first attempt at adjusting the e brake in the starbo, working with the lift of the brake from the centre console is pretty straight forward so no scene....but if i want to adjust the tension of the lock how'd i go about doing that from the rear axle? i have rear disc/calipers. help?
BELOW THE E-BRAKE HANDLE THERE SHOULD BE A 10 BOLT WHICH IS A TENSIONER DAT WILL STIFFEN UP THE D CABLE I DONT THINK U CAN DO IT FROM THE REAR AXEL UNLESS U REPLACE THE SPRINGS ON THE CALIPERS WITH ONE OF A HIGER SPRING RATE
