2Pc LCA Vs 1Pc LCA?

Da panty christ · Postby **Da panty christ** » October 19th, 2014, 4:05 pm

Good day fellow tuners would like to know can I replace my (1) one piece front lower control arm with a (2) two piece lower control arm shown in the pic (99-00 HONDA CIVIC)? would the interchange fit up exactly or modifications have to be made? :mrgreen:

red_dragon · Postby **red_dragon** » October 20th, 2014, 7:22 am

If you have physical access to both measure to confirm the geometry is the same

In additional you will have to change the sway bar links. The lower mounting is different.

from

to

Da panty christ · Postby **Da panty christ** » October 20th, 2014, 10:42 pm

red_dragon wrote:If you have physical access to both measure to confirm the geometry is the same

In additional you will have to change the sway bar links. The lower mounting is different.

from

to

thank you info much appreciated going bamboo hopefully this week to check up the geometry of the both control arms...will do some more research on the sway bar link :mrgreen: