Forums

psycostud666

Basically, Cressida and Mark II are the same chassis, if you lucky to get springs and shocks from a foreign Mark II that came with a 6 Cylinder, it should hold good. There is a Head Up Display unit being sold on Ebay which shows Tac and Speedo, it Jack's into the diagnostic port, but you have to kno...

psycostud666

LF: 20V ST Clutch, PPlate and Release bearing.

Anyone know where i can get the genuine stuff (Besides Toyota), my last purchase was at Chaguanas Auto Supplies, but they out-of-stock.

PM please,

Thanks

psycostud666

Wont the 1ZR or 2ZR be good options? these engines did come in some Altis and they have better designed VVTi systems.

psycostud666

Guys, Just bought an Integra with a SOHC Non-VTEC ZC dual carb engine, hoping to swap it out sometime and convert to a B18 efi. In the mean time i want to get it running and need a manual for this engine. Tried looking online but all the hits came back from sites in the USA and this engine seems to ...

psycostud666

It does this to get the girl
http://www.youtube.com/watch?v=MGYGSqGz3gM ... then that^^^^^^^

psycostud666

I found this while on Denso's Website, it a new set of plugs they have.

http://www.globaldenso.com/en/products/ ... /03_1.html

Anyone knows which would be the proper application for the 4AGE ST

Hook, maybe you would have some insight...

psycostud666

Really old thread, have lots of usefull topics in this thread.

Thanks Hook....

psycostud666

Nice... like a baby LFA :D *edit - Is that a flat-4 I seein' dey?? That's not a flat 4, call it by the right name, horizontally opposed 4, the famous Subaru Boxer with the upgrade of the Toyota D4S injection system. Some ppl call it that, but the "flat 4" name was more suited for the VW.

psycostud666

This ride looks really sweet.. is that a 2ZZ in the Allex?

psycostud666

The GT 86 is available on the market for sale in T&T. There two for sale on Tradecarview.com and can be shipped here once purchased. You will be looking at around US$42K just for the car...

We may have to wait just a lil bit longer for the prices to drop...

psycostud666

WTB an AC Compressor for a 4AGE 20V. Anyone?

psycostud666

vintage project in progress....

RB25DE installed, just need to wire and a minor bodyjob

psycostud666

What's the correct fuel pressure required for the RB25DE engine...

I need to get a fuel pump but all that i am getting are the TRE and Wallbro which put out about 40 psi.... Is that sufficient?

psycostud666

A recently released article estimated the cost for the GT86 to be around US$20,000.00 while the Subaru BRZ will be around US$26,000.00 The BRZ will boast nearly 100 hp more than the GT86 and have a more Subaru-ish look. The new D-4S system utilizes both direct injection combined with port injection...

psycostud666

Anyone else got the scoop on this? Article from Top Speed: "Toyota must have realized that their cars were pretty boring, so the Japanese company is set to release a few hybrid sports cars. There will be two coming with names that should sound pretty familiar to car lovers. The first will be th...

psycostud666

A recently released article estimated the cost for the GT86 to be around US$20,000.00 while the Subaru BRZ will be around US$26,000.00 The BRZ will boast nearly 100 hp more than the GT86 and have a more Subaru-ish look. The new D-4S system utilizes both direct injection combined with port injection ...

psycostud666

not bad...u got pics of the new bracket u made? No, i did not take any pics. i used the one plastic bracket i had already and made one metal for the right side using a piece of flat steel, two 10 bolts and 2 washers. after i did all that, i got the message from Audiostar, he probably has the bracke...

psycostud666

audiostar wrote:CALL AUDIOSTAR 3850323

Dude, you posted to contact you the day after i built the bracket.. i'll call if i need anything

I got the lights on.... have a look

psycostud666

*facepalm* did u verify? all you'll need is a phillips head screwdriver inno I did check, nothing off the original light can work except the little circle spacer. the stock lights come with one per side, but i need two per side. i need a camera to take a pic of the bracket to show you. Someone who ...

psycostud666

Any help with this guys? Please

psycostud666

So as you put back in stock lights in the meantime, are your corner lights holding only by the screws on top that connect it to the headlights? Cuz IIRC, those two stubs on your aftermarket lights are supposed to line up with two small plastic "brackets" that were originally intended for ...

psycostud666

Would i really get that in the scrap yard? wont the nose cut have the original lights that have the bolts facing sideways?

psycostud666

Hook,

I am missing the plastic bracket or as you call them, spacers for the two pins to pop into. thats what i need to get... Any ideas?

psycostud666

This is one comic topic....lol

Good thing i does bann myself every now and then...

psycostud666

Sometimes the recommended oil may not be the correct choice due to the age of the engine, or what is your daily commute. I have a 4age and a mechanic told me its recommended that i use 10w30, but because the engine is over 10 years, i should 10w40. another mechanic said its fine to use 20w50, i did ...

psycostud666

You bought the kit locally? Why not take it back if it's missing pieces? I'm not sure what you mean by "the little plastic bracket that bolts on the body to hold the light in place" tho, but if it's what I circled in the pic below, you bought a broken item. http://forums.trinituner.com/up...

psycostud666

ok dudes, I screwed up my last pair of projectors and had to put on the stock lights. I just bought a new pair and i noticed they did not come with the light socket for the park light and the little plastic bracket that bolts on the body to hold the light in place. i kept the light socket and bracke...

psycostud666

Let me see, i got a windshield leak, very freaking hard to find where it was. My seats keep getting slack, my tach gone. I hearing all kinda creaks from all over the interior. tail lights and tailgate finisher always getting loose. my broadview rear view mirror keep falling off. Good thing i dont ha...

psycostud666

At the price these things are selling for, i dont tink we're gonna see any in trinidad any time soon. You cud get 3 GTRs for the price of one LFA.

psycostud666

I think this is a good idea. I just need to get meh 70 rolling again. Just need a 4k or 5k to slap back in. Or if i cud get an Injected RWD engine and tranny/box. The car just sitting home collecting dust. was planning to sell the shell. i have parts if anybody might need. Back-half with trunk lid a...