Heads Up for a Safer Journey


We tend to call them headrests, but they have a proper title: head restraints.

And they have an important, if unglamorous, safety role – they protect the driver, and the passengers from a potentially nasty injury.

The problem with calling them headrests is that it makes them sound like some sort of comfort zone for drivers.

During the last 40 years a lot of work has been done to improve passive safety features in the car, from crumple zones to air bags. And if used properly, head restraints can be an important addition.

But there’s the rub: quite often they are ignored. In a recent survey just six per cent of drivers were found to check their head restraint before beginning their journey, or demonstrate that they knew the correct position.

We should take a moment before each journey to check that the top of the head restraint is level with the top of your head. Too high is as bad as too low.

Encourage your passengers to do likewise. A correctly-positioned head restraint may save you, and them, nasty injuries.

In the UK the single most common crash is the rear collision. Many rear impact accidents result in a neck or spinal injury. The head restraint plays a key role in protecting you from injuries, particularly whiplash.

You also need to remember that head restraints can impair vision to the rear, and so should make sure when manoeuvring and reversing that they are not obstructing you.

Not all head restraints are adjustable, but where they are, take care to ensure that they are placed high enough to stop the neck going backwards in the event of a collision. The head restraint should be level with the top of the head for maximum safety. Remember, it is there for your safety, not to help you nod off at the wheel!



info sourced from Institute of Advanced Motorist.

Belt up in the Back


Plans to introduce mandatory child seats this year linked to the age of the children have served to remind us how important it is that children have the appropriate restraint.

Check that your car seat has been installed according to the manufacturer’s instructions

Then, each time the child is strapped in, check again that the seat belt securing the seat is still fastened and hasn’t been accidentally tampered with.

A comfortable child is more likely to enjoy the trip, so it is worth checking that the shoulder belt of the seat should lie across the middle of the chest and shoulder, not the neck or throat.

Never tuck the shoulder belt under the children’s arm or behind their back. Where you have a lap belt fitted, it should be low and snug across the thighs, not the stomach. Also try to ensure that your child is small enough to sit against the seat back with the legs bent at the knees and feet hanging down; they should be able to stay in this position comfortably throughout the trip.

Consider using a booster seat where appropriate. Small babies should be placed in an appropriate size baby seat beginning with the first ride home from the hospital. Due to the risk of serious injuries, or even death, it is essential that the rear facing car safety seat is never used in the front seat of a car that has a passenger airbag. Generally the safest place for a child to be is in the back seat.

Children should never be left alone in a car, whether they are in their car safety seats or not.

Temperatures can reach deadly levels in minutes and children have died of heat stroke while locked in the car.

Child locks on the rear doors are a good idea when the children are young and provide you with additional reassurance.



info sourced from Institute of Advanced Motorist.

A Turn for the Worst

Have you ever found yourself braking in a bend simply because it was sharper than you originally thought? If you have then you should consider how you actually go about assessing the severity of bends, because if you get it wrong, the consequences are potentially serious.

It is not just novice drivers who get caught out on the bends though in the jargon, it is here that most single vehicle accidents take place.

There are a number of clues we can take from the environment to help us. The most obvious are the road signs and markings, but there are other less obvious ones: the line of the trees, hedges, buildings, street lights or telegraph poles (although remember that sometimes telegraph poles run through fields, so dont follow them!).

The actual width of the road can be a factor because the narrower it is, the less space you have to manoeuvre. Skid marks on the road are an indication of past mistakes. The position and speed of other traffic can also provide you with valuable information. Another particularly useful way of assessing a bend is to use the limit point analysis.

The limit point is the furthest point which you can see, i.e. where the left and right hand sides of the road meet. To use this technique simply ask yourself is it getting further away? If it is and you can see further ahead, then your speed should be fine. On the other hand if it is getting closer, then you could continue to reduce speed until the limit point begins to move with you and your view opens up again.

This technique takes a bit of practice but it will help you to link your speed with your range of vision and allow you to stop in the distance seen to be clear.




info sourced from Institute of Advanced Motorist.

