TriniTuner.com  |  Latest Event:  

Forums

How to Access Y12 AD cabin filter

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
X_Factor
TriniTuner 24-7
Posts: 9107
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

How to Access Y12 AD cabin filter

Postby X_Factor » September 10th, 2019, 10:55 pm

I want to change the AC filter, I have located it
but i am not sure how to remove the compartment on the passenger side to access the filter
I tried removing 4 screws on the compartment but still cannot get it off

any help?

Advertisement
User avatar
X_Factor
TriniTuner 24-7
Posts: 9107
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: How to Access Y12 AD cabin filter

Postby X_Factor » September 15th, 2019, 11:26 am

Anyone

Browns Auto
Riding on 13's
Posts: 3
Joined: March 18th, 2018, 3:18 pm
Location: Princes Town
Contact:

Re: How to Access Y12 AD cabin filter

Postby Browns Auto » September 17th, 2019, 12:09 pm

https://youtu.be/Ss8grMK435M

It basically the same process as the Versa just it’s on the opposite side. Hope this helps

User avatar
X_Factor
TriniTuner 24-7
Posts: 9107
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: How to Access Y12 AD cabin filter

Postby X_Factor » September 17th, 2019, 1:01 pm

The y12 ad is different
I got through

Sundar
Riding on 17's
Posts: 1339
Joined: July 5th, 2012, 12:33 pm
Location: Rock Road
Contact:

Re: How to Access Y12 AD cabin filter

Postby Sundar » September 19th, 2019, 12:16 pm

X_Factor wrote:The y12 ad is different
I got through

Please enlighten us.

User avatar
X_Factor
TriniTuner 24-7
Posts: 9107
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: How to Access Y12 AD cabin filter

Postby X_Factor » September 20th, 2019, 4:29 pm

4 screws
Two at the inside top
Two at the bottom

Pry out the entire AC vent all the way to the windscreen the entire thing comes off

You will see another screw when it's removed

To the left side there are two small finishers that need to come off

Then you pry/ twist the either compartment and it should unsnap easily
If your y12 ad has the 100w outlet it you pry around the outlet
The entire pocket compartment comes out

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 20 guests