Page 1 of 1
2Pc LCA Vs 1Pc LCA?
Posted: October 19th, 2014, 4:05 pm
by Da panty christ
Good day fellow tuners would like to know can I replace my (1) one piece front lower control arm with a (2) two piece lower control arm shown in the pic (99-00 HONDA CIVIC)? would the interchange fit up exactly or modifications have to be made?
Re: 2Pc LCA Vs 1Pc LCA?
Posted: October 20th, 2014, 7:22 am
by red_dragon
If you have physical access to both measure to confirm the geometry is the same
In additional you will have to change the sway bar links. The lower mounting is different.
from
to
Re: 2Pc LCA Vs 1Pc LCA?
Posted: October 20th, 2014, 10:42 pm
by Da panty christ
red_dragon wrote:If you have physical access to both measure to confirm the geometry is the same
In additional you will have to change the sway bar links. The lower mounting is different.
from
to
thank you info much appreciated going bamboo hopefully this week to check up the geometry of the both control arms...will do some more research on the sway bar link
Re: 2Pc LCA Vs 1Pc LCA?
Posted: October 26th, 2014, 9:32 pm
by enigma
Why would you want to do that though?
Re: 2Pc LCA Vs 1Pc LCA?
Posted: November 3rd, 2014, 10:44 pm
by Da panty christ
enigma wrote:Why would you want to do that though?
traction bar...
