Moderator: 3ne2nr Mods
turbo_beast369 wrote:the sports edition and ralliart models that carry the GDI 93T use the tiptronic tranny and even has a different ECU because of that as opposed to a CVT transmission in the regular GDI 93T wagons
so I would assume it should be easier to fool the tiptronic ECU from the ralliart models
a padna I know had a ralliart wagon and he installed a gearbox and it ran normal, even with high boost (he eventually mashed up d engine and gearbox tho lol) I don't know what gearbox he used...
point is, it can be done...u just have to find the right electrician who knows how to do it...
EXODUS wrote:a WRX TD04 and manifold upgrade soundin like a plan for meh 93T CM5A... @ stock setting, wud i encounter any probs seeing that the stock PSI on a GSR is 7lbs?
RedHit wrote:The engine loom was cut; I have an working NA loom with metal ecu box, but It does not run like I would like it..^^
I have the original 4g93T GDI A/T ECU as well, but I am seeing no way of fitting it in.
There is also the way of using an evo 8 ECU and loom, have both at home. But the EVO 8 dont have 1000ccm injectors like the GDI have, and also dont use single ignition coils like the GDI does. Also the EGR system would not be usable.
If I would have the pinout for the Stock GDI Turbo ECU, that would be a big help (If it runs without its mated Gearbox ).
Or if somebody know the injection timing of the GDI, and is able to programm the evo 8 ECU a bit. I could use the single could ignition paired, as it was a doubled one like the evos have.. At least I hope so. Could solve the first problem.
RedHit wrote:The 4g93T GDI Ecu should be the MR578746, the EVO stock is the MR578746, and the N/A GDI Stock is the MD355869 (Metal Case) or (a bit work to do, but thats possible) MR420361 in plastic case.
RedHit wrote:I have imported an 4g93T GDI and use it together with an 5 gear manual transmission in my Mitsu Carisma. Problem is: I had to use the N/A loom and ECU, but the engine is running ways to lean with that setup.
Which different ecu could fit?
Users browsing this forum: No registered users and 11 guests