TriniTuner.com  |  Latest Event:  

Forums

Search found 2926 matches

by Lance
November 9th, 2019, 9:10 pm
Forum: Ole talk and more Ole talk
Topic: Want to know black pudding
Replies: 31
Views: 1920

Re: Want to know black pudding

He's located on a street just after the golden grove prison in arouca. Well that was the last i know of.
MaxPower wrote:Chinee man that used to sell in St Helena...

Believe he move some where in Arouca.

East ppl should know
by Lance
October 6th, 2019, 8:25 am
Forum: NISSAN
Topic: Water pooling on B14 driver floor
Replies: 3
Views: 447

Re: Water pooling on B14 driver floor

I had this hunch initially. But I checked it out.

Everything seems good from this end.
by Lance
October 5th, 2019, 10:44 pm
Forum: NISSAN
Topic: Water pooling on B14 driver floor
Replies: 3
Views: 447

Water pooling on B14 driver floor

Anyone ever had issues with water pooling on the driver side floor? Only happens when rain falls. I initially assumed it was the rubber on the door itself, but I recently changed the doors and the problem is still there. It seems like it's coming down the A-pillar and draining down by the kick panel...
by Lance
August 22nd, 2019, 7:52 am
Forum: Ole talk and more Ole talk
Topic: What's on the menu this Sunday?
Replies: 3289
Views: 224678

Re: What's on the menu this Sunday?

Barbecue / Grill Mahi Mahi . Garlic mashed potatoes . Spicy sweet potatoes with cinnamon sprinkles. Boil corn and boil green fig salad in indonesian spiced sauce . Medium done Red Rib Eye cutlets with mushroom gravy and tambrind sauce with fresh bird pepper. Fattoush salad. Sangria . Corona . And c...
by Lance
August 13th, 2019, 8:32 pm
Forum: Ole talk and more Ole talk
Topic: OFFICIAL "Local CLEAN AF" ChEd...
Replies: 4436
Views: 605543

Re: OFFICIAL "Local CLEAN AF" ChEd...

The 400r GTR kit looks epic!
by Lance
June 10th, 2019, 10:45 am
Forum: Ole talk and more Ole talk
Topic: Building a house in Trinidad
Replies: 2300
Views: 349789

Re: Building a house in Trinidad

I have a situation here and I was wondering if anyone had some experience that they would like to share. My dad had an approved plan for a 2 story dwelling home that he began to construct. The structure was built to plan up until the decking and steps were casted. However, he then realized that he w...
by Lance
May 26th, 2019, 6:51 pm
Forum: NISSAN
Topic: B14 powered window installation
Replies: 3
Views: 872

Re: B14 powered window installation

Just had a look. The holes and rubber grommets are there. But no harness unfortunately. I'm refurbishing my dad's old b14. It was an Fe so the doors were not powered. I recently bought a set of powered doors and I now need a good electrician to wire them up without doing a hack job. Anyone know some...
by Lance
May 26th, 2019, 12:53 pm
Forum: NISSAN
Topic: B14 powered window installation
Replies: 3
Views: 872

B14 powered window installation

I'm refurbishing my dad's old b14. It was an Fe so the doors were not powered.

I recently bought a set of powered doors and I now need a good electrician to wire them up without doing a hack job.

Anyone know someone that has done this before?
by Lance
May 18th, 2019, 2:44 pm
Forum: Ole talk and more Ole talk
Topic: Building a house in Trinidad
Replies: 2300
Views: 349789

Re: Building a house in Trinidad

This was my concern, but we're already about 6 feet down in the new soakaway and we're now experiencing the seepage. The drain from the old soakaway will be diverted to the new one so the old one will no longer be in service so I'm not concerned about future seepage. I'm thinking that my biggest iss...
by Lance
May 18th, 2019, 2:21 pm
Forum: Ole talk and more Ole talk
Topic: Building a house in Trinidad
Replies: 2300
Views: 349789

Re: Building a house in Trinidad

I thought it was you!

