Page 1 of 1
Dyno Sheets
Posted: June 26th, 2012, 1:33 am
by High_Speed_Imports
Post some of allyuh sheets and setup na. N is not a measuring contest btw
Re: Dyno Sheets
Posted: June 26th, 2012, 11:17 am
by hatch is best
An old sheet
Re: Dyno Sheets
Posted: June 26th, 2012, 4:31 pm
by High_Speed_Imports
error loading pic from link. what motor? and specs
Re: Dyno Sheets
Posted: June 26th, 2012, 4:46 pm
by r3iXmann
ok..hear what
List:
Motor
Mods
Any Images/Dyno Sheet
and we'll neatly construct the post and sticky it
Re: Dyno Sheets
Posted: June 26th, 2012, 5:06 pm
by High_Speed_Imports
if no one does one by today i would go looking for some old sheets.
Re: Dyno Sheets
Posted: June 27th, 2012, 8:06 pm
by hatch is best
Come on guys
type_r_teggy
5onDfloor
hondane
Clerique
Kes vtec
HSI
turbochinee
Re: Dyno Sheets
Posted: June 28th, 2012, 1:26 pm
by JDM_GUY
B16a
ITR cams
CTR exhaust
Headers mugen
Re: Dyno Sheets
Posted: June 29th, 2012, 3:42 am
by High_Speed_Imports
hatch is best wrote:Come on guys
type_r_teggy
5onDfloor
hondane
Clerique
Kes vtec
HSI
turbochinee
looking for my sheets
Re: Dyno Sheets
Posted: July 3rd, 2012, 11:11 am
by turbochinee
hatch is best wrote:Come on guys
type_r_teggy
5onDfloor
hondane
Clerique
Kes vtec
HSI
turbochinee
Will post mine tonight when i reach home.
Re: Dyno Sheets
Posted: July 8th, 2012, 11:19 am
by Clerique
Old setup (2009)
OEM '96 B18C(
R) Bottom end rebuilt with ARP hardware
OEM '96 ITR cams
Skunk2 springs, retainers, cam gears, flat faced valvesOEM '98 Spec Header & Exhaust
Apexi Power FC (Self tuned)
Re: Dyno Sheets
Posted: July 20th, 2012, 5:54 am
by kes_vtec
B20B
12.1 CR
Skunk2 Pro 2 (1999)
Full ACT Kit
Ebay Headers
Hondata s300
2 1/2 piping
Re: Dyno Sheets
Posted: July 20th, 2012, 12:36 pm
by High_Speed_Imports
kes_vtec wrote:B20B
12.1 CR
Skunk2 Pro 2 (1999)
Full ACT Kit
Ebay Headers
Hondata s300
2 1/2 piping
vtech on or off?
Re: Dyno Sheets
Posted: July 28th, 2012, 4:49 pm
by red_dragon
B16a(auto engine) with s4c
rmf rep header ,2.5 exhaust
s300 self tuned
best was 141whp at 103tq 8200 redline
Re: Dyno Sheets
Posted: July 29th, 2012, 9:52 pm
by X2
It's old... but nothing really changed...
B18c1
compression bump
OEM ITR header
Short ram intake, custom 2.5" exhaust
owner built/owner tuned.
Re: Dyno Sheets
Posted: August 13th, 2012, 10:32 am
by kes_vtec
Vtec is no, but the motor rev to 8400 with the same tq
and this is Kazim first motor
B16A stock
with Skunk2 Tuner Cams Stage1
real stock DC5 with before and after K-Pro
High_Speed_Imports wrote:kes_vtec wrote:B20B
12.1 CR
Skunk2 Pro 2 (1999)
Full ACT Kit
Ebay Headers
Hondata s300
2 1/2 piping
vtech on or off?
Re: Dyno Sheets
Posted: August 13th, 2012, 3:09 pm
by CD4Accord
I'm hoping to have F20B2 non-vtec single cam dyno sheet to post for you within two weeks..
Any ideas what numbers I could or should be hoping for?
I'll post the mod list when I have the dyno done...
BTW.. Where is more convenient and affordable for pulls and a mild tune.. Santa Rosa or Mastuning?
Re: Dyno Sheets
Posted: October 28th, 2012, 11:44 am
by turbochinee
Stock DC5 with Mishimoto Intake and P2R Intake Manifold Gasket before and after kpro. Shitty tune done by me
Hence the reason for the dip in the power band between 4200 and 5200 rpm lol
Uploaded with
ImageShack.us
Re: Dyno Sheets
Posted: November 4th, 2012, 8:12 am
by alexfos101
D15Z4 Mini-me d15b vtec head swap
i/h/e
aem ems (Tuned by Tola's)
Re: Dyno Sheets
Posted: November 4th, 2012, 9:35 am
by kes_vtec
me likes...
alexfos101 wrote:D15Z4 Mini-me d15b vtec head swap
i/h/e
aem ems (Tuned by Tola's)
WP_000944.jpg
Re: Dyno Sheets
Posted: November 11th, 2012, 10:51 am
by keving MCc
nicely done alexfos
Re: Dyno Sheets
Posted: November 14th, 2012, 8:55 am
by alexfos101
keving MCc wrote:nicely done alexfos
thnx man
Re: Dyno Sheets
Posted: September 9th, 2014, 10:13 am
by Clerique
Dis ched ded?
Re: Dyno Sheets
Posted: September 10th, 2014, 2:51 pm
by X2
No new or other dyno'd builds maybe ?
Re: Dyno Sheets
Posted: September 10th, 2014, 9:03 pm
by r3iXmann
have to get a base map on the new ride..then time to buy some mods