Moderator: 3ne2nr Mods
turbohead wrote:bro you selling teh gtir steering by chance, give me a call 4952320
Black Start wrote:sr20 harness plentiful in trinidad. you can definitely locate one here on the forums, but the shipping part I don't know off
yakuza wrote:Black Start wrote:sr20 harness plentiful in trinidad. you can definitely locate one here on the forums, but the shipping part I don't know off
He's looking for a B13 GTS engine bay harness, not the engine harness.
yakuza wrote:Kariba why go through the trouble of looking for a GTS engine bay harness?
It won't be 100% compatible with your low port engine harness..... B13 GTS comes with the high port motor.
Just get a good electrician to wire it up.
turbohead wrote:i could understand wanting the original look but finding dat harness down here is like a needle in a haystack, there are many good electricians out here dat will do really neat work if dat is wat you looking at. try using the flex loom wit shrink wrap to get a really mean and neat look from the finish.
but still sell meh the steering nah hoss, or if you hav a link for another..
Kariba wrote:I wanted it to look factory that's all. Thanks.
yakuza wrote:Kariba wrote:I wanted it to look factory that's all. Thanks.
It still won't be plug and play, you are using the newer model low port engine in a vehicle that never came with that engine.
yakuza wrote:Black Start wrote:sr20 harness plentiful in trinidad. you can definitely locate one here on the forums, but the shipping part I don't know off
He's looking for a B13 GTS engine bay harness, not the engine harness.
Kariba wrote:Surprisingly the RR engine harness plugs right into my under-dash harness.
yakuza wrote:A word of advice, ditch the aluminium crank pulley.
You WILL have premature bearing failure.
Users browsing this forum: No registered users and 30 guests