well i brought the car to a Nissan dealership to get it diagnose and the computer said it was the air flow meter and the knock sensor that is bad. the TPS didn't give any signal, I though someone said that when the air flow meter was bad that the car would produce black smoke when revved ? mine dose't
i believe its the TPS or MAF.... but in your case its prolly the MAF and check the jack.... is there anyway to check the jack to see. but if i pressed it gradually, it would. MAF usually causes alot of blacksmoking. some how i think its the tps cause i am not having any black smoke, also once the c...
well i dont mean to hijack your thread but i need some help too i made a mistake on the rpm where the car breaks up its from 1k to 2k rpm, like there is a flat spot but the car revs out clean from 2k upwards. i am useing bkr6 plugs which i know is stock for the sr20det, there is no smoke when i rev ...
i also have a similar proble to this, my car is boosting but there is a flat spot between 2K rpm and 3k then it revs clean, the car dosent idel when just started but after a little drive it may idel sometimes it searches do you guys think TPS could be the cause ?
do you guys by chance known what intercooler kit will work on a stock turbo b13. like what bend are needed to run the intercooler piping and so on. i am in the process of buying an intercooler set up on ebay but i am unsure of what bends i need any pics you have intercooler setups on a b13 will be o...
-------------------------------------------------------------------------------- yea people its me again cant believe not touched this ched since 2007 well i am back with some gear box woes don't know why i dose see so much trouble but here goes i sold my other project (sr20de+gearbox) got a new pro...
ok so all i have to get is the clutch arm from a ga16box or sr20box(that came cable)
and why dosent my left side mount fit on to the box (car came originaly with sr18 auto) to me all the left side trannie and gear box mounts look the same in the b13
yea people its me again cant believe not touched this ched since 2007 well i am back with some gear box woes don't know why i dose see so much trouble but here goes i sold my other project (sr20de+gearbox) got a new project this year sr20det+gearbox but the gearbox i got is hydraulic i think plus my...
Check Tsc on the froum he sell Megan drop springs for the b13 1100.00tt. pluse they ride great especial if mated with some kyb shocks gr2 or excel G but the gr2 are better
Big Z u good boi how you find that ? ok so it either i cut my shaft and shorten it back or there is one of thoses mamimas close around the V6 2.0 wonder if the halfshaft will work the only thing is the owner still useses it. what u think BigZ should i cut it and shorten it back to its original length?
Can someone please tell me what to do should i just try and get back my original halfshaft and try one of these
to make the shaft go closer to the box to make up for the length ?
thanks for the help Bigz but the only thing i understand so far is the difference bitween the Lsd and Non-lsd axcles. My box came off a bluebird U13 so i dont think it is the same as the b14 and b15 boxes. the B14 box the one with the fins looks like the one on th p11 most of those axcles look like ...
http://img267.imageshack.us/img267/1194/trucks015py3.th.jpg http://img152.imageshack.us/img152/4163/trucks019or3.th.jpg http://img152.imageshack.us/img152/6987/halfshaftzr1.th.jpg the halfshaft on the to is the original for the gear box it is 27 spline (and i lengthened it to the length of the gree...
Ok tuners here is my predicamenti have a Sr box that came off a Bluebird with a Sr18 engine the halfshaft that i got with it has 27 splines and is 17 3/4 in. when i bolted up the box the halfshaft appeared to be too short by about 2inches and the half shaft that came with the auto is 19 3/4 inches a...