Greetings all, I'm brand new to the Trini-Tuner family but I've been a quiet visitor for quite a while.

I'm the proud owner of a Mazda MX6 for coming on 8 years now, and also recently purchased a Civic SiR to be my daily driver as I was tired of not being able to allot the necessary time with the MX whenever I had mechanical issues.

So I'm just reaching out to any fellow MX6 owners so that we could share some knowledge and our ownership experiences.

Thank you!

SiRMX.

yep i have 2, a manual one from japan bought it down in 2004 , and a local pay model..the jspec one has the manual with the klze engine rear wheel steering , heated passenger mirrors digital climate control, its fast as hell.. the local its in mint condition as well, just a paint job it needs.. the interior is mint the shocks ebgine trany everything is great ..great cars never had major issues with them , i know these cars from inside out any problem just ask,,

Thanks brother! I was beginning to think that all the MX6 owners on TT had moved on. My car is not as mint as it used to be, I too could do with a paint job, and my driver's seat now has a hole in it due to the wear and tear. I bought the car from one of my best friends and he wasn't into speed but music, so he put a lot in it, sadly, due to age, one of the amps and head unit have blown too many times for me to bother again right now to bring that aspect back to its original glory!

I on the other hand really appreciate a fsat car, and even though I was told I was trying to make a race horse out of a donkey, I plodded along with some mods. The first thing I did was install an after market auxilliary transmission oil cooler, then I put in Pace Setter headers, had a custom built free flow 2 1/2 inch exhaust system installed, Eibach performance springs, EBC slotted and dimpled front rotors (no longer on), EBC solid rear rotors, K&N FIPK for the MX6, Arospeed Ground Wire Control Kit, and I also changed out most of the suspension to poly-urethane.

In retrospect though maybe I should of listened to my friend, because most of the time, it was only cut-arse ah was getting!

Since I bought the car, and after doing alot of research, I have been looking for a front cut to get my hands on a KLZE engine and transmission WITH the harness and ECU, but to no avail! Sadly, when I did find a KLZE, it was without the harness and ECU and the clowns selling it actually told me that my ECU would have worked well.

Zacks when you get a chance you must post a few pics, I would love to see them. I think the MX6 is and would always be a beautiful car! I just wish the models sold here weren't all show and no go!

so true..but to ease your mind these cars is not a donkey as ppl say..the problem is that we got the de tuned version from ss..using the kf engine a 2.0l engine.. the jspec came with the klze like mines it has the klze with the kl31ecu stamped on it rated at 200hp at the wheels..o and its manual too.. i race mines alot i have a centreforce stage 3 disc and pressure plate .. fuel reg cold air intake headers and more..let me tell u not even the turbo civic can keep up it runs like a devil ..

Some pics of my 6!

When I bought it in 2004, my good friend who owned it had put chrome fender arches on it which I eventually removed. (never cared for them). The paint is a bit faded now and the rims have lost some of their lustre! Not sure if they can be brought back to life.

A few of us would be meeting Sunday morning near north side and maybe a drive to Arima. Interested persons pm me.

_________________
THE DREAM IS DEAD®

you're not alone..... i have a '97 model with the KLZE 2.5 V6.... left hand drive fwd manual... now getting into some research also... not too sure if i wanna go full performance due to the availability (or lack there of) of parts

there they are

where locally can you source parts?
(other than aranguez)

Believe it or not, I still at times source parts through the dealership. On rarer occasions now though as their prices are ridiculously high! Aside from that, I have a few pardnahs who travel and on occasion I've burdened them with getting me a few items.

Right now I'm actually trying to see if I could have my four cradle arm bushings redone in polyurethane, as they're gone now and as a result the car can't be aligned (so no long runs for me!)

You can do a search on tuner for mx6, and see what you can find, as I seem to recall a few tuners mentioning some places where parts could be found.

Good luck brother and thanks for posting! Kris sorry but I only just saw your invitation, but as I was telling Brent, I'm trying to get the car in better shape before taking it on any long runs. Thanks for the invitation.

Cheers!

correct me if i'm wrong but local mx6 are pay and paz only, all came with automatic 2.0 v6 and all had fabric seats, 15" rims, fogs, moonroof, spoiler, mud guards, 14" 5-lug rims, 4-wheel disc brakes etc....did any come with dual airbags, abs, leather seats, cruise control and 2.5 v6?

_________________
2013 Audi A4 1.8TFSI Ambiente Plus

not all came only those series, it had pbl pbm i have a pbm jspec model came with rear wheel steering 4wdb 2.5l klze manual stock.. digital a/c 180mph tach fogs with indicators in them full front lights

Hey Zacxs, acesinghit was asking about locally sold MX6s. In that case, the majority were 2.0v6s and had fabric seats, 15 inch rims, ABS and 4-wheel disc brakes, sunroof, fog lights etc as you stated above. There were none with dual air-bags and cruise control as far as I know. However I was told that they're were three that did come with the 2.5 V6 engine, in fact I've seen two of them; a silver and a burgundy, (both PAY series). These cars didn't have leather either and what distinguished them externally, were GT stickers on the front fenders just after the doors, and a petal style rim. Those same rims and GT stickers were also on the GT 626 which was equipped with the 2.5V6, and leather seats. I hope this is helpful.