Don't take on that Tailgater


Drivers who “tailgateâ€

How not to Skid


If you are still scraping ice from your windscreen in the morning, the potential danger of ice on the road remains. Ice makes driving particularly hazardous and many drivers are still caught out at this time of year because they fail to “read the roadâ€

Under Pressure, Don't forget Your Tyres


We all know that tyres are among the most unfashionable items on the car. But that doesn’t mean that we should ignore them.

We do so at our peril. Those few square inches of rubber that keep us in contact with the road may only be the size of a credit card. But rain or shine, that is all that comes between the car and the tarmac.

There’s an old saying: the brakes stop the wheels, but the tyres stop the car. It stands to reason that they can’t do that job properly if you ignore them. Yet a recent survey showed that is precisely what we do: seven per cent of motorists admit that they only check their tyre pressures and the tread depth once a year.*

Under-inflated tyres wear far more quickly than they should. Tyre technology means that they are far better engineered than they need be. But that also means that they are expensive things to replace and why run the risk of a blowout in the meantime?

Industry experts claim that a twenty per cent reduction in pressure can shorten a tyres useful life by up to 30 per cent. Tyre waste is a major environmental headache. And checking that the pressure is correct for the car (including the loading) can also make a considerable impact on your fuel bill over the course of the year. The extra drag of neglected tyres will mean that each fuel tank is three per cent less efficient. That wasted fuel means more CO2 in the atmosphere

Don’t be tempted to add a few pounds per square inch. Over inflated tyres can cause poor vehicle handling, reduced stability in braking, cornering and reduced grip.

The IAM recommends that you check your tyres for wear, damage and pressure at least once a month. If you pick up a nail, or damage the sidewall on a pothole or a kerb, you may be able to save the tyre before it’s ruined.



info sourced from Institute of Advanced Motorist.

When Backwards is Best


In a car park, do you reverse into a parking space and drive out, or drive in and reverse out? The next time you are in a car park, have a look around and see how many people reverse into the space. You will probably find that most people actually drive in and reverse out. There is no doubt this may be safer/more convenient if the spaces are angled, when you have to load/unload items from the boot or if it would cause inconvenience to other road users.

On the other hand, reversing into the space provides you with several advantages. The first of these is that it is safer to reverse into somewhere you can see into (the parking space), rather than reverse out, into somewhere you can’t (the line of moving traffic). Many people find that it takes them a few minutes to settle into “driving modeâ€

Heads Up For A Safer Journey


We tend to call them headrests, but they have a proper title: head restraints.

And they have an important, if unglamorous, safety role – they protect the driver, and the passengers from a potentially nasty injury.

The problem with calling them headrests is that it makes them sound like some sort of comfort zone for drivers.

During the last 40 years a lot of work has been done to improve passive safety features in the car, from crumple zones to air bags. And if used properly, head restraints can be an important addition.

But there’s the rub: quite often they are ignored. In a recent survey just six per cent of drivers were found to check their head restraint before beginning their journey, or demonstrate that they knew the correct position.

We should take a moment before each journey to check that the top of the head restraint is level with the top of your head. Too high is as bad as too low.

Encourage your passengers to do likewise. A correctly-positioned head restraint may save you, and them, nasty injuries.

In the UK the single most common crash is the rear collision. Many rear impact accidents result in a neck or spinal injury. The head restraint plays a key role in protecting you from injuries, particularly whiplash.

You also need to remember that head restraints can impair vision to the rear, and so should make sure when manoeuvring and reversing that they are not obstructing you.

Not all head restraints are adjustable, but where they are, take care to ensure that they are placed high enough to stop the neck going backwards in the event of a collision. The head restraint should be level with the top of the head for maximum safety. Remember, it is there for your safety, not to help you nod off at the wheel!


info sourced from Institute of Advanced Motorist.

Proper Driving Position


If you think proper driving position means having your hands positioned at "10 and 2 o'clock" on the steering wheel (as they taught you in driver's-education class), get with the times! You see, automobiles have changed considerably in the past few years... and therefore, so should your driving habits. Relax - the changes are minor, and they can actually increase your driving safety and comfort, which will come in handy on those long road trips.

