Forums

@ nervewrecker ,The price of a fender was $1500 , the bumper was $4000 to$6000 depends on the dealer, but the prices are going down. You can get a fender for $1000 and a bumper for $3000. I got some parts by a guy next door to your straightener in Akbar Tr. at reasonable prices. Seems he brought in...

Depending on the system, conventional fixed flow type evaporators aren't used with vrf condensers. Im not saying there aren't but to my knowledge there is a solenoid type metering device. Not sure of there are fixed flow type evaps for commercial vrf systems. Eventually they will need to clean the d...

@ nervewrecker ,The price of a fender was $1500 , the bumper was $4000 to$6000 depends on the dealer, but the prices are going down. You can get a fender for $1000 and a bumper for $3000. I got some parts by a guy next door to your straightener in Akbar Tr. at reasonable prices. Seems he brought in...

They need body parts regular?

how are the prices on parts like fenders etc?

In any machine shop you go to Nissan vehicles account for 95% of suspension bushing work... nissan make good engine, thats about it. Friend has an aqua. I always hated the car because its bottom of the barrel price-wise so I assume its junk. Then, its a hybrid...so its a dead ass horse. Met an aqua...

I'd say ditch the LOC. less equipment in the chain.

Hi, Just a bump. A few years later. Who is the best company to call for a central system? Need about 30 tones of cooling. What kinda area you looking to cool? I assume is ducted you looking at? Bear in mind a central 30 tonne system is a piece of money plus duct work. Most places seem to be going t...

Where steffy? Nevertheless, I am 100% positive someone there is a tuner. Kinda rides he has / had. I opted for a used vehicle instead of from the firm though. No issues. Does have deals that pop up every so often. A tuner bagged a suv recently, mint condition, low mileage at 1/5 the price of what th...

Seems like someone is reading in here and knows who I asking about and who I am.

Maybe if yuh take de car out from under them mango tree it does be you might make some respectable power.

He still lucky though he is to some extent. but for every one lucky man it have a hundred unfortunate souls put thru hell & high water with little to no recourse & some serious problems down d road. all because of a clothespin gyul. I know a young fella that went with a lil baddess. not lon...

Ah, so it's the hammering causes it.
Well I guess as gasket material is kind of elastic it should take some licks vs something brittle when cured.
We shall see

When you say excessive time on idle, you mean on standby with the discharge chamber pressurized and waiting for use? I have had a habit of doing that while washing cars. Will leave it ready for use while I rub down and clean. Sometimes 15 minutes or more. After seeing the design I realise that may h...

I roughed up the surfaces and used some gasket sealant on them. Left to cure 24 hours and so far no issues with one. I will try the other when I get a chance. It literally took me 15 minutes to do the smaller one as I had some practice on the bigger one and the smaller one was far easier to do as it...

The electric karchers have a plastic pump head manifold It is a weak point and tends to split and leak, will cost almost same new price to fix by Hadden. Happened to my electric karcher twice and it didn’t have much usage, mostly washing m6 vehicle. They don’t admit it but if you ask the techs in t...

^^ First of all marry a very hot attractive linda hermosa woman . Leggo beast & gorda mujer give you sex but it a man trap . Keep her in shape and do not feed her lots of sada, aloo choke her , dasheen, eddos y yam. Make her a smoothie everyday for breakfast with lots wheat germ y granola y 2 r...

What y'all think about AC "Technicians" who leave your sheit in worse condition than they found it? A cuntractor come by me to do a BASIC MF CLEAN, ended up f**king up the IR receiver. I now have to open the unit to turn it on. I was living with it like this for a couple months, decided t...

Is the same guys I tell you about f**k up his stuff. Same name as you Ted, you must see his page on fb. They f**k up a lot of tuners stuff it seems. Is only complaint after complaint. I wondering if is only my clients they do this to but seems like the norm for them. Left them on an install by a tun...

and use the rca's

Kk.. so how does the 'land as collateral ' process work? Basically, like any collateral, you have to show that the land is worth the amount you want to borrow, interest included. T/C approval, along with a valuation, and title search is what the banks tend to want to see. Yep, plus free from all en...

We must discuss this next time I stop by.

https://scontent.fpos2-1.fna.fbcdn.net/v/t1.0-9/74218946_148282646425717_3291473789589651456_n.jpg?_nc_cat=109&_nc_oc=AQlFVCUBMtZV3O8_ucD5Bz7jiWGktkTWi9-9sWo_ARTa-VKvoMUOWNbDpxNQ-6kj4oU&_nc_ht=scontent.fpos2-1.fna&oh=6f13e36ea42b4aec617c19469f470b37&oe=5E4CAE5C over la brea :fadein:...

Anywhere open tomorrow?

Have to get a motor re-winded tomorrow. It's from a semi-hermetic 40 or 35 tonne system. Delta delta (I assuming its 230V).

Thats all the info I have from person on site.

Either that or a new one put in. Job HAS to be done tomorrow.

Can reach me at 373 1095 or PM me.

fokhan_96 wrote:Anyone has a contact for anyone who wants scrap iron to sell ?
I have some that would give away for free. Just want to get rid of it.

yuh get the refinery?

on a serious note though, seems I have a load to drop off. Dont mind the extra, where you from?

Ha has two layers of second skin and two layers of dd material.
I did those doors.
I think it's the amp..
Had experiences with some lower end amps lacking the thump on the lower end and the crisp on the high end

kamakazi wrote:
VexXx Dogg wrote:If the outlook is that bad, why are more stations opening?
I think np stations are owned by np and unipet stations are owned by private operators
If np is government essentially.

donno why they dont try to get the corn fuel here.

Some pics from by the creek

: IMG_20191029_122256.jpeg (7.58 KiB) Viewed 155 times

http://www.cnc3.co.tt/press-release/shutdown-among-unipet-service-stations?fbclid=IwAR3JpjXTar29A7R35yzHQX-EKys3044BrwAtaDX5coMrmBOr6ctW_wmcIhM#.XbhFL7Iv_-s.facebook http://www.cnc3.co.tt/sites/default/files/Unipet.jpg While the National Petroleum Marketing Company (NP) has dispelled as 'rumours' cl...

A pic I took last night. Received mine from titan procurement divali night. Haven't managed to do a proper zoom up pic yet as I looking for a good location. Had very little to no light. Phone does well in low light. So far so good. Rather impressive for what it is though. https://uploads.tapatalk-cd...

pugboy wrote:Doh forget allyuh history
When the queen buss it from here she handed over to a chinee eh
Solomon Hochoy
Like she didn’t trust the others

Our national anthem composed by a Trinidadian?

Not stirring up anything, asking for a friend.