With the base casted, it's probably designed to operate differently from a traditional soakaway. I'm guessing that's why you have the rubble drain after the soakaway tank.
by Lance
May 18th, 2019, 2:00 pm
Forum: Ole talk and more Ole talk
Topic: Building a house in Trinidad
Replies: 2300
Views: 349789

Re: Building a house in Trinidad

I'm currently We had put it when we changed our roof sheeting a long time ago, Can't say yes or no, but I think it helped slightly. A well vented ceiling is recommended in general The best thing they say is to install ceiling exhaust fans to move the hot air out of the ceiling. Nice long rubble drai...
by Lance
May 6th, 2019, 6:46 pm
Forum: Ole talk and more Ole talk
Topic: CO2 Mig Welder
Replies: 42
Views: 3782

Re: CO2 Mig Welder

I'll take some shots of the next project. Current mocking it up now.

Some Subaru headers using 304 Stainless.
IMG_20190504_180211.jpeg
IMG_20190504_180036.jpeg
IMG_20190504_180121.jpeg
IMG_20190504_183309_169.jpeg
by Lance
April 24th, 2019, 11:36 am
Forum: Ole talk and more Ole talk
Topic: OFFICIAL "Local CLEAN AF" ChEd...
Replies: 4436
Views: 605543

Re: OFFICAL "Local CLEAN AF" ChEd...

I don't think the second photo is the same car. That's his brother's own.
by Lance
April 5th, 2019, 8:07 am
Forum: Ole talk and more Ole talk
Topic: CO2 Mig Welder
Replies: 42
Views: 3782

Re: CO2 Mig Welder

Yeah I think this is the main deciding factor. It really depends on how often you intend to refill. I do quite a bit of stainless steel Tig welding. With a large furick cup I flow about 20-22 cfh and then another 4-5 cfh for back purging. I eat through gas like crazy. Probably some time down the roa...
by Lance
April 4th, 2019, 8:42 pm
Forum: Ole talk and more Ole talk
Topic: CO2 Mig Welder
Replies: 42
Views: 3782

Re: CO2 Mig Welder

I thought the same thing and went ahead and bought a 110cf argon tank. But the issue is one of downtime. If you purchase your bottle then you need to drop it off at couva or aranguez and wait 5-7days before you get it back. With a rented tank you can just drop off and collect another one and be on y...
by Lance
April 1st, 2019, 5:10 pm
Forum: Ole talk and more Ole talk
Topic: CO2 Mig Welder
Replies: 42
Views: 3782

Re: CO2 Mig Welder

Bumping this post.

I'm looking for a 220cf Tank with a CGA580 Valve and a 3AA2015 rating.

Massy Gas is on backorder until probably next two months
by Lance
November 6th, 2018, 9:39 am
Forum: SUBARU
Topic: The Tuning Thread- EJ Motor
Replies: 658
Views: 93548

Re: The Tuning Thread- EJ Motor

Assuming that Jason still holds a license as well?
by Lance
October 30th, 2018, 6:51 pm
Forum: Ole talk and more Ole talk
Topic: :: The official TOOLS thread ::
Replies: 5375
Views: 398371

Re: :: The official TOOLS thread ::

Razorweld is an Australian marketed brand that's made by a Chinese company called JASIC.

They do quite a bit of OEM for many companies (including CK worldwide).

The machines are supposed to be decent.
by Lance
October 28th, 2018, 3:49 pm
Forum: Ole talk and more Ole talk
Topic: :: The official TOOLS thread ::
Replies: 5375
Views: 398371

Re: :: The official TOOLS thread ::

Hobart has a decent budget mig Was looking at the hobart 190 mig for us$ 677 its a 220v. Looks like a well built US made machine Might cost 6-7k landed, not sure i want to put out that much as a learner/weekend warrior https://www.amazon.com/Hobart-500554-Handler-Welder-230V/dp/B005CNOVZU/ref=sr_1_...
by Lance
October 27th, 2018, 7:08 pm
Forum: Ole talk and more Ole talk
Topic: :: The official TOOLS thread ::
Replies: 5375
Views: 398371

Re: :: The official TOOLS thread ::

Hobart has a decent budget mig
by Lance
October 27th, 2018, 3:16 pm
Forum: SUBARU
Topic: The Tuning Thread- EJ Motor
Replies: 658
Views: 93548

Re: The Tuning Thread- EJ Motor

nervewrecker wrote:Dont they have unlocked ecu's?