Nowadays you should:

Sit slightly reclined with your shoulders comfortably back in the seat. Sit as far back from the steering wheel as possible while still remaining in safe control of the vehicle.

The 10-2 position is the traditional favorite because, in theory, a higher grip allows a driver to keep the car running smoothly without needing to jerk the wheel suddenly if he is cut off or there is a hazard in the road.
But air bags are changing that equation. During a collision, the bag will explode out at more than 100 mph, protecting the driver's head and chest from slamming into the front of the vehicle. With the hands at 10-2 or higher on the wheel, a driver's arms can get walloped or thrown back into his face if an air bag deploys.

Hold the outside rim of the steering wheel at "9 and 3 o'clock" or slightly lower. This position will minimize the risk of injury to your arms, hands and fingers in case your airbag deploys. Your arms should be bent slightly.

In recent years, another new position has gained considerable popularity. "Mostly, the left or right hand up on the wheel and the other hand on a cell phone."

Be able to pivot your right foot from the accelerator to the brake pedal without lifting your heel from the floor.



Taken from Smart Motorist.com

Adjusting Your Mirrors Correctly


Don't assume that modern car door mirrors adjust themselves or you could be putting your life and others at risk. You need to adjust all three of your rear view mirrors so that you get the widest view possible while keeping your blind spots to a minimum. This is particularly important on multi-lane highways where you may have to keep tabs on lanes on both sides. Many drivers do not turn their outside mirrors out far enough and simply duplicate the same scene in all three mirrors. Rule of thumb: If you can see even a glimpse of the sides of your car in your outside mirrors they are turned too far inwards.

Before you drive away - After entering your vehicle, the very next thing on your agenda should be adjusting your seat and steering wheel, fastening your safety belt, and adjusting all three of your rearview mirrors.

Get comfortable - Adjust your seat so that you are high enough to see the road, yet can still reach all of the vehicle's controls. Many newer vehicles feature tilt and telescoping steering columns to help you get more comfortable. Some new Ford Motor Company products (Ford, Mercury, and Jaguar) offer electrically adjustable foot pedals that allow short, medium, and tall drivers a comfortable driving experience. If you don't have adjustable seats, and are still sitting too low, you should use a seat cushion, or better yet, have your mechanic raise your seat permanently. Do this before putting on your safety belt.

Interior rearview mirror - The positioning for the inside rearview mirror is fairly obvious, you should be able to see out of the rear window from the driver's seat. Be sure the day/night switch found on most rearview mirrors is in the day position during daytime operation. The night setting reduces the headlight glare from cars behind you and helps you see better.

Auto-dimming rearview mirrors - If you drive at night, you've undoubtedly experienced it - annoying and often dangerous glare from the headlamps of vehicles traveling behind you. While normal rearview mirrors are equipped with a day-night switch, automatic dimming mirrors darken to reduce glare from the headlamps of vehicles approaching from the rear. The brighter the glare, the darker the mirrors become, making nighttime driving safer. About 10% of vehicle's sold in the US are currently equipped with this valuable safety feature. Usually auto-dimming mirrors can't be ordered separately and are only available as part of expensive luxury group packages.

Be aware of the SUV glare - In addition to other hazards posed by sport utility vehicles (SUVs) and trucks, their headlights are usually mounted at the same height as most normal car's rearview mirrors. When an SUV travels behind a car, the glare from its headlights is reflected off these mirrors directly into the driver's eyes. Dr. Alan Lewis, president of the New England College of Optometry, has done extensive research on the effects of glare. He found that during nighttime driving, headlight glare from vehicles traveling behind you can temporarily blind you, increasing your reaction time by up to 1.4 seconds, even after the source of the glare is removed. The time it takes to stop your vehicle, or to avoid someone in the oncoming lane, is doubled if you succumb to temporary glare blindness.