^^^indeed you both were helpful. What is the status of PAY 500 and PAY 501? I was told PAY 500 is infact the GT model which shares the same engine/transmission/rims as the 626 GT. So the GT 626/MX6 did come with ABS then? I know they came with leather seats but those are KL-DE not KL-ZE right?

_________________
2013 Audi A4 1.8TFSI Ambiente Plus

You're correct, PAY 500 was the silver I spoke about, it belonged to a gentleman named Tim Ali who is now deceased I believe, I think he sold the car, but haven't seen it around for a while. PAY 501 was and I think still is red, the last time I saw it it had the MAZDASPEED body kit on it complete with the rear wing and JDM headlights. The last time I saw that on the road was maybe over a year ago.

It should follow that the 626 GT came with ABS, but who knows with our car dealers, and yes, the engine would be the KL-DE and not KL-ZE which is highly sought after, in fact, I've been looking for one for years, complete with the ecu of course!

PAY 500 AFAIK came red (Bhagwansingh's) and PAY 501 came originally black (Pillai's) were the original owners???

_________________
2013 Audi A4 1.8TFSI Ambiente Plus

Oh yes, you're right! I was thinking of PAY 600, my bad. 600 was silver and owned by Mr. Ali.

PAZ ***

Looking great Capstar! A pity you're selling. Two years ago I reached a low point with mine and I put her up for sale, I decided to keep her however after I kept getting low-balled and strung along by promised buyers. I'm on a second wind now however and am trying to source some suspension parts and other bits to bring her back up to how I would like. I noticed what looks like a JDM pr North American Market rear bumper on the car, have you done a lot of work on the car? How's she running?

My car is in excellent working condition(original)...I buy most of my parts at the firm...this year i did shocks/mounts/seals/gaskets/fluids/bearings/belts/plugs/rotors/pads and many more..... spent $10K> but its a great car...
I am migrating in a few weeks hence the reason its up for sale.

Good luck with yours!

Thanks brother! I must say your car is really looking good! Right now I'm trying to source the cradle arm bushings, but first I'm checking to see if they can be done in polyurethane. Also going to change the left rear shock mount and rear shocks as well as re-do my engine mounts in poly as well! Fed up pay through the nose for the parts locally, and importing them is a pain as many times I find that they don't understand what you want or have the correct item. How much are you looking for by the way?

I forgot to mention..REPUAUTO(653-5896) in Marabella also sells parts for these cars

Thanks Capstar! I have to tell you good luck with the sale, and your new life off of these shores! If I had the cash, I would have certainly taken it off your hands. I've goten knocked down many times over the years with mine, having to deal with shit-hound mechanics and the unavailability of parts. However, when ever my friends start to pound me about minding 'old car' et cetera, I take comfort in the fact that for the money, there is still nothing that looks like it on the road today and if I wanted a new sports car or GT, it's hundreds of thousands of dollars you have to pelt out! So, bit by bit, I will bring my 6 back!

well my friend, a youth was looking for his first car and asked me what to buy, I recommended capstar's car since all the guy knows about is primeras, a31's and box lancers(the car culture of backward central). He told me capstar's might be sold, and he is really interested in the mx6 the more he sees it. Any of you guys know of any other well maintained mx6's for sale?

Hello. Yes, on www.trinicarsforsale.com there are three, including capstar's own. One of them was also up on Tuner for sale, a two-tone one with 20 inch rims. So let him start there. Hope he has cash though, yuh know how these banks move!

Thanks...and trust me i know...the amount of jokers called me however the first person that saw it bought it...i would not recommend you or any1 sell your MX6 for pennies....lots of people dont know how much these cars cost when they came out & like i said i only sold mine because i am migrating. Parts are available locally plus in the USA & UK have lots of parts ,from carbon fibre bonnets to performance parts! My uncle who is a car dealer in the USA told me he can get an MX6 in top condition there for $1500-$2000USD so again parts should not be an issue......Best of luck to all MX6 owners

those cars on trinicarsforsale, aside from capstar's one look poorly maintained, so I really cant recommend them to him. Parts importation is no biggie, i import most parts for my 323 as is, and i save money over buying parts locally.I can get new parts landed for the cost of used parts in the bamboo.

This is mine for the moment and im sure this does not look poorly maintained.......but you must have another car so it wont get beat up too much.

_________________
THE DREAM IS DEAD®

i wouldnt buy somn like that, nor would i recommend it...big rims=transmission strain. local paintjob, stickers everywhere...

Well I learnt something new, 3 stickers and $10,000 rims devalue a car. I wasn't aware that the rims were welded to the chasis- and that they couldn't change. The carbon fiber look is paint not stickers.

_________________
THE DREAM IS DEAD®