Tiida not starting after battery/deck swap.

[playerskrew]

Ok tiida tech fellas:
I took off the battery pole to change my deck after changing it i put back on my battery pole and when i turn on the key im getting ignition the headlights and fan coming (it not supposed to) but no crank, all the fuses good did a scan and it showed a P1610 lock out code. none of the windows or lights working with the switch with the ignition on. it has a smart key but the fob not working so im using the key alone.
and the car was working good before..

[cosmo]

ESCAPE FROM LOCK MODE
1. Turn ignition switch OFF.
2. Turn ignition switch ON with registered key. (Do not start engine.) Wait 5 seconds.
3. Return the key to OFF position.
4. Repeat steps 2 and 3 twice (total of three cycles).
5. Start the engine.

[cosmo]

Try this and see if it works

[playerskrew]

ESCAPE FROM LOCK MODE
1. Turn ignition switch OFF.
2. Turn ignition switch ON with registered key. (Do not start engine.) Wait 5 seconds.
3. Return the key to OFF position.
4. Repeat steps 2 and 3 twice (total of three cycles).
5. Start the engine.

h

Tried it and nothing.

[krossbreed]

You may have to get the system reprogrammed

[playerskrew]

You may have to get the system reprogrammed

Them key programming people does do that ?

[krossbreed]

Yep.

[playerskrew]

Found the problem it was a broken wire in the main harness. Happened while passing the 4 gauge power cable.