Exterior rearview mirrors - As for the side view mirror or mirrors, most people adjust them so they can see the side of the car on the inside edge of the mirror. If you adjust your mirrors using that criteria, are you aware of the huge blind spots that you've created? (Now is the time to take another look at the animated diagram at the top of the page.) Consider the view when the side view mirrors are set up as just described. Essentially, you have created "tunnel vision" to the rear. Your side view mirrors overlap much of what your inside rearview mirrors sees and you've also created blind spots.

What in the solution to tunnel vision and blind spots? Simply adjust the side view mirrors just beyond the point where you could see the side of the car on the inside edge of the mirror. With this setup, you almost completely solve the blind spot problem. It takes a little while to get used to, but it is an improvement. Some quick tips: For the driver's side mirror: Place the side of your head against the window, then adjust the mirror until the side of your vehicle comes into view. For the passenger's side mirror: While sitting in the driver's seat, lean to the right so that your head is in the car's centerline. Adjust the mirror until the side of your vehicle comes into view.

You are now ready to begin your journey safe in the knowledge that you won't have an accident while trying to adjust them while you're driving.

Backing up - Most of us don't think twice about backing our vehicles out of a parking spot or driveway. We should, thousands of children are killed or seriously injured every year by inconsiderate drivers who "just didn't see" them. A quick walk around your vehicle before getting in and backing up is an easy way to help prevent a catastrophe. Even after a walk-around, double check all three of your mirrors before you put your vehicle in reverse. Be extra cautious in inclement weather, don't think it can't happen to you!

Using your mirrors on the road - Most drivers rely on their rear view mirrors for two things, backing up, and changing lanes on the highway. Not checking your blind spots - those areas just outside the field of vision - can have disastrous effects when merging onto the highway or changing lanes.

One of the ways you can protect yourself is to make sure your vehicle's side and rearview mirrors are positioned for maximum road view. If all three of your mirrors are aligned correctly you should be able to see a vehicle leaving your rearview mirror seamlessly transfer to one of your side view mirrors without any delay. Vehicles present that aren't visible in your mirrors are the ones you need to worry about. Drivers with good peripheral vision will see them when they check their side view mirrors.

However if you rely solely on your interior rearview mirror, you're asking for trouble. Thousands of accidents occur each year because people changing lanes fail to see a vehicle that is right next to them. Diligent use of all three of your rearview mirrors should prevent you from getting in another driver's way or cutting them off. A good guideline for deciding when to move into the passing lane or back into the traveling lane is to make sure that you can see the headlights of the vehicle you're passing in the rearview mirror.


Taken from Smart Motorist.com

FLOODS: Advice for drivers


Advice for motorists considering driving in flood conditions:

1. Don’t go in if it’s obviously too deep: consider an alternative route

2. If you have to drive through water try to drive in the highest section of the road and don’t set off if a vehicle is travelling in the opposite direction. Leave time and space for each other, so you don’t swamp someone else.

3. Drive only fast enough to create a small bow wave in front of the vehicle - driving at speed may be dangerous to other vehicles or pedestrians.

4. Keep going once you have started - make sure you have a clear run, put the car into first gear, keep the rev’s high and set off. Don’t go in if you can’t see a way out on the other side.

5. Under no circumstances take your foot even slightly off the accelerator, as this will allow water to travel up the exhaust pipe. As you go through the water, slip the clutch if you can. After you come out, dry brakes gently before you need them - the best way is to lightly apply the brake as you drive along for a few seconds. This is particularly important if your car has drum brakes.

At the other side, keep moving, continue to rev the engine to clear any water from the exhaust.



Taken from the I.A.M

Watch your heels at the wheel


News that women are risking losing control of the car because they are wearing high-heeled shoes while driving may seem far fetched, but a survey by Sheila’s Wheels, the insurer, has backed it up.

Apparently 65 per cent of women want “better guidelinesâ€

Stay sharp on bends



Have you ever found yourself braking in a bend simply because it was sharper than you originally thought? If you have then you should consider how you actually go about assessing the severity of bends, because if you get it wrong, the consequences are potentially serious.

It is not just novice drivers who get caught out on the bends though in the jargon, it is here that most "single vehicle accidents" take place.

