trinituner.com

anyone know where i can get a left side rear view mirror for a fa2 2007 civic, the gear to fold the mirror inward strip

guys good day

is the Honda CR-V 2002 RD5 a good buy???
thinking about getting one for i want a bigger vehicle and its reasonable.

tytano wrote:guys good day

is the Honda CR-V 2002 RD5 a good buy???
thinking about getting one for i want a bigger vehicle and its reasonable.

good buy!

Goodnight guys, i'm looking forba es8 subframe..

2001 Honda city thermostat housing needed.

Looking for full left side mirror and housing for Honda city cng 2015

ES8 steering rack need help bushing is bad who can I get this fix by

Please recommend a dealer who will have ECUs etc for the Honda CRV in stock.

Galvatron wrote:Please recommend a dealer who will have ECUs etc for the Honda CRV in stock.

Which generation crv and what motor?

2010 CRV RE2....R2 engine....need engine control module and power steering control module

Galvatron wrote:2010 CRV RE2....R2 engine....need engine control module and power steering control module

You could probably try to get a foreign used but that ecu definitely has an immobilser. The ecu would need to be recoded to work with your existing key

Maybe have to check the firm most likely though

What do you guys/gals recommend for Rear Lower Control Arms (LCA) for an EK civic.

Replacing the bushings (and where did you source them)
or
Replacing the LCA with an aftermarket unit and which ones last
or
Replacing LCA with an aftermarket/original unit from a different vehicle (Type R) arm

or any other suggestion

Reviving an old thread.

Looking for a mechanic who currently works at the firm and does personal jobs.

So back to repairing my old Honda (EK chassis)

I'm a bit lazy sometimes regarding repairs cause some things are harder to do than others.

Replaced Driver side inner cvboot and grease as I could see small cracks forming
Replaced Steering rack dust boots
Charged Front lower control arm bushing
Replaced shock (bump stop) buffer on front shocks
Clocked springs and upper shock mount so that the strut mounts properly
Applied grease and teflon tape to front sway bar, to help keep sway bar bushings from squeaking

NLGI 1 Moly grease aluminium thickener (cause almost everyone sells NLGI 2 only) - Schaeffers from Boodram's in the Bamboo (L&L Bar)
Urethane bumpstops - Purchased a set intended for the rear of a Skoda Octavia and adapted by cutting. Better option than running those cheap rubber dust boots; EKs have metal dust shields

Anyone knows where I can find this Clutch Pedal Stop Pad locally?

https://www.amazon.com/Genuine-46505-SA ... s_li_ss_tl