Forums

ward one

Real nice

ward one

Did d survey

ward one

This lazy mofo didnt wanna get up n eat

ward one

2 month old pup

ward one

TurboSingh12 wrote:Change cam/crank sensor.

^^^ I suspect this aswel

ward one

i am a proud owner of a mechman alternator, right now i am using a 370 amp unit (daily drive). i previously had a 270 amp with a external voltage adjuster. i also had a 400 amp unit installed for a couple of months. i use my car a couple times for the week (no long distances) and to go shows during ...

ward one

yes it can work, once the amp can take 2 ohm load per channel (most do). however u will have to run everything in stereo (ie. 1 channel to 1 speaker both front and rear). do not bridge the amp!!!

ward one

i wud have to say the dd m4a. these amps are very strong and of high quality. used from the m2b straight up to m4a, s2b, ss4a, c5c, and the list goes on. lol was also able to safely run the m3a and m4a at 0.5 ohms daily play (with a voltage of over 13v minimum) and use of input terminals ;) thanks t...

ward one

cutthroatInt wrote:Where u getting rotors for bt50 06

not sure bro our van is the newer model and my mechanic sourced all the parts for it.

ward one

my dad has a 4x4 auto bt50. TCP reg. van is currently doing 120,000k's serviced by the firm. up till this day nothin has gone wrong or needed changing besides regular servicing. after the 100,000k service van started back working like the day we got it from the firm. this is my dad's 4th mazda from...

ward one

I did. :) me n sum buddies from class did this as we had nun much to do. we used a transformer from a old pyramid amp i had. plugged directly into the wall and jack in ur phone n speakers and enjoy the music :D used a 4x4 pvc can as the amp case. and added a 3" computer van to the top cover for...

ward one

kurpal_v2 wrote:Why you leaned toward the fital more?

size and weight was key for this install . the faital pro can be crossed at 900 hz with a 12db slope (as recommended by the manufacturer). vs the 1.2k hertz (as recommended by radian.)
otherwise these 2 factors i will place the 2 drivers on the same level.

ward one

faital pro hf20at is the best driver i have ever used. and i used all other 2" high end drivers out dere. You ever used the radian 850pb? I personally find those to have better highs reproduction, smoother sounding up top IMO. i have heard all of the radian drivers n the faital pro is very sim...

ward one

sound boy 64 wrote:
SaW wrote:yuh should go with a powerbass asa 1000.1

This.

Nervewrecker has one he's selling for small money I think

x2 and his stuff in mint condition!

ward one

faital pro hf20at is the best driver i have ever used. and i used all other 2" high end drivers out dere.

ward one

ruffneck_12 wrote:
caliph tec wrote:
MonsterPower wrote:dan lanzar and pure power doh go together...odds are u gettin 1/2 the rated power

true but i feel lanzar only good 4 mids d mono block dos rel clip so time u tune that amp is maybe 1/4 or less gain

men judging amps by gain potential yes

lol

ward one

pioneer wrote:Yeah that volume knob they make for them long time deck an dem

New deck now you just hadda turn it all de way up and you set

x2. nowadyz deck does make thing real easy

ward one

heres my noob question for the experienced DD users.. will d 9500 series subs take 4000rms playing music for long periods or would i damage them :oops: my system is built to play long when i liming not 'demo' i will be doing this power upgrade at my risk cuz my installer has 2 minds bout it i know ...

ward one

thanks guys.

ward one

i have used both of the amps listed above. none of which can play 4 10's properly. maybe 4 8" bt not 4 10's. just look at the fuse rating- 120 amps on the hifonics and 200 amps for the lanzar. look in the the us amps and the old skool ppi's these amps have been tried and tested to work for this...

ward one

where is barely legal located? and a contact for aleem ??

thanks in advance for all your help

ward one

shake d livin wake d dead wrote:no 10MD26 no care...nice info from ward one.

thanks man. and yup b&c i will rate very closely to the faital pro. very very nice speaker (b&c is a little louder) bt the faital is a little lower.

ward one

i have used all of the big brands in the past. like smr said. all the speaker shine in different aspects. RCF l10yk750- nice all-round speaker, good low mids and midbass yet still being loud! Das 10b- heavy midbass, very loud as well. 18 sound 10m600- one of the louder 10's bt not much midbass faita...

ward one

i will say use a 200 amp isolator and 250 amp fuses on 0awg wiring between batteries

ward one

what 2 batteries are you using? also what size wiring are u linking the batteries with?

ward one

DjDaniel wrote:Yes, they protect them from Low Frequency damage. If you already have a crossover then I dont think It will be necessary, but for good measure I still put mine (just in case).

x2. prevention is better than cure! for that small driver your should put 1.

ward one

asoogrim wrote:is there any use for the crossover also?

yes i forgot to include it. it should be connected in between preamp and amps. wired front to front, rear to rear and sub to sub.

ward one

it have 2 amps but u know the preamp out put front / rear and sub i'm just using front and sub to a 2 channel system output i did some research im missin a 6sx and a eqs if i was running this system i would hav used a different method. use the 2ch amp on the 10's, a 4 channels on the tweeters and d...

ward one

nhbk wrote:Nobody could fix a bun down stetsom? :/ or anyone has Rohit number?

rohit-373-9849, tell him kyle gave u the number. he go handle u up nice

ward one

ok guys, i got a small 4 channel for the highs so the equipment i got re as follows soundstream 8310nrbt head unit clarion pre amp epi160 - if needed soundstream 3-way crossover-if needed Bass line - crossfire vr 1000d (thinking of using a single sa8-v2 or a pair of jbg gto 12"(450 rm each) Mi...