 13's
Posts: 1
Joined: February 7th, 2011, 9:17 am

NZE Rotor compatibility imp question

Postby TRDev » February 7th, 2011, 9:22 am

Hey guys i have an NZE corolla and the rotors are worn..i have to replace them, my car is the 1nz, vvt-i 1.5 Singapore version. The parts are i am finding is japanese im not getting the singapore, can anyone tell me if there is a difference if the two are interchangeable.

Thanks guys

User avatar
Big Z
30 pounds of Boost
Posts: 2505
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: NZE Rotor compatibility imp question

Postby Big Z » February 7th, 2011, 10:57 am

While I cannot answer your question directly, I can provide the following info:

There are two rotors used (that I know of) on the ZE Corolla:
1. ~10 inch rotor
2. ~ 11 inch rotor

Only the US Corolla and the 2ZZ-GE Corolla comes with the 11 inch rotor. (I think)

So do yourself a favour and measure your rotor diameter and thickness, and compare it to the one that youre getting.

EDIT: 26-11-11

As can be seen below, the older ZE Corollas come with thinner rotors (same as the 1.6 AE111). I highly recommend upgrading to thicker rotors (preferably a quality pair of cross drilled and/or slotted) and associated calipers.

Engine / Chassis/ Year / Bolt holes / Diameter/ Height / Thickness [New/Min (mm)]
1.4 (ZZE111) 99-2002 4 255 48 22/20
1.4 (ZZE120) 2002-up 4 255 49 25/23
1.6 (ZZE112) 99-2002 4 255 48 22/20
1.6 (ZZE121) 2002-up 4 255 49 25/23
1.8 (ZZE123) 2002-06 4 275 49 25/23
Last edited by Big Z on November 26th, 2011, 11:52 pm, edited 2 times in total.

User avatar
Chemical
I LUV THIS PLACE
Posts: 1048
Joined: May 17th, 2007, 3:09 pm

Re: NZE Rotor compatibility imp question

Postby Chemical » February 7th, 2011, 12:35 pm

JDM's carry a bigger rotor (thickness) . Listen to Big Z however take your old rotor with you.

User avatar
Imran007
3NE 2NR for life
Posts: 108
Joined: April 4th, 2007, 7:52 am
Location: T&T

Re: NZE Rotor compatibility imp question

Postby Imran007 » February 10th, 2011, 2:16 pm

Japanese or Singapore it doesnt matter, it will work. i had the same changed in mine a few years ago. i got the original rotors machined as well and gave them to a pal and he had no complaints..

User avatar
Big Z
30 pounds of Boost
Posts: 2505
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: NZE Rotor compatibility imp question

Postby Big Z » November 26th, 2011, 11:46 pm

See updates above.

Advertisement

Return to “TOYOTA”

Who is online

Users browsing this forum: No registered users and 31 guests