Sup ppl Lemmi start off by askin wat is the correct name for this part http://i89.photobucket.com/albums/k215/spam96/Mobile%20Uploads/image_zpsrtegnjqy.jpg Next thing I wanna get one of these for my cressida rx70 I don't actually need the whole thing but if I gettin one I'll take it Now my real ques...
DJQ lemmi hijack you post for a bit as i looking for something similar my goal is to do a system that sounds good but can also get a lil loud... so far this is wat i have in mind any advice wud be great HU: 80prs *need to buy* subs: 3 ctx 10" image dynamics mono: i already had an RD 850.1 front...
Anybody have these things for sale or know where I can source 94 honda accord Rear shocks and mounts Front seats "not too important" Front fenders both sides
yea ppl so this is the amp specs Specifications RMS power, 1 ohm mono 850w x 1ch RMS power, 2 ohm mono 530w x 1ch RMS power, 4 ohm mono 300w x 1ch Signal to Noise Ratio >100dB Low pass frequency crossover 35Hz~300Hz Subsonic filter 10Hz~60Hz Bass boost @ 45Hz 0~18dB Bass boost control 35Hz~120Hz Fre...
i have a 1g engine not sure which one it is all i know it is 6 cylinder. anyway my coil with igniter is gone and i need a replacement for it can you either tell me from which engine if any i can swap this part from or tell me where i can get the original part to buy. a part number would be fine too ...
went engine hunting today to replace my 21r which is in working condition but i would like something without a carb anyway for my budget of 8k i came across the 1g-fe,1g-ge*not sure of the ge* and 1g-gze all complete and all within my budget. i also came across a non turbo 2jz also complete for the ...
toyota men i recently bought a cressida from a guy on tuner http://i89.photobucket.com/albums/k215/spam96/002.jpg it came wit this engine http://i89.photobucket.com/albums/k215/spam96/004.jpg the car run nice so far, but i dont like the fact that i have to warm up the engine b4 i drive. if i am look...
yea people i recently sold my 880 prs and i am in the market for a new deck. now what i looking for is something with similar processing power but what i also want is a usb port. is there anything i can get that comes close ? what are my options
i am switching my 4g15 to a 4g93t, in terms of braking what are my options for an upgrade and right now i have 15" rims would i have to go bigger after the said upgrade.
but if the amp is sending dc current to the speakers can it also go backward tru the rca and mess up my cross ? also if it is the deck can that also affect the cross ? also if i am testing the amp to see if it is actually givin dc current can i test with normal music or do i need to play a test tone...
i was drivin down the road one day playin meh music when all of a sudden the music stopped and i was gettin alot of ground noise comin from the speakers, turned all the volume down which didnt help i had to turn off the deck. when i put the deck back on it played for about 5 mins and started the noi...
my deck recently gave out, if i try to power it on nothing appears on the screen but i realise my amps still power on. i thought the remote from the deck would trigger the amps only wen the deck is on, wat exactly causin this?
click to zoom in, the triangle thingy just makes sure that when the air meets it is directed out of the port instead of battling in the 13.25" chamber, the orange-ish parts are what I think it should look like ( slight flare[cud correct meh on dis]) and 45 the corner b4 the port, [the north ea...
is it possible to play 2 different subs on the same amp ?
scenario... lets say u have 1 jbl and 1 treo sub both dual 4 is it possible to put them together as a 1 ohm load and run them off 1 amp but in 2 different boxes ?
the first box is what my subs are currently in it plays a nice mixture between low and loud but does go as low as i wud like it.... http://i89.photobucket.com/albums/k215/spam96/2chamber32.jpg this second box is a box i wud like to build and test to see if it meets my requirements a lil better than ...
so i not too familiar wit all the terms when i lookin at xover specs. i was lookin at the 6xs. i also saw some good reviews on the clarion mcd360 and kicker kx3. my goal is quality, i dont need competition clarity but i want it clean and crisp. would it make a big difference which one i use ? :shock...
when using external processing *6xs* does it matter how many inputs you have ? the deck i have now only have 1 rca output so would that affect anything ?
I think it should be meh*workable*- im just eyeballing, however we all know kicker subs go crazy in larger enclosures. I don't know what subs you have. From my guestimates you should be around 2.3 cubes around 38hz(port height?) smaller boxes are usually just less efficient in terms of db. so i shu...
i got a premade box online and modified it to use wit my 2 8" kicker l7. it is a dual chamber measurements are 30"W 14"H 14"D and it is made from .75 MDF port length is 17" and the outta port is 2" then it goes into 1" goin into each chamber. box supposed to be tun...
lets say i get the Pioneer DEX-P99RS and i am also using external processing like lets say a 6xs does that mean the processing on the deck wud be useless cuz everything wud need to be flat ?