TriniTuner.com  |  Latest Event:  

Forums

WTk adhesive to hold on door

(I.C.E.)In Car Entertainment - Mobile Audio and Video

Moderator: 3ne2nr Mods

User avatar
kurpal_v2
TriniTuner 24-7
Posts: 11909
Joined: December 28th, 2007, 9:17 pm
Location: Chilling with Akeem

WTk adhesive to hold on door

Postby kurpal_v2 » July 16th, 2012, 10:30 am

Guys I've got a slightly annoying rackle on my doors comming from my midbass.


I have a lot of dacron and think this would solve the problem.


What would you advise I use to attach a layer of the Dacron to the door card?

The usual spray on glue should work?

Advertisement
User avatar
nervewrecker
TriniTuner 24-7
Posts: 18206
Joined: July 31st, 2007, 2:27 pm
Location: Gone with Leroy mudda, not Paranging though

Re: WTk adhesive to hold on door

Postby nervewrecker » July 16th, 2012, 10:33 am

a few beads of silicone or 2 way tape maybe?

The silicone will be easier to remove though.

User avatar
nigel1977
punchin NOS
Posts: 4044
Joined: April 27th, 2004, 8:00 pm
Contact:

Re: WTk adhesive to hold on door

Postby nigel1977 » July 16th, 2012, 11:23 am

I have about 12 pounds of sound damping on mine. That helped.

User avatar
silent_riot
punchin NOS
Posts: 4314
Joined: December 26th, 2004, 11:40 pm
Location: Pumpitating
Contact:

Re: WTk adhesive to hold on door

Postby silent_riot » July 16th, 2012, 12:29 pm

Closed cell foam will help too.

User avatar
carfreak1024
I LUV THIS PLACE
Posts: 1050
Joined: November 5th, 2007, 9:02 pm
Location: Trinidad, Maracas
Contact:

Re: WTk adhesive to hold on door

Postby carfreak1024 » July 16th, 2012, 3:22 pm

nigel1977 wrote:I have about 12 pounds of sound damping on mine. That helped.



just asking a question here. But i was reading online that when using vibration damping it is only necessary to dampen 25% of the panel itself, beyond that you wasting time. And if you would like to lessen the noise even further, a better method to use would be to use a MLV or CCF I believe it is.

From what i was reading online that is the more efficient way to sound deaden the door.

User avatar
Soundstream_626
Riding on 17's
Posts: 1381
Joined: March 13th, 2005, 8:01 pm
Location: san juan
Contact:

Re: WTk adhesive to hold on door

Postby Soundstream_626 » July 16th, 2012, 6:15 pm

The closed cell foam worked for me. Also put some thin e-dead around the 90degree edges that touch the door metal.

User avatar
kurpal_v2
TriniTuner 24-7
Posts: 11909
Joined: December 28th, 2007, 9:17 pm
Location: Chilling with Akeem

Re: WTk adhesive to hold on door

Postby kurpal_v2 » July 16th, 2012, 6:34 pm

Soundstream_626 wrote:The closed cell foam worked for me. Also put some thin e-dead around the 90degree edges that touch the door metal.




Closed cell foam does seem to be the best item but I have 12-15yrs of dacron at home so given the opportunity I dont mind using it out.




Soooo spray glue should work?

User avatar
silent_riot
punchin NOS
Posts: 4314
Joined: December 26th, 2004, 11:40 pm
Location: Pumpitating
Contact:

Re: WTk adhesive to hold on door

Postby silent_riot » July 16th, 2012, 7:07 pm

Imo, don't waste time with that.
CCF.

User avatar
Lance
30 pounds of Boost
Posts: 2558
Joined: June 21st, 2005, 7:49 am
Location: Arima<->Leeds

Re: WTk adhesive to hold on door

Postby Lance » July 17th, 2012, 8:01 am

The CCF would be a bit more resistant to any sort of moisture as well.

User avatar
altec
I LUV THIS PLACE
Posts: 901
Joined: April 18th, 2003, 6:40 pm
Location: Land of Destruction

Re: WTk adhesive to hold on door

Postby altec » July 17th, 2012, 8:09 am

where to get closed cell foam to buy?

User avatar
nigel1977
punchin NOS
Posts: 4044
Joined: April 27th, 2004, 8:00 pm
Contact:

Re: WTk adhesive to hold on door

Postby nigel1977 » July 17th, 2012, 11:40 am

carfreak1024 wrote:
nigel1977 wrote:I have about 12 pounds of sound damping on mine. That helped.



just asking a question here. But i was reading online that when using vibration damping it is only necessary to dampen 25% of the panel itself, beyond that you wasting time. And if you would like to lessen the noise even further, a better method to use would be to use a MLV or CCF I believe it is.

From what i was reading online that is the more efficient way to sound deaden the door.


Excellent advice. Im going to strip out the 30something sq ft of damping from each of my front doors now I know that I've wasted my time. I guess 675wrms on an 8.5" woofer, hp at 35hz, doesnt require more than 25% coverage.

Advertisement

Return to “I.C.E. / Car Audio Tech”

Who is online

Users browsing this forum: No registered users and 2 guests