Forums

3stagevtec

What is the average cost per pound of N2O?

3stagevtec

Check the reviews from Amazon on the unit.. for the price, the risk seems well worth it for those on a tight budget. The 2000W Honda equivalent sells for around $8000 IIRC. The Yamaha dealer has a 1000W model (ET1) for $2100 and a 2600W model for $5700. Call to confirm prices (contact 623-1221). I'd...

3stagevtec

Nice comparison!

3stagevtec

Was planning to do that next. Free time for me this week is VERY limited, but as soon as I check the other inputs I'll let you know. This is what I did today.. Unplugged all inputs to the mixer after the noise started = noise continued Unplugged the mixer output = noise went away I am planning to mo...

3stagevtec

My Mackie Mixer ProFX4-V2 is responsible for the noise. When I switched it off, leaving the Driverack PA+ on, the noise went away. Unplugging the source unit from the mixer made no difference also. Think it would be possible for a local electrician to repair such an issue or would be it best to just...

3stagevtec

Driverack PA+ problem. Everytime the unit warms up, it starts giving the weird output. The noise only comes from the Driverack, I had the source unit switched off while recording. The mixer is not at fault because the noise goes away once I power down the Driverack.. if i let the unit cool for a wh...

3stagevtec

10154186595106084 https://www.facebook.com/rene.roberts.754/videos/10154186595106084/ Driverack PA+ problem. Everytime the unit warms up, it starts giving the weird output. The noise only comes from the Driverack, I had the source unit switched off while recording. The mixer is not at fault because...

3stagevtec

How the driver of the Swift doing?

3stagevtec

lool Roti No i cant do that and what going on with that @lAudi guy who died and made you Steven Spielberg >:( !!!! you just hating hull your ass ... :) @ everyone else thanks for viewing and your Comments The one piece of constructive criticism and this is your response.. best you stick to modellin...

3stagevtec

all results can be found here https://speedhive.mylaps.com/Events/1293054 Thanks! Can someone please confirm what is the typical max speed achieved at the end of the main straight at Wallerfield? Looking at the results from the SS Event, I am seeing a 'Best Speed' in the 100 - 120km/h range. I am g...

3stagevtec

Have to repeat how glad I am they got the car off her so quickly. Her injuries sound severe though, hope she has a successful recovery.

3stagevtec

It's good to see the quick thinking by onlookers to get the car off the spectators it landed on. That fast response could have saved their lives. So sad to see this happen though, I know motor racing is growing slowing in Trinidad and gaining further public acceptance. Hope this does not set it back

3stagevtec

dID THE MECHANIC SET BACK THE TIMING CORRECTLY? (damn caps lock!) If they missed on the timing, power would be off and the engine would run poorly

3stagevtec

FullStop wrote:Be careful when you're changing spark plugs in future if this is the model with the ecu on top of the engine.

Of all the places to put it!

3stagevtec

Many thanks for all the suggestions and help, got through with the problem yesterday.. A 3rd mechanic came and had a look, his scan tool also showed no trouble codes etc, but while driving and watching the live data, the car died totally on us and the brain was not visible to the scan tool at that p...

3stagevtec

Satire at its finest..

3stagevtec

Sensors have a Mitsubishi stamp or were original Mazda? I've encountered aftermarket knock sensors that don't throw codes but don't function at all The original and ones I purchased all were Mitsubishi.. I have NOT changed or tried the knock sensor as yet and was told that could also be responsible...

3stagevtec

FullStop wrote:Did you per chance purchase used sensors?

New for the both I tried. I also made sure the wiring was properly plugged in before attempting to restart engine.

3stagevtec

this sounding like fuel pump malfunctioning or a harness is shorting or heating up to much & cutting the current happend to my mazda 3 recently same exact problem & the computer never picked up the fault . call george in arima 360-5678 he will definitely find that problem the man is a boss ...

3stagevtec

I believe ur maf is the problem start with cleaning it and checking it's connections. If it's bad u will still get the stalling but after a longer period of time. This is cuz it wud be measuring air better than before but still outside parameters. Especially if it's a hotwire maf. When the car shut...

3stagevtec

If no electrician, a recommendation for a good mechanic capable of excellent fault finding skills.

3stagevtec

In need of some assistance, have a Demio DY and a few days ago it just started randomly shutting down on me while driving. I changed both cam and crank sensors in an attempt to find the problem none fixed it. Now it shuts down after driving for a 10mins or so, and will refuse to start back until coo...

3stagevtec

In need of some assistance, have a Demio DY and a few days ago it just started randomly shutting down on me while driving. I changed both cam and crank sensors in an attempt to find the problem none fixed it. Now it shuts down after driving for a 10mins or so, and will refuse to start back until coo...

3stagevtec

OP u have to help ur self , did u even open d 2 links i posted ? use it & some basic maths to figure out ur box dimensions , dont forget to account for sub\port displacements & thickness of materials especially if ur using mdf as for sealed : depends on what i am feeling for but i have used...

3stagevtec

Aaron 2NR wrote:all results can be found here
https://speedhive.mylaps.com/Events/1293054

Thanks!

3stagevtec

Will results from the various classes be posted online?

3stagevtec

K series

B Series

3stagevtec

ruffneck_12 wrote:huh, you would think with that much suspenshun the Sundown would win the displacement part

That was the part that impressed me the most.. it seems the 4" coil / smaller spider really limits the Sundown the most. The 3" coil ZV4s should be superior in displacement though.