TriniTuner.com  |  Latest Event:  

Forums

B14

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

Trojanman
Riding on 13's
Posts: 7
Joined: July 18th, 2018, 10:50 am

B14

Postby Trojanman » January 14th, 2019, 9:36 am

How to take out throttle body to clean it?

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: B14

Postby skylinechild » January 14th, 2019, 3:53 pm

Trojanman wrote:How to take out throttle body to clean it?


it not that hard... youtube some videos it will show you how.

1996 nissan sentra - type that in on youtube along with a few other words like throttle body cleaning etc...

a vid will eventually pop up....


if u still unsure you can check a tuner called anil sooknanan. he a car guy an can sort you out.

N15Pulsar
Riding on 13's
Posts: 5
Joined: January 14th, 2019, 10:06 pm

Re: B14

Postby N15Pulsar » January 14th, 2019, 10:08 pm

I feel like I getting a flat spot in my car when I press the gas and if I let go a quarter inch, I picking up idk what it is

User avatar
jahs0ldi3r
Trinituner Peong
Posts: 421
Joined: June 24th, 2014, 6:12 am

Re: B14

Postby jahs0ldi3r » January 17th, 2019, 7:17 am

N15Pulsar wrote:I feel like I getting a flat spot in my car when I press the gas and if I let go a quarter inch, I picking up idk what it is
Take off the cold air intake and air filter box, loosen the large house clamp that secures it to the manifold, disinfect and jacks...off!

Just don't let the idle air sensor get the cleaning fluid on it, or else you will be looking for another throttle body like I was. It's a ga15 throttle body issue, most others can take it.

Best way to clean is to wet a cloth with the cleaning fluid and wipe. Don't spray directly into throttle body.

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 24 guests