TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
olton wrote:What about the 'no-tools' check?
The procedure is like
- Check for TPS connectivity (optional)
- Warm up the engine
- Turn ignition from ON to OFF two more times, then OFFF
- Turn on in 'P' and verify that the CVT lamp lights for 2 sec
- Turn OFF
- Press the brake, and shift to 'D'
- Turn ignition ON
- Release brake and shift to 'L'
- Fully depress both brake & gas. Do not release, and shift back to 'D'
- Read the lamp
4th flicker out of ten being longer than the others points to the stepper
The full crap is on page AT-25 of the FSM
Users browsing this forum: No registered users and 22 guests