Wire harness??

Coppershot · Postby **Coppershot** » June 2nd, 2004, 3:15 am

i know plenty stuff about but i duuno everything.(as yet) :lol:

but when somebody selling and an engine with harness cut ??

i not sure if the harness or the front clip is the same thing ???(could be the plug for all de wires)???

does that mean the ecu and the wires have to be rewired by an electrician.
and if so, is it possible to get the ecu wired up already so is a simple engine swap.

i hear is $1500 to do elertical for an sr20...i aint sure dat true but daz plenty $$.
So it it possible to get and engine with everything hook up already from the bamboo etc.

Postby **Dave** » June 2nd, 2004, 8:30 am

once the harness for the ecu connection is uncut then it's ok and $1500 for a wire ik really high i find
if you changing the type of engine, then more than likely you need an electrician to perform the rewire task for you
most harnesses can only be used on way and common sense would also dictate where some other jacks go

jackal · Postby **jackal** » June 2nd, 2004, 11:35 am

that is around the price to wire up an engine swap, from 1000 upwards

dragaholic · Postby **dragaholic** » June 2nd, 2004, 7:09 pm

I paid 800.00 do do ah honda

nismaniac · Postby **nismaniac** » June 2nd, 2004, 9:06 pm

$1000 to $1500

Postby **art n motion** » June 2nd, 2004, 10:37 pm

well I paid $350 for my conversion...that is to do the wiring :mrgreen:

Coppershot · Postby **Coppershot** » June 2nd, 2004, 10:51 pm

art n motion wrote:well I paid $350 for my conversion...that is to do the wiring

what engine swap u did? a friend a mine looking to swap ga16 ,sr18 or sr20.

Postby **art n motion** » June 2nd, 2004, 11:01 pm

I went from CA16de to CA18det.....

powdedd · Postby **powdedd** » June 4th, 2004, 3:13 pm

IT REALLY COST ALOT TO GET WIRED UP. PART OF MY HARNESS WAS MISSING AND AN AUTO ELECT. TELL ME $2500 TO WIRE UP DE HARNESS. I SAY TO HELL WITH HE, WENT ON THE NET AND GET A WIRING DIAGRAM AND A PIN OUT DIAGRAM AND DID IT MY SELF. THAT WAS 2 YRS AGO AND NEVER HAD ANY PROBS. IT AINT HARD IF YOU KNOW A LITTLE BOUT IT, GET THE INFO AND TRY.

Coppershot · Postby **Coppershot** » June 5th, 2004, 4:40 am

powdedd wrote:IT REALLY COST ALOT TO GET WIRED UP. PART OF MY HARNESS WAS MISSING AND AN AUTO ELECT. TELL ME $2500 TO WIRE UP DE HARNESS. I SAY TO HELL WITH HE, WENT ON THE NET AND GET A WIRING DIAGRAM AND A PIN OUT DIAGRAM AND DID IT MY SELF. THAT WAS 2 YRS AGO AND NEVER HAD ANY PROBS. IT AINT HARD IF YOU KNOW A LITTLE BOUT IT, GET THE INFO AND TRY.

what engine u did that for? i saw some pin diagrams for sr20 and integra /civic engines some time back. i just need to get digram and follow colour codes etc and solder some wires and still have $2500 in the pocket.

dat sound like a plan... :lol: