TriniTuner.com  |  Latest Event:  

Forums

Search found 30 matches

by mitsubishi scud missle
February 12th, 2013, 6:25 pm
Forum: MITSUBISHI
Topic: Need help no spark
Replies: 2
Views: 833

Re: Need help no spark

ok i got it sorted out, it was the brain box the 12 volt that was applied reset the box, the electrician said it had cold solder
by mitsubishi scud missle
February 8th, 2013, 3:28 pm
Forum: MITSUBISHI
Topic: Need help no spark
Replies: 2
Views: 833

Need help no spark

So I changed plugs swaped coil packs with another cs and car still stuttering, I applied a 12v to one of the coil pack wires and the car started working fine but every now and again it starts right back, i was told it was the crank shaft position sensor can anyone shed some light on this. and where ...
by mitsubishi scud missle
July 16th, 2012, 10:32 pm
Forum: HONDA
Topic: W.T.K ek3 civic headers
Replies: 4
Views: 1020

W.T.K ek3 civic headers

so i saw some headers for the ek3 civic on ebay for about $60us i was wondering if this would be a good buy, if anyone has personal experience with them oh it was the 4-2-1- exhaust headers
by mitsubishi scud missle
April 28th, 2012, 9:23 pm
Forum: HONDA
Topic: W.T.K. d13b tranny and d15b engine
Replies: 1
Views: 921

W.T.K. d13b tranny and d15b engine

so i was wondering if a d13b tranny would work with a d15b 3 stage vtech engine, thanks
by mitsubishi scud missle
March 5th, 2012, 10:16 am
Forum: HONDA
Topic: My First Civic
Replies: 11
Views: 2334

My First Civic

this is my first civic tell me what you guys think
by mitsubishi scud missle
February 16th, 2012, 11:16 am
Forum: MAZDA
Topic: W.T.K. Difference between Protoge and 323
Replies: 1
Views: 1091

W.T.K. Difference between Protoge and 323

I am interested in purchasing a 323, 2003 modle but i wanted to know the difference between the protoge and the normal 323 thanks.
by mitsubishi scud missle
September 26th, 2011, 5:36 pm
Forum: HONDA
Topic: eBAY Headlights EK3
Replies: 5
Views: 1982

Re: eBAY Headlights EK3

I had the same problem but I was advised to leave it as is so I use my fogs as park lights but holes can be at your own risk
by mitsubishi scud missle
August 13th, 2011, 6:52 pm
Forum: HONDA
Topic: can ek4 99-00 bumper work on 96 ek3
Replies: 6
Views: 1114

Re: can ek4 99-00 bumper work on 96 ek3

You have to change every thing bumper bonnet grill fenders and you will have to cut the bracket that holds the bumper and drill new holes for it to fit I am doing the conversion right now
by mitsubishi scud missle
April 16th, 2011, 9:09 pm
Forum: MITSUBISHI
Topic: overheating
Replies: 2
Views: 585

overheating

well ah lend meh sister the cs3 and it overheat till it shut down, now it by the mechanic he tell me ah need a head and block, wtf, in my experience all i need is a head why dod i have to buy a block can anyone shed some light on this
by mitsubishi scud missle
April 9th, 2011, 9:09 pm
Forum: HONDA
Topic: EG9 Seats
Replies: 4
Views: 1439

Re: EG9 Seats

i saw one too a silver loved the look, wonder where i can get a set of eg9 seats
by mitsubishi scud missle
April 9th, 2011, 6:13 pm
Forum: HONDA
Topic: EG9 Seats
Replies: 4
Views: 1439

EG9 Seats

Cant the seats of the eg9 fit in the ek civic or is there an ek that comes with the two bucket seats and center consol in the back
by mitsubishi scud missle
March 16th, 2011, 6:54 pm
Forum: HONDA
Topic: W.T.K. Camber Kits
Replies: 4
Views: 1129

W.T.K. Camber Kits

Are those camber kits on ebay any good i am seeing them very cheap compared to the skunk and buddy club?
by mitsubishi scud missle
March 4th, 2011, 9:40 pm
Forum: HONDA
Topic: W.T.K. Ek3 rear bushings
Replies: 2
Views: 594

W.T.K. Ek3 rear bushings

ok, well the big bushing in the back of my ek3 buss, when i went to buy the polyurethene bushings they told me is the bushing is not the oem it might not work.now this car is over 10 yrs old and i cant be sure if a previous owner changed it. is it adviseable to purchase a substitute and just fill it...
by mitsubishi scud missle
February 27th, 2011, 6:17 pm
Forum: HONDA
Topic: Help changing a deck in 99 EK3
Replies: 5
Views: 1085

Re: Help changing a deck in 99 EK3

Buy a tester its about $25 clamp one end to any metal part behind the dash, turn the ignition off and stick the pointy end into the harnes checking each wire until it lights up. that will be your battery wire, then put your ignition on and do the same thing when the tester lights up turn off your ig...
by mitsubishi scud missle
February 18th, 2011, 11:16 pm
Forum: HONDA
Topic: W.T.K. Suspension
Replies: 3
Views: 750

