TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
Strugglerzinc wrote:Rear Engine Mount - approx $325 RBI
CV Joints - Have not changed these
Wheel Bearings - Front $400 for both some time back NTN
Call this guy Reputable Auto, he's knowledgeable and will give you up to date pricing 6360849
If you want OE Mazda then be prepared to pay out the nostrils at SS.
As far as i am aware, these things go bad through normal wear. There's no preventative maintenance to stop a bearing going bad. Make sure the CV boots are on properly and there's the correct grease in there.
As for the touching do you know what offset rims you running? 205/45/17 should be quite comfortable with the proper offset rims.
cinco wrote:heavy wheels and bad alignment cause bearing failure
the touching in the rear is inevitable if you have all that extra weight and on 17s more than likely it is rubbing on the inner part of the rear fender
the cv joints can be had about any parts place have heard good things about GLO brand and 555
Users browsing this forum: No registered users and 11 guests