TriniTuner.com  |  Latest Event:  

Forums

*OFFICIAL NISSAN B11 CLUB*

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
mastamind17
Street 2NR
Posts: 90
Joined: February 27th, 2009, 8:18 pm
Location: Tunapuna

Re: *OFFICIAL NISSAN B11 CLUB*

Postby mastamind17 » June 11th, 2013, 9:51 am

sunny_boi I didn't move anything. That noise came after I had the cradle bushings changed. The bushings weren't making noise but I saw one burst so I had my mechanic change all four.
I look for my trouble yes...

Also to hear a slightness of the noise if I bounce the front of the car really really hard I hear it.

Advertisement
User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 11th, 2013, 10:02 am

mastamind17 wrote:
black start wrote:hmmmm, that's a strange one.....


eyy dan you up on my side any time today?


no bro sorry. But sometime this week I'll be in school so you could pass and check me and I'll take a look at it for you....

User avatar
mastamind17
Street 2NR
Posts: 90
Joined: February 27th, 2009, 8:18 pm
Location: Tunapuna

Re: *OFFICIAL NISSAN B11 CLUB*

Postby mastamind17 » June 11th, 2013, 6:42 pm

I finally found the problem. The place where I pressed the bushings eff em up ..the man bend up two bushings and that was causing the noise. Steups

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 11th, 2013, 7:31 pm

go polyurethane one time..soft polyurethane though...it works!!!

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 11th, 2013, 10:38 pm

where you getting the poly urethane bushing for the b11?

Also, i didn't get a chance to check the b14 evaporator today, got a little ties up....

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 12th, 2013, 8:09 am

there's a machine shop that imports billet's in different sizes, they just cut and turn down to suite, i did everything from bushings to mounts, the ride not that rugged and no vibrations, located in williamsville.

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 12th, 2013, 10:02 am

and how was the price to do it?

also a contact number would be fine...

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 12th, 2013, 10:36 am

Rodney's machine shop #40 garth road,princess town(way shorter from williamsville side)...366-3489,
the bushing's cost like 400 a cradle for front and 500 rear, the largest engine mount cost me 600 to do.

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 12th, 2013, 10:56 am

Well that's not bad at all......

Mounts is not really a problem for me, but the poly bushings seem to be a good idea.....

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 13th, 2013, 6:13 pm

d_sunnyboi wrote:ey black start...7 5/8'' x 8 1/2'' x4''



b14 evaporator

9 1/4" x 8 7/8" x 2 7/8"

b14 evaporator in housing with blower housing
Image
Image

evaporator
Image
Image

kinda dirty but you get the idea still
Image



and last but not least, my helper...
Image

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 13th, 2013, 6:15 pm

sunnyboi, what's the dimension of the foreign evaporator?

and can't the foreign evaporator and housing work on the local mixer/blower box in the sunny?

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 13th, 2013, 6:18 pm

if you can get the evaporator housing to mate up to the b11 blower it would would good seeing it has 20 rows!!!...also i got 2 foreign evaporators, i used one in my car and i have to second one if you are interested!

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 13th, 2013, 6:20 pm

yes the foreign works back up in same position no difference..

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 13th, 2013, 6:26 pm

what price you looking at for the foreign evaporator and housing??

I still having hope of modifying this b14 complete blower housing and evaporator to work, but if it doesn't work, I may have to check you....

I find the airflow out of the b11 (or mine at least) is a bit low compared to the b14 and so I wanted to try to get it to work......

I had actually scrapped out the dash before to fit it, but then i was getting a good deal on another b11 and just installed back everything to sell the sunny. The car ended up selling and so I kinda out myself up...

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 13th, 2013, 6:29 pm

i bought it for $550..from pit also have the bill...i bought it cuz i know you were looking for one, so let me know...

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » June 13th, 2013, 6:35 pm

pit prices not as bad as they were before. 550 not bad for a fresh foreign evaporator....

Well I trying this b14 conversion first and if it doesn't work I'll check yuh.
From my previous muck up, I found the b14 evaporator can't line up directly on the b11 blower housing/mixer box without having to drill holes on the firewall for the ac lines. I didn't want to do this....

I was going to cut the mixer box and install the b14 evap+blower on it, but it required a piece of ducting to be made, which I never got around to doing....

Going and scrap back out the dash tomorrow and start playing a/c man tomorrow...