Re: W.T.K. Suspension

I had a cs3 lancer before and i got some shocks from the cs5 and they were way shorter, it lowered the car without having to buy springs, so i thought it might be the same with the civic. i want the car to maintain its smooth ride but just lower,
by mitsubishi scud missle
February 18th, 2011, 8:39 pm
Forum: HONDA
Topic: W.T.K. Suspension
Replies: 3
Views: 750

W.T.K. Suspension

Ok guys this is my first civic and i just looking for some local information, are there short shocks for the 99-00 ek3? Because my civic is high, about 4 fingers can fit between tyre and fender, while me cousin have a roro civic and it almost looking as if he drop it, only two fingers can fit betwee...
by mitsubishi scud missle
February 6th, 2011, 10:08 am
Forum: HONDA
Topic: W.T.K. Fluctuation Idle
Replies: 5
Views: 1514

Re: W.T.K. Fluctuation Idle

Thanks speedfreak44, I think my mechanic is an ass, he told me to buy a throttle
by mitsubishi scud missle
February 5th, 2011, 10:13 pm
Forum: HONDA
Topic: W.T.K. Fluctuation Idle
Replies: 5
Views: 1514

W.T.K. Fluctuation Idle

I have a local 99-00 ek3 civic and the idle revs from 1000 to 2000 rpm i was told it could be the idle controll valve but i bought a throttle body in the bamboo and got the same problem, any help would be appreciated

also when the mechanic block off the choke it stopped reving
by mitsubishi scud missle
November 12th, 2010, 2:39 pm
Forum: MITSUBISHI
Topic: The Official 2nr Mitsubishi owners PIC thread.
Replies: 2239
Views: 379023

Re: ONE PIC!

my contribution
by mitsubishi scud missle
September 9th, 2010, 7:42 am
Forum: MITSUBISHI
Topic: wtk where is d aicondition filter located in d ck lancers
Replies: 8
Views: 1385

Re: wtk where is d aicondition filter located in d ck lancer

It is under the dash and very hard to get to, your best bet is to let an aircondition tech do the job, it might be hard to get a new fiter but the technician could just change the fliter material
by mitsubishi scud missle
April 28th, 2010, 10:26 pm
Forum: MITSUBISHI
Topic: W.TK. lowering a CS3
Replies: 2
Views: 1192

W.TK. lowering a CS3

i want to lower my CS about 1'' i know the ride will change but i dont want it to ride like sheit any advise will be appriciated
by mitsubishi scud missle
April 17th, 2010, 9:47 pm
Forum: MITSUBISHI
Topic: WTK CS reving very high
Replies: 3
Views: 903

WTK CS reving very high

When i start my car and the engine is cold it rev very high for about 3 mins but once it is warm it revs normal by the way its the CS with the 4G18
by mitsubishi scud missle
February 18th, 2010, 6:47 pm
Forum: MITSUBISHI
Topic: W.T.K. 4G93 in a CS
Replies: 4
Views: 903

W.T.K. 4G93 in a CS

Does the 4G93 sohc or dohc fit in the CS lancer bolt for bolt and what is the average cost of a 4G93 engine and tranny, also besides wireing what other mods will i have to do, thanks in advance
by mitsubishi scud missle
January 25th, 2010, 6:50 pm
Forum: MITSUBISHI
Topic: CS CHASIS
Replies: 1
Views: 529

CS CHASIS

WANT TO KNOW WHO DOES GOOD CHASIS WORK
by mitsubishi scud missle
November 17th, 2009, 3:51 pm
Forum: MITSUBISHI
Topic: W.T.K. What is the best way to drop a ck2
Replies: 14
Views: 3874

W.T.K. What is the best way to drop a ck2

as the topic says i was wondering whats the best way to drop a ck lancer in order to keep the comfortable ride
by mitsubishi scud missle
August 16th, 2009, 1:31 pm
Forum: MITSUBISHI
Topic: w.t.k. 2.0 gdi engine
Replies: 2
Views: 455

will do,
thanks
by mitsubishi scud missle
August 15th, 2009, 8:09 pm
Forum: MITSUBISHI
Topic: w.t.k. 2.0 gdi engine
Replies: 2
Views: 455

w.t.k. 2.0 gdi engine

where can i get an idle control valve for a 2.0 DOHC gdi shark mouth Galant
by mitsubishi scud missle
January 24th, 2009, 11:17 pm
Forum: MITSUBISHI
Topic: W.T.K. EURATHANE ENIGINE MOUNTS
Replies: 4
Views: 940

thanks alot for the help, i will get started on this a.s.a.p.
by mitsubishi scud missle
January 24th, 2009, 10:38 pm
Forum: MITSUBISHI
Topic: W.T.K. EURATHANE ENIGINE MOUNTS
Replies: 4
Views: 940

W.T.K. EURATHANE ENIGINE MOUNTS

I have a CS3 Lancer wiht flimsy engine mounts does any one in T&T sell Eurathane mounts or the Eurathane mount kit?
by mitsubishi scud missle
January 10th, 2009, 4:16 pm
Forum: MITSUBISHI
Topic: [b]W.T.K. VR4 6A13 TT Engine[/b]
Replies: 1
Views: 685

[b]W.T.K. VR4 6A13 TT Engine[/b]

I saw this engine and fell in love with it can this fit in a CS3 and what are the pros and cons of this engine
oh and price [/url]

Go to advanced search