Nissan B15 Owners Club

playerskrew · Postby **playerskrew** » July 20th, 2016, 8:33 pm

Fellas ah change my cam and crank sensors and since then i keep hearing a very slight ratchet sound when pulling off for 2 seconds then it goes away. But no problems with performance. Any ideas?

spaluchin · Postby **spaluchin** » July 28th, 2016, 12:08 pm

B15 drivers. What is a good brand of brakes to use? bought my b15 last year and this my first time changing brakes

Seeker · Postby **Seeker** » August 10th, 2016, 8:59 am

I use Wagner. Very quiet. The price is around $220 I think.

locorolla · Postby **locorolla** » August 10th, 2016, 9:08 am

i use wagner as well.....forget those cheap brands.....don't cheap out for something like brakes.....

Sent from my SM-G531H using TriniTuner mobile app

AnarkIII · Postby **AnarkIII** » September 28th, 2016, 9:04 pm

zyde09 · Postby **zyde09** » November 27th, 2016, 9:32 pm

Fellas I looking for fogs with the trim around the light for the face lift b15. Any ideas where I could get them. Dualstar, dollarsavers and bobby's doesn't have at the moment.

zyde09 · Postby **zyde09** » November 27th, 2016, 9:36 pm

Fellas I looking for fogs with the trim around the light for the face lift b15. Any ideas where I could get them. Dualstar, dollarsavers and bobby's doesn't have at the moment.

locorolla · Postby **locorolla** » December 16th, 2016, 12:12 pm

anybody have a set of seats in very good condition to sell?

nilgoat · Postby **nilgoat** » January 4th, 2017, 10:46 am

locorolla wrote:anybody have a set of seats in very good condition to sell?

What color you need?

kingsingh · Postby **kingsingh** » January 4th, 2017, 7:50 pm

zyde09 wrote:Fellas I looking for fogs with the trim around the light for the face lift b15. Any ideas where I could get them. Dualstar, dollarsavers and bobby's doesn't have at the moment.

Is this for the new model B15?

kingsingh · Postby **kingsingh** » January 4th, 2017, 7:50 pm

If you want it in cream contact 757 9121

zyde09 · Postby **zyde09** » January 5th, 2017, 10:29 pm

kingsingh wrote:
zyde09 wrote:Fellas I looking for fogs with the trim around the light for the face lift b15. Any ideas where I could get them. Dualstar, dollarsavers and bobby's doesn't have at the moment.

Is this for the new model B15?

Yeah, new model. Circular fog lights

Spaulding24 · Postby **Spaulding24** » June 19th, 2017, 1:17 am

Got 15k... anybody got a b15 for that price?

Kristophe9019 · Postby **Kristophe9019** » July 10th, 2017, 11:33 am

LF original mats for my B15

locorolla · Postby **locorolla** » July 10th, 2017, 12:23 pm

i got a nice set of rubber mats with the Nissan logo on them from a parts place in Curepe....NVR Auto

Sent from my SM-G531H using TriniTuner mobile app

BrandoHD · Postby **BrandoHD** » August 17th, 2017, 4:03 pm

Fellas, looking for shocks and cradle arms, where is the best place to get them?

TurboSingh12 · Postby **TurboSingh12** » August 18th, 2017, 7:11 am

BrandoHD wrote:Fellas, looking for shocks and cradle arms, where is the best place to get them?

New or used?

aidan · Postby **aidan** » September 21st, 2017, 3:43 pm

Anyone know where to get the IH01 headlamp bulbs locally? I bought the H4B but the high beam is useless due to the filament position, it only lights up in front the car under the cutoff of the low beam.
I have an IH01 from a f.used headlamp and the high and low beam show on the road properly.

TurboSingh12 · Postby **TurboSingh12** » October 5th, 2017, 2:37 pm

I have a VZR B15 for sale 50k.Inbox who ever interested .

superstainless1250 · Postby **superstainless1250** » April 17th, 2018, 11:56 am

Guys good day looking for 4 B15 doors complete with upholstery the car is a PBR same colour upholstery plz Thank you all

locorolla · Postby **locorolla** » April 17th, 2018, 1:17 pm

all i have is the door upholstery for the driver door.....lemme know 755-8848

locorolla · Postby **locorolla** » May 2nd, 2018, 10:28 am

Good day,

I need to know if the rear solid axle / cross member can be used with the rear disc brakes or would I need to swap out the entire solid axle complete with the rear disc brake spindles.....

The solid axle and the centre torsion bar on the one I bought with the disc brakes is a bit corroded so I would prefer to use back my original solid axle and torsion bar.

Any assistance / advice is appreciated.

Kevin
755-8848

skylinechild · Postby **skylinechild** » May 4th, 2018, 10:36 am

locorolla wrote:Good day,

I need to know if the rear solid axle / cross member can be used with the rear disc brakes or would I need to swap out the entire solid axle complete with the rear disc brake spindles.....

The solid axle and the centre torsion bar on the one I bought with the disc brakes is a bit corroded so I would prefer to use back my original solid axle and torsion bar.

Any assistance / advice is appreciated.

Kevin
755-8848

you have a b15

you want to install rear wheel disc brakes.
you got a complete banjo from the bamboo.... f used but it rusty....

you want to swap over the ends alone - ie the caliper and rotor assembly onto your banjo to prevent using the rusty up banjo....

it may not work as your banjo - if drum. - lacks the necessary brackets to hold the caliper in place.... also it lacks the brackets to hold the hand brake cable .

if you are able to bolt the calipers on successfully... and they work - you wont be able to use the hand brakes as they are different...and there is no way for you to bolt on the hand brake cables onto thr banjo...

dissassenble one end of the banjo..... and jack up your car and remove the complete hub assembly and you'll see it.

ppl just end up using a complete p11 rear banjo and do some magic with the shock mounts to get it to work...

doubleseater · Postby **doubleseater** » June 30th, 2018, 11:46 am

good day fellas, anyone cud tell me where i cud get a body kit for b15 the new model?

aidan · Postby **aidan** » September 30th, 2018, 9:43 pm

Anybody could tell me how to remove the back seat to get to the back dashboard? I get the bench part off but the backrest giving me pressure

locorolla · Postby **locorolla** » December 14th, 2018, 9:08 am

once the bench is out, there are 2 or 3 12mm bolts holding down the base of the backrest part of the back seat.
Once you remove those bolts, you need to use some force to raise the entire backrest upwards because the top-back of the backrest is held in place by 3 hooks.
Any further advice, contact me 755-8848.