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 13th, 2013, 6:39 pm

what about placing the b14 evaporator direct to the blower box and using the part of the evaporator housing, mold the evap housing to the blower box directly.....orrr right the lines i now thinking back about that part...well fix up if you don't take it i'll just post it up for sale...

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 17th, 2013, 8:39 am

just a small update on the difference the foreign evaporator made...BIG difference!!!..it's so cold on low when cool/raining that i turn off the compressor intermittently...and holds it down pretty well in 12pm hot blazing sun...

User avatar
turboconch2
3NE 2NR for life
Posts: 226
Joined: April 14th, 2009, 12:19 pm
Location: South

Re: *OFFICIAL NISSAN B11 CLUB*

Postby turboconch2 » June 17th, 2013, 10:51 am

^ hey glad to hear you got through, how did you do it, did you use the complete foreign set up on the blower or did you have to change the housing and line fittings?

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 17th, 2013, 10:58 am

it was just to change the evaporator and housing, the lines were modified via aluminum welding, just the end fittings itself..i have an extra one also if you know anyone interested.

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » June 18th, 2013, 9:49 pm

i have a pair of b11 (short) bumpers for sale, front and back with indicator lights, in excellent condition

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » July 9th, 2013, 6:18 pm

i have a front pair of ''Z10 MODIFIED TEIN COILOVERS'' for sale....offer something for it!!...i had them on my car before i did the sr20 change over, they worked great for everyday use, not stiff but stiffer than stock shock absorber's! and wicked a$$ ride height...hear is what was done to them, the [b]shock head[/b] was replaced with ''B11'' and where it [b]bolted to the spindle was cut and replaced with bolt spacing B15/Y11/N16 etc[/b] but [b]at the width of the B11[/b] spindle!!!!
Attachments
006.JPG
005.JPG
004.JPG

User avatar
JUS4SHO
3NE 2NR Moderator
Posts: 9653
Joined: April 22nd, 2003, 11:06 am
Location: N/A
Contact:

Re: *OFFICIAL NISSAN B11 CLUB*

Postby JUS4SHO » July 14th, 2013, 10:15 pm

ImageUploadedByTriniTuner1373854428.551969.jpg

ImageUploadedByTriniTuner1373854448.040997.jpg

This was from 2001 or 2002. The love off my life. PAM1955. I miss that car so much.

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » July 14th, 2013, 10:18 pm

^nice car man...

you ran it in the dex?

User avatar
Jahflame
3NE 2NR for life
Posts: 219
Joined: March 10th, 2006, 3:47 pm
Location: On the road to Zion
Contact:

Re: *OFFICIAL NISSAN B11 CLUB*

Postby Jahflame » August 2nd, 2013, 6:26 am

Jus joined the club anf I'd like to know where I can get the foreign headlights and grill. I have the small lights

User avatar
black start
TriniTuner 24-7
Posts: 7730
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: *OFFICIAL NISSAN B11 CLUB*

Postby black start » August 2nd, 2013, 6:48 pm

I know a place selling foreign grills for 300. The have lights too new brand but not original.

User avatar
d_sunnyboi
Sweet on this forum
Posts: 299
Joined: April 30th, 2010, 8:13 pm
Location: trinituner.com

Re: *OFFICIAL NISSAN B11 CLUB*

Postby d_sunnyboi » August 2nd, 2013, 10:56 pm

marude's

User avatar
Jahflame
3NE 2NR for life
Posts: 219
Joined: March 10th, 2006, 3:47 pm
Location: On the road to Zion
Contact:

Re: *OFFICIAL NISSAN B11 CLUB*

Postby Jahflame » August 3rd, 2013, 10:48 am

Thanks yo! Contact # and location? @d_sunnyboi when my Sunny grow up I want it to look like yours

1234carz
Riding on 13's
Posts: 3
Joined: June 26th, 2013, 5:03 pm

Re: *OFFICIAL NISSAN B11 CLUB*

Postby 1234carz » August 19th, 2013, 1:53 pm

Hey i would like to no were can i get some foreign used door upholstery

User avatar
Soochi boi
Street 2NR
Posts: 73
Joined: March 20th, 2012, 8:15 pm

Re: *OFFICIAL NISSAN B11 CLUB*

Postby Soochi boi » September 21st, 2013, 5:00 pm

Rear suspension crack again after being welded on both sides , any suggestions ? What could be the cause of this ? Replacement options ? Thanks

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: Baidu [Spider] and 2 guests