TriniTuner.com  |  Latest Event:  

Forums

4G15 DOHC ECU Pinout diagram

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

denszio
Riding on 13's
Posts: 10
Joined: September 13th, 2010, 8:17 pm

4G15 DOHC ECU Pinout diagram

Postby denszio » September 13th, 2010, 8:41 pm

Hi Guys,

I'm new here. I need help on my newly transplanted CK. I replaced my 4g13 Carb engine with a 4g15DOHC. My ECU Part number is MD331036. I hope you could help me out with the pinout diagram for this so I could tap wiring for my Main fan to work when the engine is going beyond normal operating temperature.

Thanks,
Dennis

User avatar
QuickPc's
3NE 2NR for life
Posts: 234
Joined: January 24th, 2008, 8:43 pm
Location: Waitin on u to SCAN Mitsubishi Tech...

Re: 4G15 DOHC ECU Pinout diagram

Postby QuickPc's » September 20th, 2010, 9:28 am

denszio wrote:Hi Guys,

I'm new here. I need help on my newly transplanted CK. I replaced my 4g13 Carb engine with a 4g15DOHC. My ECU Part number is MD331036. I hope you could help me out with the pinout diagram for this so I could tap wiring for my Main fan to work when the engine is going beyond normal operating temperature.

Thanks,
Dennis



gimmie a shout i'll handle dah for you is a real simple process...

~bess
744-3798

denszio
Riding on 13's
Posts: 10
Joined: September 13th, 2010, 8:17 pm

Re: 4G15 DOHC ECU Pinout diagram

Postby denszio » September 24th, 2010, 6:00 am

Sir, I tapped a wire from the ECU (pin#21, blue wire) to a new Bosch Relay. It started working and shut off automatically as well. Do I need to place a diode between the relay and the ECU so that there won't be any charge returning to the ECU? Sometimes the CHECK ENGINE comes out but everything is working fine (idling, temp, fans, aircon, etc) so i'm guessing this has something to do with the wire that I tapped into. Kindly share your inputs.

Thanks!

benjo_t
Riding on 13's
Posts: 5
Joined: July 26th, 2011, 7:50 am

Re: 4G15 DOHC ECU Pinout diagram

Postby benjo_t » August 22nd, 2011, 8:46 am

I am also interested in looking for a pin out diagram of the 4g15 dohc. Anybody has it?
Thanks

ashramparagsingh
Riding on 13's
Posts: 1
Joined: June 16th, 2011, 8:23 am

Re: 4G15 DOHC ECU Pinout diagram

Postby ashramparagsingh » September 23rd, 2011, 9:01 am

Hello out there, I own a Mitsubishi mirage with a fuel injection engine and ecu. I am encountering a hard starting problem. It usually takes about 10 tumbles before the engine starts. My mechanic suggests it may be the ecu. Anyone out there can advise or assist. Thanks in advance

Ashwin46
Riding on 13's
Posts: 4
Joined: November 2nd, 2011, 2:43 pm

Re: 4G15 DOHC ECU Pinout diagram

Postby Ashwin46 » November 2nd, 2011, 3:06 pm

Hello Guys, i have 4g15 dohc engine, i hv done basic modifications like direct airfliter, fuel regulator, Irridium s plugs, thick s plugs wires, big exhaust pipe 2", AND competition muffler, i would like to know where can i re map my ecu box based upon these modifications. thanks

xtonic
Riding on 13's
Posts: 1
Joined: September 2nd, 2014, 11:18 pm

Re: 4G15 DOHC ECU Pinout diagram

Postby xtonic » September 2nd, 2014, 11:30 pm

I would need the pinout as well for my 4g15 dohc, ecu part num: MD331036.

I am encountering delay with the idle up/servo when using the a/c. when I turn on the a/c the idle would fluctuate downward first before the idle becomes stable. When the a/c disengages, the idle would spike to 1.2-1.4 rpm before it becomes stable. It is more like a delay between the servo and a/c. I was not able to find the person who wired the engine before and other electricians wanted to redo all wirings wherein it is very costly.

thanks

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 12 guests