Faiz has about four different versions of the coil pack none are OEM but they are from Japan it cost about 600-800 TTD

_________________
Vishnu is free of all flaw, and has an infinite number of good attributes.

mitsucrew

yuh seein dat... cant go wrong with quality car care
but i not going lower than 2" on these stock wheels... when i buy wheels, i'll slam!

_________________
The Spirit Of Competition...

^ whats the maintance like on a slammed car?

_________________

never wud trust dem chop shops like suspex, quality etc... they all go for form over function... and when they rebuild ur shocks with (bread van) shocks, its right there u have to go back and shell out $$$. besides, most if not all of these so called "professionally lowered" vehicles are made for 1 particular style of driving...Slow/Shining/Cruising... wud be great for men with moosic installs or crims.

i say true coilovers and done!!!




nice, looking to downgrade to a size 16 yr end but a 225-235/16/45-50 depending on lip roll. 747, whats ur suspension setup like and ride quality?

_________________
Lancer Parts 4 Sale
http://www.trinituner.com/v3/forums/viewtopic.php?f=6&t=470392&p=6647619#p6647619

Im using bilstein cradle bushings, ralliart white shocks and ralliart red spring(got only like half inch drop) but the handling is much better. I guess with a little stiffer shocks, wider tyres seem to work better by holding more road to corner hard. Im now watching it, the 215's on these evo 5 rims have it right on the fender line, so im guessing the 225's might stick out. EVO rims on the whole i believe are more out bcuz of the 4wd system if im not mistaken.

Wanna upgrade the other bushings later on and im still thinking if to polyurethane the mounts or just go back original for the front and back.

I still have to change some bushings in the back now, as well as put on 215's in the back as i get some money.

r u guy sure u can have yuh cake and eat it too

_________________
0-60 in ah month & 1/2

hey question does anyone know if the cs tiptronic shifter and the ck tiptronic has the same main jack

_________________
0-60 in ah month & 1/2

Fellas i'm looking for a set of fogs for the '06 model **the kind you getting in the firm now** somebody point me in a direction cause i don't want to order it

_________________
When life throws you lemons. Throw the back!!

_________________

Anyone know where i can get CS5W(Cedia Wagon) ball joints? As well as wheel bearings, need to get those ASAP.

^^^all CS model lancers use d same cradle so jus ask for CS lancer/cedia ball joints...most parts places should have it...make sure u get the three 555 brand

front bearing oem part number MR491449 dimensions: 80 mm (O.D) x 40 mm (Thickness) x 40mm (I.D)

for the rear bearing u have to buy the complete hub assembly MR527453

_________________
A few steps closer....

Still waiting on a response I want to get those fogs ASAP

_________________
When life throws you lemons. Throw the back!!

No. From the Evo V onwards, the tracks on the Evo models were increased for handling purposes, and not because of the AWD system.

_________________
I am an artist, the track is my canvas and the car is my brush - Graham Hill

Offset of the E5 rims probably making it out more. The other rims were inside more, since going 5 hole conversion with evo5 rims, its out a bit more. But looks aggressive

are you sure that those are really E5 rims...specs online says stock wheels are 17 x 8 with an offset of 38 because the E5 had rear fender flares and a flared out front fender...that would stick out the fender on a CS Lancer especially the front...

http://www.performancecar.co.nz/article ... v-pc-148-r

http://kereta.info/the-evolution-of-mit ... evolution/

I feel it's E4 rims you have because those came with 16's and didn't have flared out fenders

btw the part number for the 555 brand cradle ball joint for CS lancer is SB-7872

_________________
A few steps closer....

nah they came off an evo 5 shell. They stick out quite a bit, the front is actually pass the fender line.

Ordered the ball joints today, price down here is kinda ridiculous and im getting it cheap online so i might as well get the cheaper parts and change them every 6 months to keep the vehicle working like new all the time. ESPECIALLY with our roads and my routes, its a killer on suspension parts, stock mostly.

All i need is the wheel bearing, guess i will have to take it out and carry it by SKF and see what i can get.

_________________

the amt of time BELLA # post n he stil arsking...call de man. use d net and find out places in bamboo...CALLLLL!!!!!!

_________________
Lancer Parts 4 Sale
http://www.trinituner.com/v3/forums/viewtopic.php?f=6&t=470392&p=6647619#p6647619

682-7179

_________________

Bella is ah bad thing or sum? why everybody want or have he number so? LMAO!!!!

_________________
When life throws you lemons. Throw the back!!

^^You talking about the round fogs?

_________________
Mitsubishi Cars Drive The Future.

done get it now is to find a electrician to wire and i want the original switch ppl gimme a driection so i can get these sorted plz

_________________
When life throws you lemons. Throw the back!!

2 quick questions bout ac system

1. I opened the glove box , but my cs2 had no ad filter , so i buy one an put it in . The ad works normal but will this cause ne problems ??

2. When the car is in the sun for 2 or 3 hrs the ac doesn't kool even at full speed .... Its takes more than 15 mins to kool down ... Is this normal or do i need to gas it up??

^^^the earlier models didn't come with a filter but it's good that u installed one...u basically filtering d air that u would be breathing..

it depends on how dark of a tint you have on d windows...if you have no tint then the a/c won't really do much in hot sun.....if yours is dark and it isn't cooling properly then yea carry it by an a/c man and let him check d gas level

_________________
A few steps closer....

thanks ....

Ah have 35% on d car so that go explain it ...

Fog light switch part number this correct? MR190951

_________________
When life throws you lemons. Throw the back!!

^^^correct

_________________
A few steps closer....

Great now where can i get it locally because i ain't paying the amount i'm seeing it for online just like that

_________________
When life throws you lemons. Throw the back!!

hey trivia guys ........does the intank fuel pump that comes with the gdi cs2a has the same p.s.i as the non gdi cars........remember is the intank pump

_________________
0-60 in ah month & 1/2

Fellas service your ISC aka idle step up motor...Biggs where yuh...

viewtopic.php?f=33&t=458785

_________________