Forums

kripplerz

Cutting a wire to fix a problem, what effect did that cause on the system, would it cause any further problems.

kripplerz

any door visors ?

kripplerz

Couva message or call if you want.

kripplerz

There is alot more to take into account when it comes checking an alternator by just referencing the voltage by the battery terminals. All alternators now are controlled by the ecu. If the battery is fully charged there is no need for the alternator to output 14v. Other aspects must be taken into ac...

kripplerz

Any updates with your situation. Is your batter still ok, alternator working fine ? Curious to find out.

kripplerz

The workshop manual usually have that info. If it does I can check it for you.

kripplerz

kripplerz wrote:Message or give me a call at 7040609

I can check your fuel injectors fuel rail and pump without taking out anything.

kripplerz

Message or give me a call at 7040609

kripplerz

If you are getting that low of a voltage your alternator not operating properly.

kripplerz

I have a computer I use just for downloading and looking at shows and recently I really noticed it slowed down quite a bit not realizing the cause. I'll have to check on this, and also I have been looking for a VPN if anyone got one and can share their experience that will b fine.

kripplerz

U have to keep him/her busy otherwise trouble. Ours is very protective. But very vicious.

kripplerz

I have always used premium since fuel price went up. Decided to try super filled up by the new gas station by Monroe road. Had the same issue when I filled super at that station last week. Pinging at low rpms in 3rd and 4th gear. I threw in a Schaeffer's neutra in the tank and it ease up. Thanks fo...

kripplerz

m@x wrote:having the same issue with the super as well smh

Knocking or missing.

kripplerz

I have always used premium since fuel price went up. Decided to try super filled up by the new gas station by Monroe road.

kripplerz

Dude I thought was only me having problems. I usually put premium in my car. About a week ago I filled up with super 290 worth. Now the car have a bad misfire, it keeps missing missing at low rpm. Planning to drain the tank tomorrow or drain as much as I can and refill with premium and see what goes...

kripplerz

As previously said older cars had internal regulators new alternators are controlled by the ECM, reason for the extra wires to the alternator. The ECM turns on and off the alternator a few times per second using pwm or duty cycle signals, so therefore the newer pulley absorb this shock, if it was fi...

kripplerz

Wondering if your problem sorted out, I also have a j32.

kripplerz

Hi you made any headway with the info you are looking for, what exactly you are looking for at those pins.

kripplerz

How much was the ticket.

kripplerz

Any update on this matter.

kripplerz

This technology has been around years now. It would be interesting to see the feedback from people.

kripplerz

Anyone know where I can get some all thread nylon rods 5/16. Nylon nuts and washers also.

kripplerz

trapstar wrote:I'm looking for shocks for my j32 front and back can someone tell me price plz

Hi, I’m currently looking for front shocks for the same j32, did your ever find them anywhere. So far I’ve not found anywhere In central that have them.

kripplerz

I’m on my second mal first one got poisoned the current one is about 5 yrs old. Very nice pups. My one is very aggressive they are very energetic dogs. I give him the pro plan lamb and rice and pet rice and meat. They need lot of attention and training otherwise they will b a rell headache. https://...

kripplerz

Ngannou

kripplerz

70 pounds is plenty. Good luck toting that.
I believe these are not really for moving around. I link that wherever u put it it remains there it won't move easily if anything hit it.

kripplerz

I have a de Walt chopsaw about 14 years now. The base it's the pressed metal type and due to use constant tightening of material the base it a little warped. This causes really bad miters. I would say if u can afford it go with a solid base saw.

kripplerz

Best bet would be a chop saw. The question is what tools do you have access to ?

kripplerz

Yes the fence always needs a little adjustment. I gave up on the laser I don't use it. I can't really hate on it otherwise it cuts clean and neat. And I like that everything can be adjusted. Good job on the welds I'm a bit jealous though because i do some welding now and again and it's hard to get a...

kripplerz

Good day folks.. sharing this update. I cant weld.. but when a welding guy wanted to charge me $9500.00 for simple windows to put in my shipping container office..i decided its time to learn. I brought in an Evolution Rage 3 saw (this is realll mad) made fabrication so much easier And i have a Hilc...