Forums

Esharcangel

I would like to know as well........ at least once a week I call a few places on the listing on the MOWT website and every week is the same story....they are waiting on approval call back next week. I heard they made an announcement on the news sometime this week about 15 stations being granted appr...

Esharcangel

Thanks a lot guys. Will purchase as well. does the gearbox use the same specs? and how much quarts will fill the gearbox? also I looked at the hex nuts which seals the diff and gear box, anyone knows what size hex key I need to get to open? and last question, what did you guys use to refill the diff...

Esharcangel

I have a question for you guys. I have a D22 QD32, doing 250K. Recently I started hearing a clunk noise in my diff when slowly pulling off turning right. I am seeing from the trend some of you guys changed fluids, to be honest since I had the vehicle I never changed fluids in the front or rear diff ...

Esharcangel

Good Day Tuners, Depending on the help of you guys with experience. Two weeks ago I did a full replacement of my Frontier suspension, Front & Back, All rear bushings from Massy, complete top cradle from massy, lower ball joints 555, steering ends 555, stabilizer bar and links poly-bushings. only...

Esharcangel

To check if pistons and connecting rod bearings are good u have to remove each one and inspect. Did he split up the block? Cuz to me it sounds like a piston damage or a piston ring broken. U can do a compression test in each piston chamer to ensure all are firing correctly. White smoke is usually oi...

Esharcangel

An update to my problem....i changed out the fuel filter and i buy a fuel medic deisel treatment....and believe it..... i got a huge improvement....
But i still want to drain the fuel tank just to clean it out also

Esharcangel

Hmmm....thats good advice. I guess the only way to really check that is to replace them. Wonder if the ployutherene will be better?

Esharcangel

Thanks alot. Will definitely do and see what result i get.

Esharcangel

Good Day Tuner, I got an issue with my deisel engine. QD32. Of lately when i start the van, the engine idles very vigorous and rough....not like the normal vibrations of a deisel engine. The front of the vehice.....bumper, fog lights, grill shakes alot. I checked the engine mounts.....in perfect con...

Esharcangel

Droppd the gear box.....apprently it was the pilot bearing...the bearing was bad, so when the shaft which connects the gearbox to the engine connects pilot bearing it was knocking due tothe bad bearing. the release bearing was actually in pretty good condition. I guess for the future it will be help...

Esharcangel

Hey guys,

i got a problem with my QD32 4x4 gearbox....

while idling i'm hearing a knocking, dont matter what range the 4x4 gear is in...however when i press down the clutch the knocking stops...when i release it stats again...

any ideas? or this ever happen to anyone?

thanks.

Esharcangel

Hey Tuners, I'm doing a small mod on my Fronteir (QD32 4x4). Lifting by 2.5" in Front & 2" rear. The Kit has all contents and uses all original suspension parts, however i'm still considering changing some suspension parts. I need front & rear shock absorbers which are compatable w...

Esharcangel

What's the best body of oil to use forthe QD32. Currently using Castrol 15 40w.
Wondering if to use a straight body now?
Any suggestions?
Van's doing 120000km

Esharcangel

Thanks for the info guys. It seems i'll have to do some shoping around and some research. May change of to the Sailun Brand (heard some good reviews) or the Maxxis as kamakazi mentioned.
And start looking for a better job !!!

Thanks alot

Esharcangel

Good Day Tuners, Need some advice. I bought a Frontier roughly 8 months now, got it with Perilli Scorpions 265/70/16 (new brand 2 wks old). I drive roughly 160km a day, with averagely 60km on winding roads. Anyone who knows east well and knows how to go to Biche through the Forest reserve will know ...

Esharcangel

Honestly the rebuild a little sketchy....i had a yd25 before and rebuild on 273000 km, with all original parts....it didnt last to long...about 8months to be exact....changed off parts again...4months after same thing...switched to a qd32 and box and sold the van...bought an original qd32 4x4 .....w...

Esharcangel

Thanks alot.

Was worried if was anything that needed checking out.

Esharcangel

Goodday Tuners, Recently bought a QD32 4x4. I dont use the 4wheel that much, unless going to garden when the rain falls, or hitting a river or beach. Its the model where i need to lock the wheel from the outside before engaging the 4x4. I engaged the 4x4 yesterday, as i try to use it at least twice ...

Esharcangel

Think i gotta do an engine change.

Heard the QD32 is a die hard engine.

Heard they are kinda expensive though.

Anyone knows where i can get an Engine (Engine Alone) at a reasonable price?

Thanks.

Esharcangel

@trini44 it's gonna be roughly around 12k, I'm closing in to that figure myself right now. @ruffrider27, even though it's an upgrade to the D22 version of the YD25 engine, it's still a new engine and nevertheless i think it's time for mechanics to learn about these engines, i'm doing a rebuild now, ...

Esharcangel

Hey Tuners, So I have a serious question about this YD25 Engine, which is both in the D22 Frontier & D40 Navara. Everyone keeps running from the YD25 engine, everyone you ask, they say the YD25 engine is the most troublesome of all Nissan Diesel Engines. I'm doing a rebuilt on my YD25, but every...

Esharcangel

Hey tuners,

Looking for someone reasonable and knowledgable to re-time my YD25 engine.

I did a rebuilt, but the timing seems to be a lil off, the engine is idling fast, and not getting the output as before.

Thanks

Esharcangel

Hey bro, i was having compression problems. My engine was back pressuring. You can checked your engine for back pressure, just open your oil cover while the engine is idling and if there is white smoke spittign out, your're back pressuring for sure. I'm carrying mines in on Monday to do a rebuild (a...

Esharcangel

@Droppa, checked Jerry's and got an opinion. Great Knowledge, good opinion, he told me about the compression test and what not. Need to check my financing before making my decision, his pricing is "competitive", he said around $8000-$10,000. @Lighthammer and 14lover, i did alot of reading ...

Esharcangel

Hey Tuners, Looking for a good deisel mechanic to do a rebuild on my YD25 engine. I got it checked out by two guys and they told me it's back pressuring. Anyone knows of any test i can do personally to check that out? Someone told me there is a hose on the top of the engine going to the intake, they...

Esharcangel

Contact #

Interested in the A/C compressor.

Esharcangel

Hey Turners, I'm having a problem with my YD25 Turbo. Recently i saw some oil seeping out of the intake and the intercooler. I took down the intercooler and piping system to check if oil is coming up through the air filter, but no oil there. I then used some degreaser and cleaned out the piping, int...

Esharcangel

According to Lighthammer, that really hard to get, since N&M stop bringing fully loaded Frontiers, they stopped shipping in those, alot of ppl going with the aftermarket chrome piping. I have one of the original visors myself on my Frontier, wanted a new one since mines, the clips were getting l...

Esharcangel

Hey Zedx20, The qd32 engine is pretty common, and alot of deisel owers convert to this engine when there original engines are burnt out. so i believe you can try the bamboo, cause some of those businesses bring in the qd32 engine for sale used. if not, try ROC in the bamboo as well. A1 auto right of...

Esharcangel

I saw this unit leaking oil. Which is it? Can it be part of the problem, if not the entire problem? Can it be repaired, or do i have to replace? And what other problem will it cause?