looking for a dsp or headunit that will give me both left and right eq,2-4 way crossover with adjustable lp to hp 6db-24db slopes ,individual time alignment along with indiviual gain and phase control and a good voltage output along with a good enough signal to noise ratio and a upfront controller. ...
-3db - 29hz to 111hz 0 db - 32hz to 85hz 3 db - 35hz to 60hz 5db - 38hz to 48 hz peak is around 42- 43 hz Can you explain this please. I'm a bit lost as to how this was generated. This is what the graph looks like on winisd It gives a range of what frequencies are naturally boosted by the enclosure...
So played around with the crossovers on the amp today and achieved abit more mid bass and very pleasing sub bass as well. Not exactly sure to as what are the crossover points though ( just played around with it until it sounded better) Got a better up front sound stage with the sub as well but I thi...
90% of d time factory recommended specs for whatever brands usually suck, they always give a small cuft so ppl will say oh it doesnt take up much space & buy that product when in fact if u plot close to a flat or low end response it can be as much 2 times recommended go plot that sub to see how...
So using winisd i re calculated an enclosure. using an enclosure of 1.4 cubic tuned to 35 hz ( minus port and sub displacement ) this is what im looking at on the graph
-3db - 28hz to 110hz 0 db - 30hz to 84 hz 3db - 33hz to 58 hz 5 db- 35hz to 49hz
40-60 shud be d easiest thing to get without even trying might want to look into ur amp's lfp, hpf & ssf if it have 1 ... ry lowering ur lpf from 100 to about 80hz, it shud tighen ur bass response depending on ur enclosure design too well i suffering in that range lol box is built to re specs -...
Can you give any examples of songs (specifics wrt album etc) where you identify the bass as lacking? between 40hz to 60 hz i would say Lol. Two things. I was curious as to the songs so I could have played the exact ones myself to hear what it sounds like on my system. Also, in some of those types o...
sucks that ur deck doesnt have a custom 1&2 setting & limited features, maybe time to get a new 1 he said in his 3rd line of posting : Re Audio Scx 10 tuned to 34hz with an F3 about 29hz box design is always important & like said above box position is equally as important , i have helpe...
epi might be what ur looking for but b4 spending d $ on it try this most decks wud have 2 custom eq settings , set custom 1 eq to play with songs that already bass heavy & on custom 2 for normal pop without much bass : adjust bass eq bands a bit higher like 3dbs or accordingly on 40-50-63-80 ba...
Seems that your midbass is not prominent as it should be. Ensure that your woofers and sub are in phase. What your crossovers look like? Is the doors treated any? I suggest you go with a sealed box as it is generally easier to integrate with door woofers. Doors are treated with dynamat and dynaline...
My Equipment Xfire Audio e9005 5channel class d Re Audio Scx 10 tuned to 34hz with an F3 about 29hz Alpine type r components Alpine 117 headunit I listen to different genre of music, soca, rap, reggae, alternative rock and sometimes rebassed music. Formats included 320kbps mp3, 256kbps aac and origi...
Need advice on choosing a sub for a sq build. Subs in mind- JL Audio W1v3 12 or Image Dynamics Id 12 max cubic space i have to work with is 1.4 cubic ft looking to do a sealed enclosure but open to also doing a ported enclosure( advise on tuning frequency) Max Rms i have to work with is 300rms
For all those who may know, can a alpine ktp 445 brick amp be somehow used with a pioneer headunit? Recently bought a car that has a double din pioneer headunit and jbl coaxial speakers. now seeing that the headunit is powering the coaxials and is only giving about 18rms x 4 and alpine power pack is...
Id say go for cone area since power is an issue. but 1 10" and 2 8" are roughly same. Have the same amplifier, had it on a 10", its ok for what it is. do you experience any kind of over heating from this amp? Tested the amp a few days back to make sure everything is working and durin...
hey guys pics coming this week. install had to be delayed abit due to engine upgrades and funds being low. lol. question though , since im lookin to reduce weight on the sub box i planned to use an aeroport but wanted to find out would it make sense to use an aeroport of just go in the hardware and ...
Id say go for cone area since power is an issue. but 1 10" and 2 8" are roughly same. Have the same amplifier, had it on a 10", its ok for what it is. what was the sub impedance you used if you dont mind me asking? Dual 4 ,dual 2 or single 4ohm? saw the sub channel on the amp is rate...
Front doors and trunk has dynamat superlite on it.liked the morel sub cause I heard it in a evo 9 and the sub isn't all that heavy (10lbs I think). I still have a pair of jbl gto 8s as well so also was thinking if to use those and was wondering if the amp would play them comfortably seeing that the ...
Ditch the head unit, processor and linedriver and get something that does it all. Simplify the system, I know about rca failing and making you scrap 60 percent of the system to figure out the odd static, popping ect. I guess a good installer is key unfortunately i already have to equipment and make...
Jbl ms8 is only 2.8 volts out so keep the line driver This is the reason i got the line driver . Now seeing some of you think i shouldnt use it and SR saying i should( more advice on if i should use it or not? My aim is to get good sound quality as the car is use for daily driving. looking to do an...
equipment alpine cda 117 headunit jbl ms 8 processor Alpine pdx 5 5 channel amp alpine spr 17s type r 6.5 inch woofers alpine spr 10tw type r tweeters jl audio w1v3 12 Alpine Type x Passive crossovers with Bi- amping capability would it make sense using the passives in a bi amp configuration ? or sh...
some specs on the tweeter 1" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter remove...
Currently have a pair of alpine spr 17s type r 6.5inch comps. Original tweeters were damaged so i upgraded to alpines spr 10tw tweeters now it seems that one of the passives that came with comps isnt working but i have a pair of alpine type x passives just laying around. WOuld it be recommeded to us...
