Ford Cortina MK4 project

nere · Postby **nere** » May 13th, 2016, 3:41 am

Now started the Ford Cortina MK4 project. Will be looking for some interior parts if you guys can help in where I can get them please. Pictures of the project will be coming soon. Also considering selling as is also if anyone is interested. You can call 6201156 or pm me for info.

red_dragon · Postby **red_dragon** » May 14th, 2016, 10:29 am

good man
keep it up and one day

zoom rader · Postby **zoom rader** » May 14th, 2016, 10:43 am

Hey I have a neighbour that had 2L pinto engine with gearbox for sale. He took it out of a Giha

nere · Postby **nere** » May 14th, 2016, 10:55 am

this one has the same set up but I will keep it in mind if i need any parts.
right I looking at doing all the patch work which is not much and preparing the car for painting (not painting till i finish the engine and it's bay. after that is the brakes and suspension, but i looking at keeping the car fully original down to the deck also...

nere · Postby **nere** » May 17th, 2016, 12:11 pm

Ok the second thing done so far is to give the car a full clean. So far the doors, dash board and the outside were cleaned pics will be posted later. Going to clean the engine bay, the floor interior, take the stickers off the car tomorrow.by Friday going to see about the brakes one may have seized up.

nere · Postby **nere** » May 26th, 2016, 5:15 pm

Ok today we tried to start the car, it not starting yet looking like it may be the starter or the fuse box needs to change or both needs to. Do anybody have starter and fuse box this model car???

nere · Postby **nere** » July 5th, 2016, 10:04 pm

: 20160701_171918.jpg (89.5 KiB) Viewed 5648 times

nere · Postby **nere** » July 6th, 2016, 9:53 am

: 20160704_102933.jpg (80.17 KiB) Viewed 5629 times

nere · Postby **nere** » July 6th, 2016, 10:00 am

more pics

rspann · Postby **rspann** » July 6th, 2016, 4:29 pm

Dog, you have to pull out every thing ,harness, upholstery, windscreens fenders . Clean it up properly then start to work . Pack away everything ,label it even if you not planning to use it back. This will make the restoration easier.
Take off the suspension, scrap it down clean it and replace what is bad. Clean and paint every thing as you mounting back up.

Morpheus · Postby **Morpheus** » July 6th, 2016, 6:27 pm

Nice. Good Luck

Black Scorpion · Postby **Black Scorpion** » July 6th, 2016, 9:53 pm

Check trinicarsforsale...saw a cortina under parts

nere · Postby **nere** » August 20th, 2016, 11:06 pm

Ok fellers this project may have to be put on hold but willing to sell come and offer something....the engine will be completed by the end of the month. price am considering is $5000 neg.