I think he means that opensource tuning doesn't support this ECU. ECUTEK does
by Lance
October 27th, 2018, 3:14 pm
Forum: SUBARU
Topic: The Tuning Thread- EJ Motor
Replies: 658
Views: 93548

Re: The Tuning Thread- EJ Motor

The fine learning knock control only drops below zero under wot 4300-5800 rpm.. under normal driving it's zero.. I more or less understand how the iam works in conjunction with knock control.. so in theory a retune should fix it? IAM IS a knock control strategy (along with fine learning and feedbac...
by Lance
October 23rd, 2018, 7:46 am
Forum: Ole talk and more Ole talk
Topic: Wtk: any water truck owners/drivers available
Replies: 102
Views: 8805

Re: Wtk: any water truck owners/drivers available

Bumping this thread for more info.

No water in arima going on 6 days now. Called WASA for a truck supply and they basically said 3-5 days and no guarantee of that either.
by Lance
September 22nd, 2018, 7:51 am
Forum: Ole talk and more Ole talk
Topic: WallerField Race Track shutdown? UPDATE: TTASA acquires Wallerfield permanently!!!!!
Replies: 95
Views: 13989

Re: WallerField Race Track shutdown? UPDATE: TTASA acquires Wallerfield permanently!!!!!

Not really they must have had plans for the future development already and will just need a little tweaking now based on the layout adjustments laid down by etek You would know better than me from the perspective of the plans that have already been tabled. Its just that ole talk in the pits, copiou...
by Lance
September 21st, 2018, 7:29 pm
Forum: Ole talk and more Ole talk
Topic: WallerField Race Track shutdown? UPDATE: TTASA acquires Wallerfield permanently!!!!!
Replies: 95
Views: 13989

Re: WallerField Race Track shutdown? UPDATE: TTASA acquires Wallerfield permanently!!!!!

Two weeks to produce a comprehensive strategic plan is quite tight.
by Lance
July 1st, 2018, 4:10 pm
Forum: Ole talk and more Ole talk
Topic: WTK - 3D Printing
Replies: 11
Views: 1203

Re: WTK - 3D Printing

what do you need printed? Do you have the STL file?
by Lance
June 6th, 2018, 8:28 am
Forum: Ole talk and more Ole talk
Topic: Cheap and smelly leg and thigh chicken quarters
Replies: 191
Views: 6096

Re: Agriculture Minister: US imported chicken costs just US$0.09/lb and is inferior

Just another thing to tax. Have nothing to do with quality. Clarence Rambharat probably has some lobby group behind him to do that. This is basically the same tune that Robin Phillips and Desmond Ali have been singing for years (without providing any empirical evidence to support the claim). Both r...
by Lance
May 29th, 2018, 1:20 pm
Forum: Ole talk and more Ole talk
Topic: :: The official TOOLS thread ::
Replies: 5375
Views: 398371

Re: :: The official TOOLS thread ::

pugboy wrote:I have a new 14/18 if u need in emergency

Lance wrote:where in the east has 44 7/8'' bandsaw blades (18 TPI)? Checked bhagwansinghs, but nothing in that size. Only the 35'' size in stock.


Thanks man,

I appreciate the offer.

I just sent PM
by Lance
May 29th, 2018, 8:24 am
Forum: Ole talk and more Ole talk
Topic: :: The official TOOLS thread ::
Replies: 5375
Views: 398371

Re: :: The official TOOLS thread ::

where in the east has 44 7/8'' bandsaw blades (18 TPI)? Checked bhagwansinghs, but nothing in that size. Only the 35'' size in stock.
by Lance
May 7th, 2018, 5:58 am
Forum: SUBARU
Topic: The Tuning Thread- EJ Motor
Replies: 658
Views: 93548

Re: The Tuning Thread- EJ Motor

When OE manufacturers sell products (replacements) that they also manufacture for the OEM, there are usually minor differences. This is usually down to contractual agreements with the car manufacturers. For instance, EXEDY does the OEM clutch setup for the WRX, but the KSB03 OE Replacement that EXED...

Go to advanced search