There are a number of clues we can take from the environment to help us. The most obvious are the road signs and markings, but there are other less obvious ones: the line of the trees, hedges, buildings, street lights or telegraph poles (although remember that sometimes telegraph poles run through fields, so don’t follow them!).

The actual width of the road can be a factor because the narrower it is, the less space you have to manoeuvre. Skid marks on the road are an indication of past mistakes. The position and speed of other traffic can also provide you with valuable information. Another particularly useful way of assessing a bend is to use the limit point analysis. The limit point is the furthest point which you can see, i.e. where the left and right hand sides of the road meet.

To use this technique simply ask yourself is it getting further away? If it is and you can see further ahead, then your speed should be fine. On the other hand if it is getting closer, then you could continue to reduce speed until the limit point begins to move with you and your view opens up again.

This technique takes a bit of practice but it will help you to link your speed with your range of vision and allow you to stop in the distance seen to be clear.



Taken from the I.A.M

Car Rental Success


Driving a rented car can be just as easy and safe as driving your own automobile—with the right preparation. How can you be sure that you're properly prepared each time you drive a rental? Here are some National Safety Council suggestions that can help to put you on the road to car rental success, especially where your safety is concerned.

Getting to Know You

- Don't rent a vehicle larger than you are physically capable of controlling.

- Spend a few minutes getting acquainted with your rental car.

- Take a look at the dashboard. Note the location of the speedometer, the temperature gauge, the gas gauge and so on.

- Locate the air conditioner, heater, windshield wiper and washer, defroster, and light switches. Turn them on and off to make sure that you know how they work.

- Test the brakes—with the engine running—to get the "feel" of them. Some brakes are "softer" than others, and you don't want to discover this when you're stopping for the first red light. At the same time, get the "feel of the wheel" by testing the "play" in the steering wheel. And make sure the hand brake works.


Check It Out

It's a good idea to inspect the rented car to make sure that everything's in working order.

- Be sure the tires are properly inflated. Underinflated or overinflated tires can greatly affect your safety, especially at high speeds.

- Check the headlights. Know where the switch is even if you'll only be driving during daylight hours—you might suddenly find yourself driving through a tunnel or facing a weather front in which you would want to turn on your lights. Do the lights work on bright and dim?

- Test the turn signals, windshield wipers and horn for any operating problems.

- Inspect the contents of the trunk. It should have a spare tire and a jack in it. Inquire about the availability of an emergency road kit if you're interested in extra protection, or provide your own.

- If you need special equipment, such as chains for driving on ice or child restraint seats, be sure to ask for it before you leave the rental lot.

- Check for any scratches or dents and report them to the rental agency before you leave the premises. Although these will probably not affect the car's performance, you do not want to be held responsible for them when you return the automobile.


Some Things are "More Different" Than Others

The differences between the rented car and the car you own may be more significant than simply the layout of the dashboard or the positioning of the gear shift. Following are some examples.

A Stick-y situation

If you're used to driving an automatic and the rented car is a stick shift—or vice-versa, it's important to reacquaint yourself with handling the new transmission before you begin driving.

More power to you!

Power steering and power brakes require a light touch. If you're not used to driving with them, you may want to get a "feel" for them before moving into heavy traffic.

Sizing things up

You may be used to a big car and the extra power that it affords you. Or, you may be used to squeezing your little compact into the smallest of parking spaces. In any case, if your rental car is significantly larger or smaller than the car you usually drive, be aware of its limitations.

Another alternative

If you're concerned about the differences between the car you rent and the car you own, you might want to request a rental that is similar to the make and model of your own automobile. Most rental agencies will be happy to oblige if they carry that model.


A Few Minor Adjustments, Please

Now it's time to customize the rented car to your personal driving habits.

Position the driver's seat so that you feel comfortable and at ease behind the wheel. Be sure you are seated at least 10"-12" from the steering wheel to allow airbags to inflate if necessary.

Be sure the headrest is level with the top of your ears.
Adjust the rearview and sideview mirrors so that they're in the right positions for you.


