Postby SkettellGod » June 13th, 2014, 1:21 am
Good day tuners,
I have a 4x4 MT navara.
I installed a boost gauge on it (no reason to, just had one lying around and decided to use it)
What I've realized is that sometimes the van works on the stock 20lbs boost, at other times the boost goes to 38lbs on hard acceleration and stays there until I back off the accelerator.
I've done a diagnostic on it and a faulty boost solenoid came up. I changed the solenoid and cleared the error code, but same thing.
Any idea as to why the boost is "running away"
What can be done to keep things as it was designed to work?
Your help is appreciated