Electrical issues

kevreem · Postby **kevreem** » November 2nd, 2016, 10:31 am

Hey guys back again so I did the swap front not vtec to 3 stage but I'm having some electrical issue .
First was a idle problem and a check light.
now I'm having a crank but no start issue . Hooked up an external coil. It started for a while. But not starting anymore.
Need some help .

HONDA spoilboy · Postby **HONDA spoilboy** » November 2nd, 2016, 11:06 am

Cam/ crank sensor! Idle problem. .. spray some wd40 in the ivac

black start · Postby **black start** » November 2nd, 2016, 11:20 am

For the idle issue, remove tb and service. Also, remove the iacv, disassemble, service and reinstall.

Check pcv valve ( it's above the oil filter)

Check for vacuum leaks

Could start with these before anything else.

There's also a self duagnostic feature on the car. Research how to and the error codes and try it

kevreem · Postby **kevreem** » November 2nd, 2016, 12:04 pm

Iacv was taken apart and cleaned. But I did some research and it turns out I need to do a intake swap from 3 wire to 2 wire.

kevreem · Postby **kevreem** » November 2nd, 2016, 12:11 pm

Dat was for the idle . Which I believed is solved but still have this . Crank no start issue now. did some tests and figured the coil was bad. Can't find a distributor right now . So I had a medalist coil hooked up to get spark.
It started for a while . But won't start anymore. Coil is working when u manually ground it off. But no current when tumbling. Checked the fuel system and ignitions fuse intact.