Getting the Hang of It

Take the rented car for a simple trial run, especially before you head for the freeways or a crowded downtown area. You may be more comfortable if you drive across the parking lot once or twice, or around the block, to become even more familiar with it. If you've got any questions, or if the car isn't performing up to par, go back to the rental agency immediately.


In Case of Emergency

Be prepared to deal with a crash or other emergency situation while on the road.

Review your insurance options with the clerk when you sign out the car. Know what your personal insurance will cover, and use that information to determine what additional coverage, if any, you may need to purchase.
Be aware of the rental agency's emergency road service provisions.

If they have no specific road service available, inquire as to whom you can contact in the event of an overheated engine, a tire blowout, or similar emergency situations. A good company will give you an information sheet with an 800 number to call in an emergency.


Taken from the National Safety Council.

The True Meaning of Green


Next time you are approaching a junction with traffic lights, ask yourself what a green light means.

If your answer is "go", you are only half right!

For full marks, you need to remind yourself that a green light at the junction does indeed mean go, but only if it is safe to do so.

Then ask yourself how long has it been green and what colour will it go to next? The longer it has been green, the sooner it will change. And there is only one colour next: amber. And amber doesn’t mean "speed up to get across the lights before they change". It means stop. And amber only goes to red next.

These days, especially with congestion the way it is, we see more and more drivers prepared to risk an amber light (we used to call them "amber gamblers") or even a red light to get across a junction.

That in turn means that we need an extra "defensive driving" technique to use. Even though the lights are "with you", always glance both ways as you approach the junction, to satisfy yourself that you can get across in safety.

By taking a moment to look both ways, even when your light is green, you might be able to spot early somebody who is prepared to risk their safety – and yours – by ignoring the traffic signals.

Even if the light is green in your favour, keep using your rear mirror as well.

It may be that you have somebody following you too closely. In which case, you spotting the that the green light is about to be amber in good time means that you will be able to slow down early, brake more gently and so reduce the chances of a rear-end shunt.


Taken from the I.A.M.

Reading the Road Ahead


A good, safe drive is about a mixture of techniques, but high on the list must be the need to use your car's brakes in a smooth and progressive way.

To do so you need to develop observation and anticipation, so that you begin your braking at an early stage and always leave a decent margin for braking more heavily if the need arises.

Many drivers tend to brake too late and too hard. Or arguably less dangerous, but equally annoying, some drivers have the habit of "comfort braking " - touching the brakes to enable themselves feel better, even if they have no intention of slowing the car to any measurable degree. They do so in the belief that they are being careful drivers.

It is better by far to learn to read the road ahead. Not only do you get early warning of developing hazards, you can respond by adjusting your speed using only your throttle.

Have you ever seen a "cascade" of brake lights ahead of you? An advanced driver will judge the speed and distances involved and, having left a decent gap, be able to follow in safety by letting the speed "fall away" and so avoiding the need to brake.

Think too about your positioning on the road - can you maximise your forward view by putting the vehicle in a slightly different position on the carriageway?

This should not be an abrupt repositioning, but a smooth change in your line to enable you to see ahead that little bit better. Careful adjustment of road position improves the view ahead, particularly through corners.


Taken from the I.A.M.

Their life in your hands: Kids in cars


Parents with small children in the car are used to a degree of distraction and by and large cope.

A comfortable child is more likely to enjoy the trip, and less likely to disrupt it, distracting the driver.

So before setting off, check that the shoulder belt is across the middle of the chest and shoulder, not the neck or throat.

Then, each time the child is strapped in, check again that the seat belt securing the seat is still fastened and hasn’t been accidentally tampered with.

Never tuck the shoulder belt under the children’s arm or behind their back. Where you have a lap belt fitted, it should be low and snug across the thighs, not the stomach. Also try to ensure that your child is small enough to sit against the seat back with the legs bent at the knees and feet hanging down; they should be able to stay in this position comfortably throughout the trip.

Small babies should be placed in an appropriate size baby seat beginning with the first ride home from the hospital. Due to the risk of serious injuries, or even death, it is essential that the rear facing car safety seat is never used in the front seat of a car that has a passenger airbag.

