frontier smoking in the morning for a few minuites white ,after a short distance driving smoking stops any suggestions,oh! check light sensor keeps coming on for about 3 months now .help needed

White smoke is an indication of either water in the fuel system (which comes out as steam after combustion) or could be incomplete carbon combustion (eg. rich fuel mix, or not enough air).

Try the basics first:
- drain the sedimentor (that's the fuel filter with the primer-pump on it)
- use a diesel cleaner additive like Redline or Amsoil or Liquid Moly in the tank to clean out the fuel lines from sludge (eg. use a bottle of liquid Moly per tank for 2-consective fill-ups)
- Check your air-filter, blow it out or wash it if it's a K&N
- Check your MAF sensor in your air-filter box, it might be dirty and sending wrong-signals to the ECU... buy a proper MAF sensor cleaner (try not to use alcohol and gasoline, the MAF sensor is VERY delicate). DOn't over-oil your K&N, sometimes the excess oil can foul the MAF sensor


Is the vehicle hard-starting? Does the glow-plug light stay on extra long?

_________________
Check out reviews of Trinidad's pickups - click here to read @ >>>>> Trini Truck Blog.

Side B: Keep On Truckin' !

If water is getting into the combustion system, there are two possible sources:
1. water in the fuel
2. cracked cylinder head.


Check your radiator water levels often and see if there's any change.

_________________
Check out reviews of Trinidad's pickups - click here to read @ >>>>> Trini Truck Blog.

Side B: Keep On Truckin' !

thanks dude ,did all that and found out it was the turbo ,needs to repair or replace any options