Forums

rodney117

Good day just wanted to get some info I’m currently thinking about buying a forester sg5 model that’s have a ej20 naturally aspirated engine in it My question is how easy is Parts to get for this model forester and a lot of individuals keep telling me that these vehicles gas consumption is high and ...

rodney117

http://www.trinituner.com/v3/forums/viewtopic.php?f=6&t=531289&p=7451658#p7451658 just click there

rodney117

guys can someone tell me where i can get a radiator cap for my engine thanks
got a feeling is the cap

rodney117

ok guys so here is the deal it seems that the pump is good the units are good also one thing i notice is that the coolant is fulling up in the bottle not by much a little, an the radiator is taking alot of water much more than what is going to the bottle.

rodney117

1 remove the rad cap with car cold , start and watch the water flow in the rad . If it is slow could be your water pump. Do you use water or coolant ? 2. check the water temp sending units Well ever since i bought the car it had coolant it look like coolant mix with water thoo brownish green cyar r...

rodney117

hey guys hears the deal well i got my engine sorted out with the sputter probem another problem has arise today when the car is idling the temperature gauge going up like really high below H a little (i know that is high lol) anyways if I drive a short distance like 50 ft an thing the temperature go...

rodney117

ok guys just wanted to let u all know that the problem was solved it was the distributor
thanks alot guys

rodney117

ok guys this thing seems to be getting worst today i was driving up the creek to san fernando about 70 km about 2500 rpm an the car started to sputter rite there an then it happend for about 5 sec then stop when i reach la romain driving about 40km thru traffic the rpm went from about 1800 to flat 0...

rodney117

red_dragon wrote:Since u have parts to swap try and get a distributor to try

trying to get one rite now but not getting any dont wanna buy one an then its not the problem

rodney117

JJ16 wrote:It could be as simple as a sensor, ECU, electrical problem etc.

The only thing to solve this, or the best thing is the process of elimination

ok so I tried a new ecu today an same problem even put my ecu in a friends car an it work perfectly

rodney117

ok so one of my friends take a look at it today he is a kinda mechanic he know he ting i guess anyhow when he press the gas pedal even on neutral the car did it maybe i didnt press hard enough or sm but he said that it sounds like a rev limiter [war dat be?]. The car did not keep building in rpm whe...

rodney117

any carbuerator guys out there
viewtopic.php?f=6&t=504135
will post photos soon
Thanks.

rodney117

^^ thats why i gave him the correct figures about, anyone can do it...its a DIY process..just buy a multimeter, you would spend the same amount but this time you'd acquire the actual tool 2 do it next time However, a bad TPS is suppose 2 give a checklight btw..as well as the map sensor... i suppose...

rodney117

ok so fuel filter good fuel pressure good I was talking to a mechanic today an he said that it can be a current problem OR AN GUYS I FORGOT TO MENTIONED SOMETHING RITE BEFORE THE CAR STARTS TO SPUTTER THE RPM GUAGE WILL START TO MOVE UP AN DOWN CRAZY STAYING CLOSE TO THE RPM THAT THE ENGINE IS IN bu...

rodney117

thanks for all ur replys guys well im from Siparia, ok so i tried my friends dizzy but still no luck plugs are new iradium sm sm idk the specs wat not new plug wires were also bought some time ago i think im gonna run a scan in the morning idk wats the icm nor the tps if anyone can help some other p...

rodney117

Run a diagnostic first to ensure its no sensor. The cause for the vtec to act up like this is because the oil isn't thin enough to actually engage the vtec. This will eventually damage it. Please stick to the factory recommended oil and not trini machanic recommended..lol. the manufacturer recommen...

rodney117

10w 30 or 10w 40 is required. Remember that is a high performance engine. The factory recommended is 5w 30. Amsoil will surely do the trick. However, you should run a diagnostic first; if there are no error codes showing up, then you know is the oil. I know amsoil is a bit costly but this oil will ...

rodney117

Most likely this sounds like the oil you're using isn't able to activate the vtec. Amsoil or shell is required for this application. Sent from my GT-I8190 using TriniTuner mobile app when the car is on park or netural the vtec works also if i sink the gas on drive it works sputtering starts from ab...

rodney117

ok so here is the deal I bought a civic which has a b16 A motor an transmission Problem is when I am driving probably about 2000 rpm or so the cars starts to sputter drastic lost of power the vtec wont kick unless i sink the gas pedal right down an even when the vtec kick the car stills sputter an n...

rodney117

fellas take a look viewtopic.php?f=55&p=7056048#p7056048

time to upgrage got to sell

rodney117

talking to a random fella today about high temperature paint... we start talking...apparently he have 2 E15 turbo engines home full conversion ...and an extra head and block.. he wah put it in he b11 sunny, but say the carby workkin top ah de line and he wah leave it original..so he might sell the ...

rodney117

black start wrote:^padna supposed to have a manifold. Will call him and find out what price he wants for it.

thanks alot man

rodney117

yo fellas was up I looking for some parts i dont know if any one ah all yuh know where i could find them
LF Turbo manifold for the e15
LF extractors for the e15 preferably 4,2,1

any one dont know the e15 engine is the carbuerated 8valve that came in the b12 an b11

Thanks alot

rodney117

fellas allyuh know any where i can get a nismo grill for my car?

rodney117

black start wrote:^you sort out the brakes rodney?

nah bro not yet reeel busy these days but will do soon

rodney117

yea it is a e15 and it is a carb BTW skylinechild that is the correct oil pump

rodney117

might.... and u might pay a kings ransom for it too! lol king ransom is joke i paid 300 for a oil pump today :shock: concept hold your hand on the mudguard as yet meh padna had some up untill the last time i check him which was last thursday an yuh mite pay like 75 for 1 this is the original mudgua...

rodney117

hey guys if anyone looking for b12 parts there is a guy in debe that has lots of stuff his price may be a little hot but he got it u can contact him I know him by "pit" #647-7869 he even got the original door visors

rodney117

thanks guys for all the help BTW can u guys also tell me what other cars does the ad22vf brake come on also i went in the bamboo an they like wah d hell i taking bout an also which pulsar model n 14 or n 15 also which engine he ask sr or ga dont know what dat got to do with it lol and will my orgina...

rodney117

rodney117, b14, ad18v and 22vf direct replacement. bolt for bolt! pm user black start ,he has a set of ad18v's for sale. WAW guys thanks for such fast replys BTW can u tell me where does the 22vf come from well i guess the ad18v is from the ad wagon lol kiran can u send me a pm with ur # an locatio...