Generally the safest place for a child to be is in the back seat.

Children should never be left alone in a car, whether they are in their car safety seats or not.

Temperatures can reach deadly levels in minutes and children have died of heat stroke while locked in the car.

Child locks on the rear doors are a good idea when the children are young and provide you with additional reassurance.



Taken from the I.A.M.

[size=150][u][b]How long between “bottleâ€

They're black, they're round, how do you wear them...??


Although most tyres are made to very high quality standards, there are still variations in the thickness of the rubber, the steel belts and the radial webbing that form the structure. One consequence of the variations is a slight weight difference around the tyre. This is well known and easily cured by balancing the wheel and tyre.

A less well known effect of the variability is something called run-out – a measure of how straight the tyre will run if fitted to a wheel and allowed to roll along a flat level surface. Some will run straight and true, others will veer to the left or right in varying degrees. You will see an indication of this on most new tyres – have you ever noticed coloured lines running around the tread on your new tyre? Some of these are to give the tyre distributors easy to read information about where the tyre should be shipped to, but one of them will be a run-out indicator – usually red or blue, and the extreme left or right hand line. The nearer to the centre it is, the straighter the tyre will run, and which side of the centre it is denotes the direction of the run-out.

A steering problem can arise if both tyres on the front axle happen to run out significantly in the same direction. Ideally, when you’re next buying new tyres you should select two with run-out of about the same amount, but in opposite directions – in other words, with the coloured lines both to the inside of the centre of the tyre, or both to the outside. That way the two will cancel each other out and you’ll get straight steering.

Regardless of the tyre combination, a regular weekly check of the tyre pressure – when they are cold – is the best way to avoid premature wear.You will feel the improvement in the fuel consumption as well.And a quick check for condition (no cuts, bulges, or screws sticking out of the rubber!) at the same time is good practice, too



Taken from the I.A.M.

One eyed monster


Dark afternoons and nights have seen the reappearance of the “one eyed monsterâ€

Are you "too laid back"?


One of the most important aspects of driving a modern vehicle is achieving a perfect driving position every time you get behind the wheel.

This is especially important if you share the driving: using somebody else’s settings for the mirrors and seats can quickly leave you tired and at needless risk of a nagging muscular pain as you find yourself “strainingâ€

You Little Belter!


It wasn’t until 1983 that it became compulsory for front seat passengers to use seatbelts, and road safety campaigners have marked the 25th anniversary of this important law.

Right from the start, compliance rates were high for front seat drivers, with over nine out of ten drivers and front seat passengers using their belts.

Yet when the law was extended to include rear seat passengers in 1991, the take up wasn’t nearly as good – and even now, more than a third of adults still decline to “belt up in the backâ€

Give and take


Being prepared mentally for what may happen next when you are on the road, rather than relying on reactions to sort out a problem when it has already arisen, is a key factor in safe driving and riding.

By doing that you can also be prepared for what other road users around you might get wrong. Be ready to keep things safe by what you do to allow for them.

A bit of give and take goes a long way.

This is the opposite of the "blame culture".Instead of mentally complaining because "that white van man just cut me up", have a think about what you were doing before hand and what you could have done, if anything, in a different way to prevent that near miss happening.

The IAM researched this approach with Brunel University two years ago. Using two control groups of drivers, plus a third coached to IAM standards, Brunel were able to evaluate the difference this approach made.

Those drivers who were prepared to see themselves as part of the potential hazard were less likely to be involved in a crash or a near miss than the drivers who just "blamed" other road users around them.

Being alert to the possible mistakes of others may feel like a low priority when you are under pressure, or on a bad Monday morning perhaps. It's easier to expect others to do what they should do, all the time.

But there is no such thing as the perfect driver.Do your bit by allowing for their errors. And, if that feel too onerous, think about this: haven’t you, at some stage when you were driving made an error which someone else then made safe? Be honest - we all have.

So make a point of helping out the other road users who might do the same for you.



Taken from the I.A.M.

