RCF VS 18 SOUNDS

[kaotik]

WHICH IS D BETTER OVERALL SPEAKER

[Zero-Cool]

boy dat hard cause rcf and 18 sound is basically de same ppl cause is rcf engineers who start there own company and called it 18sound


but my personal preference is de 18sound.

[kaotik]

WA BOUT PRICE

[Soundstream_626]

ive heard both an to me d clarity of d 18 sound is better than teh rcf

[daymean]

i havent owned rcf but i have owned and still own ah pair ah 8 inch 18 sound
they are loud and maintains clarity
doesent take much power for them 2 get loud either i only pushing 100rms to each
sounds really loud believe me!
no regrets in purchasing them
paid $1500 for the pair.

[Anton]

can't go wrong with "made in italy"

[daymean]

hehe yer man ^^^ !
18 sound made in italy yes
when ah get them i was all like them ting made in ITALY!
hehehee!

[Xman]

your question should be which side do i go........18sounds (the atomics) Steves Electronics or RCF (the juggernauts) Sound effects MATTS professional audio


cause both is the same!!!!

[droppa]

was the price comparison ppl, i in quest.

[richiepooh]

RCF's ALLLLLL THEEEEE WAAAAYYYYYYYYY.................

[OffshoreMarketing]

lol daz what im thinking...they rnot the same but both r very good i persoally liek rcf all d way buh 18 sound mashing upd dance

[ShaKarz]

BEYMA!!! ... go 18 sound boi...

[boomin8]

RCF fella they dam loud an has very good clarity

[kaotik]

ne prices on the 10s?

[Anton]

Heard two pairs on 6"s 18sound in an install yesterday. It was INSANE that 4 6s would be loud and maintain clarity. The secret to fully utilizing thse speakers would be to use them with some GOOD passive crossovers. They eliminate the harshness of the sound when the spekers try to play the higher frequencies.......... IMHO

[SR]

yes but either way no clean mid bass

[Xman]

Xman wrote:
your question should be which side do i go........18sounds (the atomics) Steves Electronics or RCF (the juggernauts) Sound effects MATTS professional audio


cause both is the same!!!!

you know wha de hell you talkin bout ?

Boy u is ah a$$

[Anton]

yes but either way no clean mid bass

I disagree. The 6s were sounding really ambitious with the lower frequencies. With a proper, maybe bandpass config with an electronic crossover, they would really shine.

[Xman]

Pioneer wrote:

who tell you steve's sponsor a car ?

Did I say anything bout sponsoring a car or being in car shows????

[SR]

yes but either way no clean mid bass

I disagree. The 6s were sounding really ambitious with the lower frequencies. With a proper, maybe bandpass config with an electronic crossover, they would really shine.

what frequency range do u consider as mid bass

[OffshoreMarketing]

well mos to f those 6's arent designed to play midbass really(not that they cant)what wud be ideal is a pair of dedicated 8"s in the doors alongside them just for midbasss n highpass those 6's just for high mids..

[Anton]

what frequency range do u consider as mid bass

From bout 100hz to 400hz

[SR]

mid bass is actually from 60Hz to 200Hz

[Anton]

Cool. But for 6s i still find they ambitious. What do you recommend for midbass?

[SR]

depends on what else u runnin if you are using rcf etc type speakers for midrange you will need minimum an 8" driver to use for mid bass as these speakers have a high sensitivity rating and tend to play mdrange frequancies quite loud

[OffshoreMarketing]

yeh the 6 inch plays high midss real loud alot of ppl use rfc 10's paired withthe 6's to play themidbass or a a coupl e8's

[kaotik]

ne other ideas ne one

[audioaddix]

18 sounds all d way fellas......also have some db drives 8" playing low mids really sweet....

[nervewrecker]

how low is your low mids?

[shake d livin wake d dead]

no B&C no care