TriniGT wrote:As far as I know the only way to know is to get them flow tested. Not sure who does that down here. If someone knows let me know ASAP.
There is another method of verification. Get a measurung cylinder around 300ml and good working fuel pump and dummy pressure regulator. Hook the pump up to a 12v source and click injector on for 15secs. Multiply result by 4 and you have your actual injector flow rate. Compare with pubilshed OEM infomation and you mwould know if the injector is up to task.
So this is what I have seen.
RB26 R33 and 32 units on 5U and 24U engines are 444cc. Measured 439cc average.
1993 RB25 JECS units are 370cc@3bar. Measured 365cc average out of 6.
Some SR20DETs and later Neo RB25s side feed are 370cc@3bar. Measured 375cc average out of 4
3SGTE side feed are 430cc@3bar. Measured 426cc average.
Audi S2 injectors 0180/0280 150 903 are 346cc measured 350cc average.
Ford Motor Sport 0280 150 608 are 440cc measured 436cc.
And so on...