Kids in cars: the ultimate distraction


In an ideal world, we would all give our driving 100 per cent of our concentration, 100 per cent of the time. But of course that doesn’t happen.

Driving experts acknowledge that internal distractions can be every bit as dangerous as the external distractions. Both are compounded by drivers simply letting their concentration slip, to the point when they are on “auto pilotâ€

Time for a clean sweep?


A recent innovation has excited some in the car design business – a move that could see the end to windscreen wipers.

Apparently, using “nanotechnologyâ€

Lower fuel bills, despite the budget?


Driving experts say that just a few small changes to driving habits could reduce our fuel consumption by 8.5 per cent, and shave £120 off the annual fuel costs.

Ask yourself: "Do I really need to drive?" It's the shortest journeys - less than two miles – which cause the most pollution and are inefficient in terms of fuel consumption. A straining cold engine will produce 60 per cent more pollution than a warm one. Yet it's these shorter journeys that are ideal for walking or cycling.

Plan your route. A bit of forethought can save much wear and tear - for the car, and the driver. Try to take the most direct route and go off-peak if possible. Sitting in congestion means you are often doing zero miles per gallon. If you have to commute by car, think about car sharing, Park and Ride schemes or public transport.

Check your tyres. Correct tyre pressures will keep wear down and fuel economy up. Under-inflated tyres need replacing more often (itself an environmental problem) as well as being dangerous. Anybody who has cycled on under-inflated tyres will appreciate how much extra effort is involved! Make a point of checking them at least once a week.

Obey the speed limits. Try to "feather" the throttle as you reach your cruising speed. Doing 56mph uses 25 per cent less fuel than 70mph and a smoother driving style can bring significant fuel saving. But never coast to save fuel; vehicle control must not be compromised.

Reduce the drag factor by removing roof racks and carriers when not in use. Driving with the window open also increases drag and lowers fuel economy. Remove unnecessary boot luggage, avoid heavy accessories and wide tyres that add rolling resistance. Air conditioning lowers fuel economy so use the vent settings as much as possible instead.

Use “acceleratorâ€

Getting there, in a roundabout way....


It is not uncommon to come across drivers who go out of their way to avoid certain roundabouts. Even experienced drivers consider them to be “high riskâ€

Too tired to drive?


A simple yawn can mean a few things – you’re stuck in a boring meeting or it’s time for an early night, for example.

But a recent survey by the Department for Transport (DfT) said that motorists who ignore that innocent yawn are putting themselves and other road users at risk if they press on regardless.

As many as one in five of all crashes on major roads are caused by tired drivers. And it may be even more - because those drivers that survive a crash (or a near miss) are unlikely to admit that they were too tired to drive when it happened.

The DfT said that we all want to finish our journeys as quickly as possible but being tired at the wheel is a “proven killerâ€

Things you know, and some you don't.


- Active head restraints, which move forward upon impact to catch the head and increase neck protection;

- Adaptive cruise control, which uses radar or lidar (laser-based radar) to monitor and regulate the distance between vehicles;

- Advanced airbags, which isolate and protect various body parts and, in some systems, deploy at different depths or velocities depending on the occupant's size and position;

- Advanced seat belt pretensioners, which tense up when a collision is imminent and are sometimes paired with seats that automatically adjust for increased crash protection (conventional pretensioners activate during a collision);

- Electronic stability control, which monitors traction loss and steering angle and automatically applies one or more of the brakes to keep the vehicle on course;

- Lane departure warning systems, which signal a driver when his or her vehicle drifts from its lane;

- Telematics, after-crash technology that combines the functions of cellular phones, Global Positioning System receivers and 911 operators; and

- Tire pressure monitoring, which alerts the driver when a tire's pressure is dangerously low.



Taken from the CAR.Com

Emergency Vehicles


Deciding what to do when you hear an emergency vehicle approaching can be a dilemma. Do you stay where you are and potentially block the progress of an emergency vehicle? Or do you move into a position that may put you or other road users at risk?

Unfortunately, some drivers over-react to emergency service vehicles travelling on “blues and twosâ€