Page 1 of 3

Mazda Mechanic!!

Posted: June 20th, 2010, 9:16 pm
by art n motion
I'm looking for a good, reliable, reasonably priced, competent Mazda mechanic. 8-)
Anyone can recommend one :?:
Needed ASAP 8-)

Re: Mazda Mechanic!!

Posted: June 21st, 2010, 8:52 am
by MAZTUNE
still trying to figure out what car is this!!! what kind of 323/Familia you have??

Re: Mazda Mechanic!!

Posted: June 21st, 2010, 12:38 pm
by Wildcard26
Heard about some guys in Hermitage that only work on Mazda Familia/323 family (ie 323, Familia, Protege, Sport20, Zl/Zm engines) If it is that car I can see if I can get the info for you.

Re: Mazda Mechanic!!

Posted: June 21st, 2010, 10:07 pm
by allon4
That's my mom's model of car, can you get the information for me please? Looking for a new mechanic

Re: Mazda Mechanic!!

Posted: June 22nd, 2010, 7:53 am
by Spirit R
I am also looking for a mechanic for a Mazda 6

Re: Mazda Mechanic!!

Posted: June 23rd, 2010, 10:06 am
by MAZTUNE
very good buy art n motion

Re: Mazda Mechanic!!

Posted: June 24th, 2010, 9:11 am
by Wildcard26
The Mazda BJ mechanic is Nazim, ********. I don't know what other models he does work on but I am sure he does. From what I have heard most of the Sport20 guys do work by him.

Re: Mazda Mechanic!!

Posted: June 28th, 2010, 12:01 am
by art n motion
MAZTUNE wrote:very good buy art n motion

Thanx Khaleel!! :mrgreen:
Just need to do the basic upkeep!!

Thnax for the info Wildcard 8-)

Re: Mazda Mechanic!!

Posted: July 16th, 2010, 7:25 am
by MAZTUNE
hey art got that BOV piping for you, pass when you get a chance

Re: Mazda Mechanic!!

Posted: July 18th, 2010, 3:32 am
by art n motion
this week for sure 8-)

Re: Mazda Mechanic!!

Posted: July 18th, 2010, 3:33 pm
by MAZTUNE
no problem man just call me before you come.

Re: Mazda Mechanic!!

Posted: August 26th, 2010, 12:33 pm
by weapon X
i need to do over my mazda 626 engine if u can help me my number is 2966384

Re: Mazda Mechanic!!

Posted: October 2nd, 2010, 5:24 pm
by Groovemaster
You guys know any reasonable mechanic who works on Sundays?

Re: Mazda Mechanic!!

Posted: October 10th, 2010, 3:11 pm
by classywoodworks
can the tappets on a Mazda bj be adjusted ????? and am looking for a throttle body for the ZM engine can anyone assist (new or used )

Re: Mazda Mechanic!!

Posted: October 10th, 2010, 7:42 pm
by Wildcard26
Call Maztune and see if he can link you. If not BK or you can go Foreign Used.

Re: Mazda Mechanic!!

Posted: October 23rd, 2010, 10:40 pm
by Groovemaster
You guys know a good auto electrician who can install this kit for me? Preferably south. (Good clean, neat install)

Image
BTW it's a local 2007 Mazda 3

Re: Mazda Mechanic!!

Posted: November 28th, 2010, 12:26 pm
by TechMD
:popcorn:

Re: Mazda Mechanic!!

Posted: February 2nd, 2011, 7:24 pm
by dlion
FWL Trinidad
Corinth Road
Cocoyea

652 7440

Waz or Shyam

Mazda Specialists

Re: Mazda Mechanic!!

Posted: March 8th, 2011, 8:30 pm
by Cosmo Business
Wildcard26 wrote:The Mazda BJ mechanic is Nazim, ********. I don't know what other models he does work on but I am sure he does. From what I have heard most of the Sport20 guys do work by him.


Hey, do you have a phone no. for him ?
PM me
RR

Re: Mazda Mechanic!!

Posted: March 8th, 2011, 9:56 pm
by Wildcard26
I will get it for you and message it to you.

Re: Mazda Mechanic!!

Posted: August 3rd, 2011, 11:13 pm
by sureshsingh
the wire is already there for the fog lamp you might only need to use the switch if it does 'nt
come with the headlight switch ,the wire is already there for the switch .

Re: Mazda Mechanic!!

Posted: October 10th, 2011, 9:59 pm
by toiz29
sureshsingh wrote:the wire is already there for the fog lamp you might only need to use the switch if it does 'nt
come with the headlight switch ,the wire is already there for the switch .

Re: Mazda Mechanic!!

Posted: October 10th, 2011, 10:02 pm
by toiz29
After market fogs tend to get hot with the original wiring. A relay may be needed.

Re: Mazda Mechanic!!

Posted: October 17th, 2011, 10:59 am
by toiz29
I have a bj 2001 singapore, all the shocks were changed, the bearings were changed, engine mounts were changed, but there is a humming sound that sounds like bearings especially when going down an incline. What could be the cause of this?

Re: Mazda Mechanic!!

Posted: November 12th, 2011, 11:25 am
by krusty_007
Guys..

I'm a newbie...

And in serious need of a good Mazda mechanic.

I've got a 1994 323F 4 door sedan with a B5 engine. It's not starting at all. Broke down and towed the car at home. Two mechanics checked the car and got ignition from the distributor and fuel. The engine is cranking but not starting. None of these mechanics got a diagnostic scanner and the guys I tried to get to bring a scanner told me to bring the car to them!!!That sucks!!!
I depend on my car for work and it's down since Tuesday of this week.

In need of some real help fellas.
I would appreciate some good help here.

Thanks alot.

Re: Mazda Mechanic!!

Posted: December 8th, 2011, 7:52 pm
by toiz29
Looking for rear disc for my bj, tired of the drums.

Re: Mazda Mechanic!!

Posted: March 2nd, 2012, 7:50 am
by Wildcard26
Check out Maztune or Kevin Henry (Can't remember his Tuner nic).

Re: Mazda Mechanic!!

Posted: March 4th, 2012, 11:11 am
by xxgunsxx
hey , i have a Mazda bt50 pick up , most of the time when i attempt to start my engine , it takes lazy tumbles and then it starts , and the exhaust fumes looks white for about a minute afterwards then it regularises , also the engine idles a bit rough while the white smoke is puffing . i have also noticed that i have to top up my radiator coolant more often as well . whats wrong with it

Re: Mazda Mechanic!!

Posted: April 7th, 2012, 12:12 am
by KURMAman
seems there isnt a specific mazda mechanic u all cant recommend?

My bro have a new model mazda6 and is really disappointed with the firm's servicing. He's been looking around for a trustworth mazda mechanic in south..any help will be appreciated :)

Re: Mazda Mechanic!!

Posted: April 17th, 2012, 2:43 pm
by lazytrini
Hey guys, hoping someone can help. My driver's door in my M3 won't open. It just stopped randomly one morning and won't respond to alarm-remote or key. Two straighteners opened it up from the inside and gave up because the lock is encased in something they can't reach. A couple of alarm installers told me they couldn't help either. Anyone had this problem and/or can recommend someone who might be able to help with the problem? Thanks in advance.