• ONLY Powersellers are allowed to post in this forum. • Negative comments or replies, lowballing or 'sale bashing' are NOT allowed. • Personal ads are FREE. Commercial Ads are not allowed without Powerseller Status • Powerseller status is for users who wish to post many items for sale, new or used. • Even if you do not own a business but would like to post many items for sale, then we require that you pay for Power Seller status. • Users are limited to no more than 2 simultaneous Ads / FS (For Sale) topics per classified forum; powersellers are limited to no more than 4. • Ads that have not been replied to after 180 days will be deleted. • Please click here to view the forum rules
HID Ballasts with built in capacitors for use in European vehicles, new Japanese vehicles (Kia, Hilux, Ford Ranger),or any vehicle that requires a Canbus/Error Free setup to work efficiently and effectively without flickering, cutting off or causing error codes to come across the dashboard. Now you can safely have aftermarket HID lights on your vehicle.
Price: $500 a pair. One month warranty against manufacturer defects.
D series HID bulbs.
-Direct replacements. No modifications needed.
-100% plug and play.
-No error codes/messages/signals.
-OE(Original Equipment) precision and quality for consistent performance.
-Compatible with existing OEM headlamp optics.
-For the European vehicle (Audi, BMW, Mercedes Benz, Volkswagen) owners that want to replace a blown bulb or change the temperature of the headlights to a more stylish and efficient temperature (colour) at an affordable price.
-Plug and play, very easy to install and no modification needed. -Works with all model vehicles (9v-32v). -Solves/corrects error messages on the dash board. -Eliminates HID headlight flickering and shut off. -Solves the computer error warning encountered during the installation and operation of aftermarket HID kits on European vehicles (and some Japanese- Ford, New Mazda BT-50. When a HID kit is installed in newer car models or cars with a computer controlled unit, often there is an error code showing on the dash board or the HID lights keep flickering and would not stay on. This is due to the fact that the HID kit is triggering a bulb out warning signal in your car's computer control unit.
This device is designed to balance out the current draw of the HID kit and would offset the warning signals on the dash board. It will also eliminate HID headlight flickering that is caused by the vehicle's computer not recognizing the low wattage HID bulb.
Installation Instruction: The special wire harness needs to be used with caution: Red wire needs connect to positive ( + ), black connect to negative ( - ). There is a capacitor on this wire harness to by-pass the error message signal and the capacitor is polarity sensitive, so the red and black wires need to be in the correct position. OTHERWISE THE CAPACITOR WILL BE BURNT, NO LONGER BE ABLE TO WORK AND WILL VOID WARRANTY.Please use a voltage meter to make sure the correct polarity before installation.
Cars known to require this are: Audi, BMW, Mercedes Benz, Landrover, Volkswagen (usually late models only).
Can simply be used as an anti-flicker capacitor on Japanese vehicles.
Price: $150 a pair One month warranty against manufacturer defects.
Last edited by BrotherHood on March 7th, 2018, 12:29 am, edited 20 times in total.