Hey guys I need some assistance. I have a local model b14 and the automatic tranny went bad. I am only finding foreign use transmissions. The problem is my transmission has a different connection for the overdrive. Only two wires which go straight into the transmission. The foreign used one has a ja...
Hey guys, i need a Clutch pedal assembly for P11 urgently. I have in a pedal, but it is the wrong one, the bolting point at the top does not line up to the chassis, it is off to the left on the pedal where as the P11 should be dead center in the pedal. Can anyone point me in the right direction? or ...
I am converting my P11 to manual, i need some help. I got a SR18 gearbox with the fins on the front, it is hydro with top mount. What back mount bracket do I need to use? The B14 or i need to get a manual P11 bracket? My gearbox does not have that point to stabilize, that is in the pic below. http:/...
as post says, i need the parts to convert my p11 primera to manual. Prefer to get p11 SR18 Gearbox. Can anyone help me out or point me in the right direction? Shifter linkages Shifter surround trimming back Bracket clutch Pedal brake pedal master cylinder Lines Reservoir Flywheel gearbox and axle, d...
Also, i know it does not carry the traditional sub frame, the bottom arms are bolted directly to body, would i be able to put on a FWD sub frame (cradle) and use normal setup, are bolts holes still there?
Thanks for the reply, but what about cross member, 4wd does not carry a cross member like the front wheel drive b14. Engine bay setup like the GTI-R, with the front mount that bolts on to radiator panel.
Hey guys, have a quick question, i have a 97 4WD B14. The auto tranny died. Is there a simple way to convert to fwd? Using a fwd tranny? What about cross member and mounts?
Hey guys, just need your input. I recently sourced a SR20DE roller Rocker engine. The engine is in great working order, it was removed from a P11 Primera SRI Uk version. But after doing my research i found that these engines in the UK are rated only at 130HP that come in this particular trimming (SR...
Hey guys, i got rid of my Pulsar, i have a P11 now, i want to convert it to manual. My concern is the shifter and linkage, can anyone tell me if the B14 or B13 shifter and linkage can work?
, thanks bro, see that helps, it is a daily driver, which is ruffed up on few occasions, not a track or race machine, motor is stock, can count times on one hand engine saw rev limiter.
Am i missing something, did i ask a messed up question? I read the Optimizing your sr20 sticky, just wanted some other opinions. It is always a heated argument here pertaining to which oil to use in Older SR engines, Roller Rockers and SR20VEs. Because here the nissan is not that popular in performa...
Hey guys can you tell me which oil you guys recommend for a Roller Rocker SR20? Well grade that is. some people telling me 10-30 some saying 20-50. Which to use?
Check the top control arm. It is about 8 inches long looks like a dog bone at the top oh shock assembly, bolts onto chassis, these usually go bad, they carry 2 bushings.
I had a SR20 box that did that, hated that box, 3rd gear pulled me to 180+ with RPM left honest, 1st and 2nd were ok, but 3rd felt like you shifted to 5th.
Anyone know where i can find one of these gearboxes. And the cost, i am not in Trinidad. So i would need it shipped. This would be going into a B14 so i would need clutch pedal, master and slave cylinder as well. http://i239.photobucket.com/albums/ff69/omaritech2/HydraulicGearbox.jpg