Moderator: 3ne2nr Mods
X_Factor wrote:i dunno much about these coatings...what exactly do they do?...im guessing prevention of rusting?...
if so...would regular underwashing/shock oil spray every 4mths or so be enuff?
Sanctifier wrote:Spray internal box sections + under the whole floorpan + wheelarches with:
------> Phosphoric acid (Wonder etc.) to avoid re-rusting.
------> (#1) Zinc Chromate Yellow Primer... or (#2) Red Oxide Primer using gun below... etc.
------> 3M Body Shutz... Rubberized undercoating... This is the BEST!
.......... using 3M applicator gun + wand to spray inside box sections.
------> FoamSeal Expanded Urethane Foam... If you have NO more air cavities left...
......... Then you have no more space for moisture to collect... and NO more rust.
BTW after "box sections" etc. don't forget under the floor-pan...
PAINT the complete floor-pan (yup... OVER the 3M Body Shutz) with epoxy paint or similar.
It protects undercoat and any future damage/cracking/rust is easily seen and corrected.
venum wrote:...who can you recommend for the spraying the underbody with the oxide coating??
Users browsing this forum: No registered users and 5 guests