Forums

cjawahir

Look through the intake from on top with a bright light

cjawahir

between the crankcase and engine block intake side , close to engine mount .

cj

cjawahir

Death-Row,alot can be told about a mechanic's work by lookin at his garage.

not always true , this is why big garage look smart but you only need one good man with a brain and a workshop manual to fix your car .

cj

cjawahir

working now .

thanks cj

cjawahir

copper_shot, how can you lock the keys in the car with the glass up .

cj

cjawahir

cjawahir wrote:i have seen his problem in an a32 cefero after an engine change , some thing about the intake manifold .

lets get some more info about the model and the problem started .

cj

this answer was for the brakes problem

cjawahir

i have seen his problem in an a32 cefero after an engine change , some thing about the intake manifold .

lets get some more info about the model and the problem started .

cj

cjawahir

Relay chatter means 1) In a DC circuit as in your car ...the relay IS getting enough juice to pull...BUT as it pulls the current drain of your FOGS are causing the voltage to DROP on the relay coil....causing it to let go..... 2) As it lets go the fogs drain stops and the relay voltage goes up and ...

cjawahir

bargin boi,taking out the plug you can break it , the side way movement off the extension can cause that .

cj

cjawahir

# 163 monroe rd cunupia 671- 8277 , you may need to visit them mostly girls working, so you will have to show them what your looking for .

cj

cjawahir

stanley brand i think its about 25 dollars for one , each spanner comes with two size eg 8mm and 10mm

cjawahir

norstar2k, thanks for the info

cj

cjawahir

yes i know the guy and he can do most mechnical on the vehicle , and if he cant do some thing he will tell you , honest .

the e39 is a good car , less problem than the e46 .

cj

cjawahir

i see the line spanner selling at Kahn's paint shop on Moroe road conupia .

cj

cjawahir

hi , call McIntyre Auto @ 770 0217 , he only repairs BMW

cjawahir

arton, is this the black ecu with two plug or is it the silver ECU with single gray plug ?

and tell me the fault code .

cj

cjawahir

W2J wrote:you guys both realise thoses video's are VIII and IX and NOT X's right

yes i know , but just maybe the ten can do it , its trini .

cj

cjawahir

cjawahir

R. Mutt wrote:Not to burst your bubble...the build looks really nice but most evo X's seem to be making no more than 450 whp on the red atm. Given your cars weight (about 3600 lbs) you are looking at high 11s 1/4 mile times.

x2

cjawahir

hi , do you drive the almera with the big lights at rear ?

if yes then the corolla will feel extra soft to you .

The corolla steering will get stiffer as you go up in speed , honda civic E steering is also soft .

cj

cjawahir

plain and simple you have water in the air flow meter the spluttering is from too much fuel, too much fuel is from water on the hot wire in the afm and its sending a signal to the comp that its getting lots of cold air take air filter off and blow out with compressed air or put a hair dryer on it t...

cjawahir

300 to scan or does that include changing the sensor , and dont waste you money on a cheap scanner .

if you have three nissan almera wont it be easy to swap sensors ?

buying a scanner wont save you money , finding a good technician will.

cj

cjawahir

nissan heavy truck have a setup like that, to switch off and on the diesel pump .

what about a simple vacuum actuator , you can use a solonoid to control vacuum.

cj

cjawahir

i saw it on a b14 and the man always changing the connectors, think about it, a total of about 90w on for a long time will cause it to overheat.

but if for a short time only may get away with it .

cj

cjawahir

[quote="D_bodyguard"] what i want to do is get the LB and HB on when i call for the HB

this will cause the bulb to overheat and melt the connector .

cj

cjawahir

Anil_Sooknanan , thanks for tying it and learning something , I know the transmission have speed sensor , BUT NO SPEDOMETER SENSOR. Anil_Sooknanan , once you are willing to try new things you will learn , I teach electronic automotive to shops in miami , and there is always something new to learn ....

cjawahir

QG , all electronic transmission carry speed sensor. Nissan e- throttle have no spedometer sensor for the cluster, from the transmission. but have speed sensor for the transmission brain to change the gears . all spedometer sensor is located near the output shaft, the e-throttle dont have it . I am...

cjawahir

the QG trannys have 2 speed sensors one which everyone knows of and the other to the wire wall side. some tranny only uses the on by the fire wall it all depends on the TCM the car has not on if it's E-trottle or not. some of the Wingroad's (Rider) with the cable type QG came with this. the types t...

cjawahir

if Anil say so fellas....is so.....cause he real flippin good with the Nissan vehicles dem......he know the engine and tranny and diagnostics inside out.......on another note, i have a QG18 NEODi with CVT tranny, 2 speed sensors and stepper motor. Took out from P11 wagon to put in ah SR20. I want 2...

cjawahir

dont have the part number , thanks for the reply .

cj

Forums

Search found 200 matches

Re: A relay hookup question!!